Emission Factors of Air Toxics from Semiconductor Manufacturing in Korea

Abstract

The development of local, accurate emission factors is very important for the estimation of reliable national emissions and air quality management. For that, this study is performed for pollutants released to the atmosphere with source-specific emission tests from the semiconductor manufacturing industry. The semiconductor manufacturing industry is one of the major sources of air toxics or hazardous air pollutants (HAPs); thus, understanding the emission characteristics of the emission source is a very important factor in the development of a control strategy. However, in Korea, there is a general lack of information available on air emissions from the semiconductor industry. The major emission sources of air toxics examined from the semiconductor manufacturing industry were wet chemical stations, coating applications, gaseous operations, photolithography, and miscellaneous devices in the wafer fabrication and semiconductor packaging processes. In this study, analyses of emission characteristics, and the estimations of emission data and factors for air toxics, such as acids, bases, heavy metals, and volatile organic compounds from the semiconductor manufacturing process have been performed. The concentration of hydrogen chloride from the packaging process was the highest among all of the processes. In addition, the emission factor of total volatile organic compounds (TVOCs) for the packaging process was higher than that of the wafer fabrication process. Emission factors estimated in this study were compared with those of Taiwan for evaluation, and they were found to be of similar level in the case of TVOCs and fluorine compounds.     

Humidity- and Age-Tolerant Starch-Based Sponge for Loose-Fill Packaging

Loose-fill packaging sponges were extruded from mixtures of 54–62% hydroxypropylated (HP 5%) amylomaize V (50% amylose) and wheat starches, 17–24% synthetic polymer, 13% water, 7% blowing agent(s), and 0.5% nucleating agent. One product made from 28% HP wheat starch, 28% HP amylomaize V starch, 12% ethylene vinyl alcohol (EVOH) copolymer, 8% polystyrene (PS), and 3% polystyrene maleic anhydride (PSMA) copolymer, plus the other raw materials, had a compressibility and resilience that matched those of expanded polystyrene (EPS), although its bulk density was four times higher. The starchy sponge showed 16% shrinkage in volume at 90% relative humidity and was 2% soluble in excess water, both at 25°C. After aging for 18 months near 25°C, the HP starchy sponge gave only a trace of fines in a simulated shipping test, compared to 20% fines from a biodegradable, starch-based, loose-fill sponge of commerce.     

准噶尔盆地西北缘地层水化学特征与油气关系研究

准噶尔盆地西北缘分为超覆尖灭带、断阶带、斜坡区。本文讨论了不同区带地层水化学特征及其与油气运移聚集的关系。研究结果表明 ,高、过成熟阶段烃源岩生成的轻质油气在其运移聚集过程中 ,伴生的CO2 进入地层水中 ,在一定条件下会形成高矿化度NaHCO3 型地层水 ,而以高矿化度NaHCO3 型地层水为底水的油藏 ,原油密度较轻 ,为轻质原油。在近断层处 ,中、高矿化度的MgCl2 、Ns2 SO4 型地层水 ,可作为油气水沿断裂运移的证据。     

Spreadsheet‐Based Design Tool for In Situ Anaerobic Bioremediation Using Soluble Substrate

A Microsoft Excel spreadsheet‐based design tool has been developed to assist remediation professionals in the design of injection systems for distributing soluble substrate (SS) to enhance in situ anaerobic bioremediation. The user provides site data, design parameters, and unit‐cost information to generate estimates of remediation‐system cost and steady‐state contact efficiency (CE_SS) for various designs. CE_SS is estimated from a nonlinear regression equation that includes terms for the SS injection concentration (C_I), minimum substrate concentration (C_MIN), groundwater travel time between rows of injection wells (T_T), SS half‐life (T_H), substrate reinjection time interval (T_R), and pore volumes of substrate solution injected (PV). With this tool, users can quickly compare the relative costs and performance of different injection alternatives and identify the best design for their specific site conditions. The design process embodied in the tool includes: (1) entering injection‐well configuration and unit costs for well installation, injection, and substrate; (2) determining treatment‐zone dimension; (3) selecting trial injection‐well spacing, time period between substrate reinjection, and injection pore volume; and (4) estimating contact efficiency and capital and life‐cycle costs. This process is then repeated until a final design is selected. In most cases, injection costs increase with increasing CE_SS. However, the best (highest) ratio of CE_SS to injection cost typically occurs for CE_SS in the range of 70 to 80 percent. © 2013 Wiley Periodicals, Inc.     

Phenanthrene degradation in soils co-inoculated with phenanthrene-degrading and biosurfactant-producing bacteria

Contaminant sorption within the soil matrix frequently limits biodegradation. However, contaminant bioavailability can be species-specific. This study investigated bioavailability of phenanthrene (PHE) to two PHE-degrading bacteria (Pseudomonas strain R and isolate P5-2) in the presence of rhamnolipid biosurfactant and/or a biosurfactant-producing bacterium, Pseudomonas aeruginosa ATCC 9027. Pseudomonas strain R mineralized more soil-sorbed PHE than strain P5-2, but in aqueous cultures the rate and extent of PHE mineralization by P5-2 exceeded that by P. strain R. In Fallsington sandy loam (fine-loamy, mixed, active, mesic Typic Endoaquult) (high PHE-sorption capacity) the addition of rhamnolipid increased PHE mineralization by P. strain R. Phenanthrene mineralization in soils inoculated with P5-2 was minimal and no enhancement in PHE degradation was observed when biosurfactant was added. Co-inoculation of Fallsington sandy loam with the biosurfactant producer did not affect PHE mineralization by isolate P5-2, but significantly enhanced PHE mineralization by P. strain R. The enhancement of PHE mineralization could not be explained by P. aeruginosa-mediated PHE degradation. The addition of rhamnolipid at concentrations above the critical micelle concentration (CMC) resulted in enhanced PHE release from test soils. These results suggest that the PHE-degrading strains were able to access different pools of PHE and that the biosurfactant-enhanced release of PHE from soils did not result in enhanced biodegradation. The results also demonstrated that bacteria with the catabolic potential to degrade sorbed hydrophobic contaminants could interact commensally with surfactant-producing strains by an unknown mechanism to hasten the biodegradation of aromatic hydrocarbons. Thus, understanding interactions among microbes may provide opportunities to further enhance biodegradation of soil-bound organic contaminants.     

Cell-recycle fed-batch production of a highly unsaturated polyhydroxyalkanoate from 1,3-butanediol byPseudomonas sp. A33

The recently isolatedPseudomonas sp. A33 was investigated for the production of a highly unsaturated polyhydroxyalkanoate (PHA) containing various alkyl and alkenyl pendent groups from 1,3-butanediol in a cell-recycle fed-batch production mode. The monomer composition and degree of unsaturation in PHA were dependent on the environmental conditions. The production temperature markedly influenced the content, composition, and degree of unsaturation of PHA. As the production temperature decreased from 30 to 10°C, the degree of unsaturation and content of PHA were increased, while the mole percentage of 3-hydroxybutyrate (3HB) was decreased. These temperature effects on the composition of PHA imply that the production can be used as a control variable for the biosynthesis of a highly unsaturated PHA and for the specific regulation of the composition of PHA. The biosynthetic pathway for a highly unsaturated PHA which is based on de novo fatty acid biosynthetic pathway is proposed. For the enhanced production of this functional PHA, a high cell density was achieved by cell-recycle continuous culture at 30°C, and then a large amount of PHA was accumulated at 15°C by fed-batch addition of the feeding solution containing excess 1,3-butanediol. The structures of monomer constituents of polymer were confirmed by gas chromatography—mass spectrometric analysis of trimethylsiyl derivatives of 3-hydroxyalkanoic acids methyl esters.     

Anaerobic biotransformation of dinitrotoluene isomers by Lactococcus lactis subsp. lactis strain 27 isolated from earthworm intestine

Dinitrotoluenes are widely used as solvents and are intermediates in the synthesis of dyes, explosives, and pesticides. Environmental concerns regarding DNTs have increased due to their widespread use and their discharge into the environment. In this study, the anaerobic biodegradation of four dinitrotoluene isomers, 2,3-, 2,4-, 2,6- and 3,4-DNT, was investigated using Lactococcus lactis subsp. lactis strain 27, which was isolated from the intestines of earthworms. Liquid chromatography/mass spectrometry and NMR spectroscopy showed that L. lactis strain 27 non-specifically reduced the nitro groups on the tested dinitrotoluenes to their corresponding aminonitrotoluenes. L. lactis strain 27, however, did not reduce either sequentially or simultaneously two nitro groups of the dinitrotoluenes, resulting in the formation of the corresponding diaminotoluenes. In vitro formation of dinitroazoxytoluenes suggested the presence of oxygen-sensitive hydroxylaminonitrotoluenes. L. lactis strain 27 was capable of reducing 2,4-, 2,6-, 2,3-, and 3,4-dinitrotoluenes up to 173.6, 66.6, 287.1, and 355 microM, respectively in 12 h incubation. A relatively rapid reduction was observed in the case of the 2,3-, and 3,4-dinitrotoluenes, which have vicinal nitro groups on their arene structure. Non-specific anaerobic reduction of dinitrotoluenes by the intestinal bacterium L. lactis strain 27 differentiated the extent of reduction of DNTs according to the substitutional position of the nitro groups and produced in vitro more toxic dinitroazoxytoluenes, suggesting that anaerobic biotransformation of dinitrotoluenes could increase environmental risk.     

Echocardiographic diagnosis of fetal marfan syndrome at 34 weeks' gestation

Fetal echocardiography was performed during the third trimester in a normal primigravida. The fetal heart was severely affected with the typical cardiac manifestations of Marfan syndrome. The medical history of the father was investigated and a mild form of the syndrome was diagnosed. The neonate died at 2 months of age of congestive heart failure.