Watershed factors affecting stream acidification in the White Mountains of New Hampshire,USA

The streams tributary to acidic Cone Pond, pH 4.5–4.8, and circumneutral Black Pond, pH 5.3–6.4, in the White Mountains of New Hampshire, USA, were monitored for a year. The watersheds of these two ponds were characterized in terms of geology and stream hydrology. Chemical gradients and patterns in rock weathering and groundwater discharge explain many of the differences in mineral content and acidity of the streams. The rocks of Black watershed produced an average of ten times the equivalent of basic cations as rocks from Cone watershed. This is on the same order as the difference in acidity of the two streams. Down-stream changes in stream chemistry follow differing patterns, but reflect the same principle of residence time and water path length controlling chemical evolution of streamwater. Watershed and aquatic managers may use these parameters in an inexpensive and simple assessment of the susceptibility of individual streams and ponds to acidification. A method is recommended to determine quickly the potential influence of bedrock type to aquatic chemistry.     

Planning for agricultural development in the Himalayan region: An environmental approach

Summary In the present paper efforts have been made to identify an environmentally sustainable and economically gainful strategy for agricultural development in the Himalayan region in Uttar Pradesh State, India. In the underdeveloped rural habitat that exists, a strategy, where the economics of environmentally sustainable development can be studied, is urgently required. The findings have been based on an empirical investigation of 150 sampled households spread over fifteen villages. It was found that the state of Himalayan agriculture and allied activities was in a critical condition, requiring urgent attention in order to improve the human environment. Suggested viable improvements in Himalayan agricultural development may be grouped into four categories, viz., an expansion of the cultivated area, where the land use pattern and other factors are discussed; full utilisation of irrigation potentialities, in which water management is discussed; improvement in the cropping pattern, where the whole system of cropping is analysed; and modifications in the use of agricultural appliances, specially in hoeing, ploughing and inter-culturing implements. Based on a critical analysis of these four identified aspects, economically viable, ecologically sound and socially justified environmental planning may be effectively framed.Dr H.C. Pokhriyal is Head of the Department of Economics at Garhwal University Campus, Tehri, and Dr N.S. Bist is Professor and Head of the Department of Economics at Garhwal University, Srinagar Garhwal, Himalaya, U.P., India.     

BIOECONOMIC CONSIDERATIONS FOR WASTEWATER REUSE IN AGRICULTURAL PRODUCTION1

ABSTRACT: Urban wastewater can be a valuable source of water and plant nutrients for agricultural producers, particularly in arid regions. The scientific literature reveals cautious optimism concerning the biological, institutional, and economic viability of irrigating crops with secondary-treated effluent. A derived effluent demand function for agricultural producers near Tucson, Arizona, reveals a potential annual demand of 11,000 acre-feet under present price and proposed delivery system conditions. In this case, wastewater could be exchanged for ground water and both the urban and rural areas would gain.     

AN APPLICATION OF INVESTMENT TIMING ANALYSIS: DUAL WATER SYSTEMS1

ABSTRACT: A general methodology to study the economics of dual water systems (defined here as a separate distribution system for untreated low quality local surface Water for outdoor municipal water supply) is summarized and the application of the method to a rapidly growing city is presented. In the first step, a cost-benefit criterion for evaluating dual systems is developed. The criterion is then extended to a dynamic case where the population to be served increases with time and where the dual system is allowed to expand. The optimal investment time to introduce the dual water supply project is obtained by maximizing social welfare. The model is applied to the city of West Jordan, Utah, where a dual system is currently being proposed. Model results indicate that for the city as a whole dual supply is not economically feasible. However, when the model is applied to a part of the city, it is found feasible and the optimal time to initiate the project would be in the year 1989.     

Methods and impact of health screening for hospital staff

This study examines: (1) the impact of two methods of giving screening results on health behaviour and beliefs, evaluated in a randomized controlled trial. (2) The association between uptake of screening and health risk behaviours and beliefs. Two methods of feedback of screening results were given: simple informational feedback, and more extensive feedback, including target-setting and a written contract. At six month follow-up, those who received simple informational feedback had lost less weight and had increased their exercise less than those who received more extensive feedback. Attenders believed more strongly in the relationship between lifestyle and health, perceived themselves as less healthy than others and scored higher on the GHQ than staff who did not attend for screening. These results suggest that belief in the effectiveness of lifestyle change in promoting health, and anxiety about health, can influence uptake of screening. Second, the method of presenting screening results can influence the impact of screening on subsequent behaviour change.     

Theoretic model for the computer analysis of vehicle collisions

The complexity of the study and reconstruction of traffic accidents justifies the creation of tools which make easier the research in this area. That is the reason why the GIVET has developed a program called SINRAT III that lets, by means of dynamic simulation, reproduce the evolution of two vehicles in an accident in which a collision takes place, letting analyze the precollision and postcollision movements, as well as studying what happens during the contact and deformation of the vehicles in the collision stage. The simulation model is integrated by bodies developed using the bond-graph technique, that allows the simulation of the dynamic behaviour of the vehicles in any circumstance. At the end of this paper, an application example is presented, corresponding to an accident with collision between car and coach.     

A hierarchical approach to fisheries planning and modeling in the Columbia River Basin

The Columbia River Basin is the scene of a massive effort to restore populations of Pacific salmon (Oncorhynchus spp.) and steelhead (O. mykiss). Efficient restoration is confounded by a high level of complexity, competing sociopolitical goals and values, and uncertainty about key system properties. Simulation models and other tools of systems analysis are important to development of a comprehensive, regionally acceptable strategy. Hierarchy theory provides a useful paradigm for organized complexity within the Columbia Basin and the basis for a trilevel hierarchical structure for organizing and integrating models. Life-stage models compose the most basic simulation units at the lowest level in the proposed hierarchical modeling structure. Each life-stage model simulates a distinct period in the life cycle of anadromous salmonids. Population models at the intermediate level simulate the complete life cycles of salmon and steelhead populations. At the highest level in the hierarchy, interpopulation models simulate extensive, long-term processes that affect multiple species and stocks. A hierarchical system of models is preferable to a single model or to a group of models lacking formal structure. A principal advantage is that models have the correct spatial and temporal resolution for analyzing questions at different scales. A hierarchical structure also facilitates the flow of information among models, and aids in understanding the impacts of uncertainty. Constructing a hierarchy of models should involve both bottom-up and top-down perspectives that maintain logical consistency among models, while allowing unique model structures appropriate for each level in the hierarchy.     

An approach for analysing the potential for material efficiency improvement

Material efficiency improvement saves energy and reduces the consumption of primary resources and reduces the volume of waste. In this article an approach for analysing the potential for material efficiency improvement is proposed and discussed. In this approach the product functions performed by the materials and various improvement measures are taken into account. The potential for material saving and associated energy saving is assessed and evaluated economically. In this paper the approach is tested in an analysis of the potential for material efficiency improvement with respect to plastic packaging in the Netherlands. The technical reduction potential is found to be 34 ± 7% (157 ± 30 ktonne virgin plastics). Realization of this potential would improve the energy efficiency of the lifecycle of plastic packaging by 31% (10 PJ in 1988). From our study we conclude that our approach can indeed be used to investigate the potential for material efficiency improvement. However, a reliable technical and particularly an economical assessment of reduction measures cannot be made until more detailed data become available.     

Metals recycling in the United States

Twenty-two metals for which secondary recovery is important, in terms of quantity and/or value, were compared and ranked for rate and efficiency of recycling, and availability of recycled metal. In general, their recycling rates trended upward over the period 1970–1993. Iron, aluminum, copper, gold, platinum, and lead accounted for most of the value of all secondary metal produced, while iron and steel dominated in terms of quantity produced and exported. The factors most influential on recycling rates are profitability, public support, organization of infrastructure, sortability, legislative support, and scrap purity. The share of supply accounted for by secondary metals is expected to surpass that of primary metals sometime in the next decade.