Direct measurement of fugitive emissions of hydrocarbons from a refinery

Refineries are a source of emissions of volatile hydrocarbons that contribute to the formation of smog and ozone. Fugitive emissions of hydrocarbons are difficult to measure and quantify. Currently these emissions are estimated based on standard emission factors for the type and use of equipment installed. Differential absorption light detection and ranging (DIAL) can remotely measure concentration profiles of hydrocarbons in the atmosphere up to several hundred meters from the instrument. When combined with wind speed and direction, downwind vertical DIAL scans can be used to calculate mass fluxes of the measured gas leaving the site. Using a mobile DIAL unit, a survey was completed at a Canadian refinery to quantify fugitive emissions of methane, C2+ hydrocarbons, and benzene and to apportion the hydrocarbon emissions to the various areas of the refinery. Refinery fugitive emissions as measured with DIAL during this demonstration study were 1240 kg/hr of C2+ hydrocarbons, 300 kg/hr of methane, and 5 kg/hr of benzene. Storage tanks accounted for over 50% of the total emissions of C2+ hydrocarbons and benzene. The coker area and cooling towers were also significant sources. The C2+ hydrocarbons emissions measured during the demonstration amounted to 0.17% of the mass of the refinery hydrocarbon throughput for that period. If the same loss were repeated throughout the year, the lost product would represent a value of US$3.1 million/yr (assuming US$40/bbl). The DIAL-measured hourly emissions of C2+ hydrocarbons were 15 times higher than the emission factor estimates and gave a different perspective on which areas of the refinery were the main source of emissions. Methods, such as DIAL, that can directly measure fugitive emissions would improve the effectiveness of efforts to reduce emissions, quantify the reduction in emissions, and improve the accuracy of emissions data that are reported to regulators and the public.     

Determination of veterinary pharmaceuticals in poultry litter and soil by methanol extraction and liquid chromatography-tandem mass spectrometry

Pharmaceuticals are emerging contaminants with potential risks to the environment and human health. A liquid chromatography-tandem mass spectrometry (LC-MS-MS) method was developed for determination of the antimicrobials virginiamycin, monensin, salinomycin, narasin and nicarbazin in poultry litter and soil. This method involves methanol extraction and clean-up of extracts through glass microfibre filters, introduction of the extracts and separation of compounds on a Zorbax Eclipse XDB C8 column, and compound detection in a Quattro Micro Micromass spectrometer. For litter samples, Method Detection Limits ranged from 0.1–0.6 μg Kg^{? 1}, while Limits of Quantitation (LOQs) were 2, 1, 0.4, 1 and 2 μg Kg^{? 1} for virginiamycin, monensin, salinomycin, narasin and nicarbazin, respectively. For soil samples calculated LOQs were 2, 3, 1, 1, and 1 μg Kg^{? 1} for virginiamycin, monensin, salinomycin, narasin and nicarbazin, respectively. Application of the LC-MS-MS method for detection of veterinary pharmaceuticals in litter collected from commercial poultry farms showed that compounds were present at concentrations ranging from 10–11,000 μg Kg^{? 1}.     

Seasonal variability of radon-derived fetch regions for Sado Island,Japan, based on 3 years of observations: 2002–2004

Three years of hourly atmospheric radon measurements at Sado Island (Japan) are discussed and compared with corresponding measurements at Gosan (South Korea), and Hok Tsui (China). In conjunction with back trajectory analysis, Sado radon data are used to characterise the seasonal variability in fetch regions of air masses subject to extremes of terrestrial influence. In winter, fetch regions of air masses that have experienced the greatest terrestrial influence covered southern Siberia; in summer, the terrestrial fetch was dominated by Japan; throughout the remaining months the terrestrial fetch encompassed the Korean Peninsula and far eastern China. Summer radon data are then used to estimate the radon flux from central Honshu (23.5 mBq m^?2 s^?1), which varied regionally between 10.6 and 47.9 mBq m^?2 s^?1. The Sado radon record reported here completes a 4-site, multi-year dataset of hourly radon concentrations across East Asia and the central Pacific (spanning 16° of latitude), which constitutes a unique evaluation tool for transport and mixing schemes of atmospheric and chemical transport models.     

Impact of cigarette smoking on volatile organic compound (VOC) blood levels in the U.S. population: NHANES 2003-2004

The impact of cigarette smoking on volatile organic compound (VOC) blood levels is studied using 2003-2004 National Health and Nutrition Examination Survey (NHANES) data. Cigarette smoke exposure is shown to be a predominant source of benzene, toluene, ethylbenzene, xylenes and styrene (BTEXS) measured in blood as determined by (1) differences in central tendency and interquartile VOC blood levels between daily smokers [≥1 cigarette per day (CPD)] and less-than-daily smokers, (2) correlation among BTEXS and the 2,5-dimethylfuran (2,5-DMF) smoking biomarker in the blood of daily smokers, and (3) regression modeling of BTEXS blood levels versus categorized CPD. Smoking status was determined by 2,5-DMF blood level using a cutpoint of 0.014 ng/ml estimated by regression modeling of the weighted data and confirmed with receiver operator curve (ROC) analysis. The BTEXS blood levels among daily smokers were moderately-to-strongly correlated with 2,5-DMF blood levels (correlation coefficient, r, ranging from 0.46 to 0.92). Linear regression of the geometric mean BTEXS blood levels versus categorized CPD showed clear dose-response relationship (correlation of determination, R(2), ranging from 0.81 to 0.98). Furthermore, the pattern of VOCs in blood of smokers is similar to that reported in mainstream cigarette smoke. These results show that cigarette smoking is a primary source of benzene, toluene and styrene and an important source of ethylbenzene and xylene exposure for the U.S. population, as well as the necessity of determining smoking status and factors affecting dose (e.g., CPD, time since last cigarette) in assessments involving BTEXS exposure.     

Cadmium availability to wheat grain in soils treated with sewage sludge or metal salts

Grain Cd concentrations were determined in wheat (Triticum aestivum L.) grown in 1999, 2001 and 2003, at six sludge cake field experiments. Three of these sites also had comparisons with Cd availability from metal amended liquid sludge and metal salts. Grain Cd concentrations in all years and at all sites were significantly linearly correlated with NH4NO3 extractable Cd and soil total Cd (P<0.001). Soil extractability was greater in the liquid sludge and metal salt experiments than in the cake experiments, as were grain Cd concentrations. Across all the sites, NH4NO3 extractable soil Cd was no better at predicting grain Cd than soil total Cd. Stepwise multiple linear regression analysis showed that soil total Cd, pH and organic carbon were the only significant (P<0.001) variables influencing wheat grain Cd concentrations, explaining 78% of the variance across all field experiments (1408 plots). This regression predicted that the current UK soil total Cd limit of 3 mg kg(-1) was not sufficiently protective against producing grain above the European Union (EU) grain Cd Maximum Permissible Concentration (MPC) of 0.235 mg Cd kg(-1) dry weight, unless the soil pH was > 6.8. Our predictions show that grain would be below the MPC with > 95% confidence with the proposed new EU draft regulations permitting maximum total Cd concentrations in soils receiving sludge of 0.5 mg kg(-1) for soils of pH 5-6, 1 mg kg(-1) for soils of pH 6-7, and 1.5 mg kg(-1) for soils of pH > or = 7.     

Composting duck excreta enriched wood shavings: C and N transformations and bacterial pathogen reductions

Composting of agricultural and domestic wastes is used increasingly to reduce weight, volume, and odor; destroy animal and plant pathogens; and improve the quality of end-products to be used as soil amendments and growth substrates. The objective of this study was to investigate the transformation of C and N and the survival of bacterial populations and pathogenic bacteria during in-vessel composting of duck excreta enriched wood shavings. Two feedstocks, collected on different dates, were composted (C1 and C2) in an enclosed hall system equipped with an electromechanical turner. Temperature was continuously recorded, whereas moisture content and bacterial counts were determined twice a week. Data showed that, although the N content of C2 was only half of that of C1, both materials were fully biostabilized at the end of the composting period as indicated by extractable lipid ratios. In the compost with the low C/N ratio (C1), all bacterial populations were eliminated, whereas fecal streptococci, total coliforms, and gram-negative bacteria were still present in C2 at the end of the composting period. Our results emphasize that the composting of manures and other organic wastes needs to be properly managed to stabilize C and N and to eliminate or reduce bacterial populations.