Validation of the operational emergency response model at the Swedish Meteorological and Hydrological Institute using data from etex and the chernobyl accident

The Eulerian atmospheric tracer transport model MATCH (Multiscale Atmospheric Transport and Chemistry model) has been extended with a Lagrangian particle model treating the initial dispersion of pollutants from point sources. The model has been implemented at the Swedish Meteorological and Hydrological Institute in an emergency response system for nuclear accidents and can be activated on short notice to provide forecast concentration and deposition fields.The model has been used to simulate the transport of the inert tracer released during the ETEX experiment and the transport and deposition of ¹³⁷Cs from the Chernobyl accident. Visual inspection of the results as well as statistical analysis shows that the extent, time of arrival and duration of the tracer cloud, is in good agreement with the observations for both cases, with a tendency towards over-prediction for the first ETEX release. For the Chernobyl case the simulated deposition pattern over Scandinavia and over Europe as a whole agrees with observations when observed precipitation is used in the simulation. When model calculated precipitation is used, the quality of the simulation is reduced significantly and the model fails to predict major features of the observed deposition field.     

Principles of microbial PAH-degradation in soil

Interest in the biodegradation mechanisms and environmental fate of polycyclic aromatic hydrocarbons (PAHs) is motivated by their ubiquitous distribution, their low bioavailability and high persistence in soil, and their potentially deleterious effect on human health. Due to high hydrophobicity and solid-water distribution ratios, PAHs tend to interact with non-aqueous phases and soil organic matter and, as a consequence, become potentially unavailable for microbial degradation since bacteria are known to degrade chemicals only when they are dissolved in water. As the aqueous solubility of PAHs decreases almost logarithmically with increasing molecular mass, high-molecular weight PAHs ranging in size from five to seven rings are of special environmental concern. Whereas several reviews have focussed on metabolic and ecological aspects of PAH degradation, this review discusses the microbial PAH-degradation with special emphasis on both biological and physico-chemical factors influencing the biodegradation of poorly available PAHs.     

In-field measurements of PCDD/F emissions from domestic heating appliances for solid fuels

Within this project the emissions into the atmosphere of polychlorinated dibenzo-p-dioxins and -furans (PCDD/F) of 30 domestic heating appliances in Austrian households were tested. The appliances were single stoves (kitchen stove, continuous burning stove and tiled stove) and central heating boilers for solid fuels up to a nominal heat input of 50 kW. A main objective of this survey was to determine the PCDD/F emissions of domestic heating units under routine conditions. Therefore, the habitual combustion conditions used by the operators were not influenced. The original fuels and lightning supports were used and the operation of the units was carried out by the householders according to their usual practice. The data obtained were used to calculate in-field PCDD/F-emission factors. Most of the appliances have shown PCDD/F emissions within a concentration range of 0.01-0.3 ng TEQ/MJ. Modern fan-assisted wood heating boilers with afterburning and units for continuously burning of wood chips and wood pellets had the lowest emissions. High emissions were caused by unsuitable heating habits such as combustion of wastes and inappropriate operation of the appliances. There were only small differences between single stoves and central heating boilers or between wood and coal-fired appliances. The emission factors calculated are higher than those cited in literature, which are mainly derived from trials on test stands under laboratory conditions.     

Assessing in situ mineralization of recalcitrant organic compounds in vadose zone sediments using delta13C and 14C measurements

Few techniques exist to measure the biodegradation of recalcitrant organic compounds such as chlorinated hydrocarbons (CHC) in situ, yet predictions of biodegradation rates are needed for assessing monitored natural attenuation. Traditional techniques measuring O2, CO2, or chemical concentrations (in situ respiration, metabolite and soil air monitoring) may not be sufficiently sensitive to estimate biodegradation rates for these compounds. This study combined isotopic measurements (14C and delta13C of CO2 and delta13C of CHCs) in conjunction with traditional methods to assess in situ biodegradation of perchloroethylene (PCE) and its metabolites in PCE-contaminated vadose zone sediments. CHC, ethene, ethane, methane, O2, and CO2 concentrations were measured over 56 days using gas chromatography (GC). delta13C of PCE, trichloroethylene (TCE) and cis-1,2-dichloroethylene (DCE), delta13C and 14C of vadose zone CO2 and sediment organic matter, and delta13C, 14C, and deltaD of methane were measured using a GC-isotope ratio mass spectrometer or accelerator mass spectrometer. PCE metabolites accounted for 0.2% to 18% of CHC concentration suggesting limited reductive dechlorination. Metabolites TCE and DCE were significantly enriched in (13)C with respect to PCE indicating metabolite biodegradation. Average delta13C-CO2 in source area wells (-23.5 per thousand) was significantly lower compared to background wells (-18.4 per thousand) indicating CHC mineralization. Calculated CHC mineralization rates were 0.003 to 0.01 mg DCE/kg soil/day based on lower 14C values of CO2 in the contaminated wells (63% to 107% modern carbon (pMC)) relative to the control well (117 pMC). Approximately 74% of the methane was calculated to be derived from in situ CHC biodegradation based on the 14C measurement of methane (29 pMC). 14C-CO2 analyses was a sensitive measurement for quantifying in situ recalcitrant organic compound mineralization in vadose zone sediments for which limited methodological tools exist.     

Oil spill in the Rio de la Plata estuary, Argentina: 2-hydrocarbon disappearance rates in sediments and soils

The 6-month assessment of the oil spill impact in the Rio de la Plata described in the preceding paper [Colombo, J.C., Barreda, A., Bilos, C., Cappelletti, N., Demichelis, S., Lombardi, P., Migoya, M.C., Skorupka, C., Suarez, G., 2004. Oil spill in the Rio de la Plata estuary, Argentina: 1 - biogeochemical assessment of waters, sediments, soils and biota. Environmental Pollution] was followed by a 13- and 42-month campaigns to evaluate the progress of hydrocarbon decay. Average sediment hydrocarbon concentrations in each sampling include high variability (85-260%) due to contrasting site conditions, but reflect a significant overall decrease after 3 years of the spill: 17 +/- 27, 18 +/- 39 to 0.54 +/- 1.4 microg g(-1) for aliphatics; 0.44 +/- 0.49, 0.99 +/- 1.6 to 0.04 +/- 0.03 microg g(-1) for aromatics at 6, 13 and 42 months, respectively. Average soil hydrocarbon levels are 100-1000 times higher and less variable (61-169%) than sediment values, but display a clear attenuation: 3678 +/- 2369, 1880 +/- 1141 to 6.0 +/- 10 microg g(-1) for aliphatics and 38 +/- 26, 49 +/- 32 to 0.06 +/- 0.04 microg g(-1) for aromatics. Hydrocarbon concentrations modeled to first-order rate equations yield average rate constants of total loss (biotic+abiotic) twice as higher in soils (k = 0.18-0.19 month(-1)) relative to sediments (0.08-0.10 month(-1)). Individual aliphatic rate constants decrease with increasing molecular weight from 0.21 +/- 0.07 month(-1) for isoprenoids and n-C27, similar to hopanes (0.10 +/- 0.05 month(-1)). Aromatics disappearance rates were more homogeneous with higher values for methylated relative to unsubstituted species (0.17 +/- 0.05 vs. 0.12 +/- 0.05 months(-1)). Continued hydrocarbon inputs, either from biogenic (algal n-C15,17; vascular plant n-C27,29) or combustion related sources (fluoranthene and pyrene), appear to contribute to reduced disappearance rate. According to the different loss rates, hydrocarbons showed clear compositional changes from 6-13 to 42 months. Aliphatics disappearance rates and compositional changes support an essentially microbiologically-mediated recovery of coastal sediments to pre-spill conditions in a 3-4 year period. The lower rates and more subtle compositional changes deduced for aromatic components, suggest a stronger incidence of physical removal processes.     

Bioaccumulation of PCBs in Arctic seabirds: influence of dietary exposure and congener biotransformation

Four seabird species and their prey (zooplankton or fish) were collected in the Barents Sea to determine how dietary exposure, cytochrome P450 (CYP) enzyme activities and sex influenced their hepatic PCB concentrations and accumulation patterns. Five males and five females from each seabird species (little auk (Alle alle), Brunnich's guillemot (Uria lomvia), black guillemot (Cepphus grylle) and black-legged kittiwake (Rissa tridactyla)) were analysed. PCB concentrations could not be explained directly by carbon source (delta13C) or trophic position (delta15N), but by a combination of dietary parameters (delta13C, delta15N, migratory pattern, age) and contaminant metabolism. Contrary to previous studies, the PCB pattern differed among seabirds, with a higher proportion of persistent congeners (% of PCB-153, RPCB-153) in black-legged kittiwake than in auks. The PCB pattern also differed among auks, with little auk as the most efficient biotransformer (highest RPCB-153 values of persistent congeners). Based on high RPCB-153 values, Brunnich's guillemot poorly metabolised ortho-meta-unsubstituted congeners, whereas black guillemot poorly metabolised meta-para unsubstituted congeners. Species-specific differences in PCB biotransformation were confirmed by metabolic indices, where PCB patterns in seabirds were adjusted for PCB pattern in prey. The relative contribution of ortho-meta-unsubstituted congeners to SigmaPCBs decreased with increasing EROD activity. There were no differences in PCB concentrations, PCB patterns or cytochrome P450 enzyme activities between males and females. CYP P450 activities (CYP1A- and CYP2B/3A-like: EROD and testosterone 6beta-hydroxylation, respectively) were low and did not correlate with concentrations of non- or mono-ortho Cl-substituted PCBs (NO- and MO-PCBs), or with total toxic equivalent concentrations (TEQs) for dioxin-like effects of NO- and MO-PCBs.     

Concentrations and distribution of 3,3'-dichlorobenzidine and its congeners in environmental samples from Lake Macatawa

Release of 3,3'-dichlorobenzidine (DCB), an intermediate in dye manufacturing processes, is of environmental concern due to its carcinogenic nature. An 11-year field study has been conducted to elucidate the fate and behavior of DCB and its congeners in the Lake Macatawa (Holland, MI, USA) sediment-water system. The sediments were variable in composition, ranging from sandy sediments with 1-8.7% total organic carbon (OC) to silty-clay sediments with 7.5-20.6% total OC. The pH ranged from 6.3 to 7.4. The findings from this field study confirmed that DCB and its congener, benzidine, are transported over long distances. The concentration of DCB in the water phase was found to be from non-detectable to approximately 1300 times greater than the water quality criteria established for DCB (0.021 microg/l). Its congener, benzidine, which is substantially more toxic for humans than its parent compound has been found up to approximately 12300 times higher levels than the EPA guidelines suggest (0.000086 microg/l). Both DCB and benzidine were found in the sediment phase. DCB was observed at almost 70 mg/kg in a sample collected in 1993. The concentrations in both phases have declined in recent years. To assess the threat of the released pollutants, it is necessary to understand how pollutants tend to behave in various media. Therefore, it is crucial to identify and quantify all sources of the chemical and its congeners in order to meaningfully predict the fate (and transport) of a hydrophobic organic compound (HOC) in the environment.     

Distribution of organotin compounds in tissues of mussels Mytilus edulis and clams Mya arenaria

Concentrations and composition of butyltin (BT) and phenyltin (PT) compounds were compared in tissues of mussels Mytilus edulis and clams Mya arenaria collected from the Mersey Estuary. Tributyltin (TBT) concentrations were consistently highest in digestive gland and low in muscular tissues such as siphons (Mya) and adductor muscle (Mytilus). Lowest concentrations were found in the periostracum surrounding the siphons of Mya. Ratios of monobutyltin (MBT), dibutyltin (DBT) and TBT to total BT content of Mytilus tissues were in the ranges 25-34%, 21-28% and 44-51%, respectively. Much higher proportions of TBT:total BT were characteristic of Mya (>80% in the digestive gland, remaining tissue and gonad) implying that slow degradation rates account for the relatively high levels of TBT in this species. TPT was the only phenyltin compound detected (albeit at relatively low levels), and, like TBT, was present in highest concentrations in the digestive gland of clams--suggesting an important dietary component in the accumulation of OTs in these bivalves.     

Monitoring of polychlorinated biphenyls in Belgian human adipose tissue samples

Polychlorinated biphenyls (PCBs) were monitored in Belgian human adipose tissue samples from deceased individuals (n=100). Their mean age was 52, ranging from 2 to 91 years. There were 57 men and 43 women. Other known variables were date of autopsy and place of residence. No information about diet or occupation was available. The seven marker congeners PCB 28, 52, 101, 118, 138, 153 and 180 were analysed in the samples with a GC-MS/MS method validated according to Commission Decision 2002/657/EC. Extracted fat was cleaned-up over a glass column filled with n-hexane, acid silica, deactivated alumina and anhydrous sodium sulfate. The whole procedure was subjected to a rigorous quality control programme with retention times, ion chromatograms and intensity ratios of the monitored product ions as identification criteria. The total PCB concentration ranged between 10 and 1640 ng g-1 fat, with a mean value of 658 ng g-1 fat. In the age groups of 0-9 (n=1), 10-19 (n=4), 20-29 (n=11), 30-39 (n=13), 40-49 (n=15), 50-59 (n=14), 60-69 (n=14), 70-79 (n=20), 80-89 (n=6) and 90-99 (n=2), the mean total PCB concentrations were 10, 134, 253, 445, 557, 687, 807, 962, 959, and 1191 ng g-1 fat, respectively. So, there was an increase of PCB body burden with age. For the male subjects (n=57; mean age of 53) the mean total PCB concentration was 633 ng g-1 fat. For the female subjects (n=43; mean age of 52) it was 690 ng g-1 fat. There was no significant sex-related difference in the concentrations of marker PCBs.     

Two-dimensional laboratory simulation of LNAPL infiltration and redistribution in the vadose zone

A quantitative two-dimensional laboratory experiment was conducted to investigate the immiscible flow of a light non-aqueous phase liquid (LNAPL) in the vadose zone. An image analysis technique was used to determine the two-dimensional saturation distribution of LNAPL, water and air during LNAPL infiltration and redistribution. Vertical water saturation variations were also continuously monitored with miniature resistivity probes. LNAPL and water pressures were measured using hydrophobic and hydrophilic tensiometers. This study is limited to homogeneous geological conditions, but the unique experimental methods developed will be used to examine more complex systems. The pressure measurements and the quantification of the saturation distribution of all the fluids in the entire flow domain under transient conditions provide quantitative data essential for testing the predictive capability of numerical models. The data are used to examine the adequacy of the constitutive pressure-saturation relations that are used in multiphase flow models. The results indicate that refinement of these commonly used hydraulic relations is needed for accurate model prediction. It is noted in particular that, in three-fluid phase systems, models should account for the existence of a residual NAPL saturation occurring after NAPL drainage. This is of notable importance because residual NAPL can act as a non negligible persistent source of contamination.