Enrichment and isolation of endosulfan-degrading microorganisms

Endosulfan (6,7,8,9,10,10-hexachloro-1,5,5a,6,9,9a-hexahydro-6,9-methano-2,3,4-benzo-dioxathiepin-3-oxide) is a cyclodiene organochlorine currently used as an insecticide all over the world and its residues are posing a serious environmental threat. This study reports the isolation and identification of enriched microorganisms, capable of degrading endosulfan. Enrichment was achieved by using the insecticide as either the sole source of carbon or sulfur in parallel studies. Two strains each of fungi (F1 and F4) and bacteria (BF2 and B4) were selected using endosulfan as a sole carbon source. A Pandoraea species (Lin-3) previously isolated in our laboratory using lindane (gamma-HCH) as a carbon source was also screened for endosulfan degradation. F1 and F4 (Fusarium ventricosum) degraded alpha-endosulfan by as much as 82.2 and 91.1% and beta-endosulfan by 78.5 and 89.9%, respectively, within 15 d of incubation. Bacterial strains B4 and Lin-3 degraded alpha-endosulfan up to 79.6 and 81.8% and beta-endosulfan up to 83.9 and 86.8%, respectively, in 15 d. Among the bacterial strains isolated by providing endosulfan as a sulfur source, B4s and F4t degraded alpha-endosulfan by as much as 70.4 and 68.5% and beta-endosulfan by 70.4 and 70.8%, respectively, after 15 d. Degradation of the insecticide occurred concomitant with bacterial growth reaching an optical density (OD600) of 0.366 and 0.322 for B4 and Lin-3, respectively. High OD600 was also noted with the other bacterial strains utilizing endosulfan as a sulfur source. Fungal and bacterial strains significantly decreased the pH of the nutrient culture media while growing on endosulfan. The results of this study suggest that these novel strains are a valuable source of potent endosulfan-degrading enzymes for use in enzymatic bioremediation.     

Chromate reduction by chromium-resistant bacteria isolated from soils contaminated with dichromate

Extensive use of hexavalent chromium [Cr(VI)] in various industrial applications has caused substantial environmental contamination. Chromium-resistant bacteria isolated from soils can be used to remove toxic Cr(VI) from contaminated environments. This study was conducted to isolate chromium-resistant bacteria from soils contaminated with dichromate and describes the effects of some environmental factors such as pH, temperature, and time on Cr(VI) reduction and resistance. We found that chromium-resistant bacteria can tolerate 2500 mg L(-1) Cr(VI), but most of the isolates tolerated and reduced Cr(VI) at concentrations lower than 1500 mg L(-1). Chromate reduction activity of whole cells was detected in five isolates. Most of these isolates belong to the genus Bacillus as identified by the 16S rRNA gene sequencing. Maximal Cr(VI) reduction was observed at the optimum pH (7.0-9.0) and temperature (30 degrees C) of growth. One bacterial isolate (Bacillus sp. ES 29) was able to aerobically reduce 90% of Cr(VI) in six hours. The Cr(VI) reduction activity of the whole cells of five isolates had a K(M) of 0.271 (2.61 mM) to 1.51 mg L(-1) (14.50 mM) and a V(max) of 88.4 (14.17 nmol min(-1)) to 489 mg L9-1) h(-1) (78.36 nmol min(-1)). Our consortia and monocultures of these isolates can be useful for Cr(VI) detoxification at low and high concentrations in Cr(VI)-contaminated environments and under a wide range of environmental conditions.     

Atmospheric ammonia,volatile fatty acids,and other odorants near beef feedlots

Intensive livestock operations can release odorous gases from stored or land-applied manure. We measured concentrations of dust and 14 odor-causing gases at increasing distances from four feedlots near Lethbridge, southern Alberta, Canada. Concentration was determined from the amount of total dust or gas accumulated in the sampIers, and the volume of air sampled. Adjacent the feedlots, the maximum concentration of many volatile fatty acids exceeded reported odor detection thresholds; the maximum ammonia concentration was close to the threshold. Ammonia and butyric acid approached or exceeded their individual odor thresholds as far as 200 m downwind of the feedlots. Highest concentrations were measured adjacent to land where manure was being applied. None of the odorant concentrations exceeded their irritation threshold. There was a positive relationship between ammonia concentration and odor intensity as well as dry deposition. Much of the emitted ammonia was deposited to soil immediately downwind, enough to supply all the nitrogen needed for crop growth. Odorant concentrations declined sharply with distance, though measurable odor occasionally persisted to 1 km from the feedlot, beyond the minimum separation guidelines (Alberta) for a single residential dwelling. The weekly averaged total suspended particulates (> 5 microm) were below the Alberta guideline criterion except for one period. Differences among feedlots in odorant plume concentrations were partly related to the stocking density of feedlots, which presumably affects manure moisture and amount of volatiles within the pens.     

Properties of several fly ash materials in relation to use as soil amendments

Fly ash samples from five power stations in Western Australia and Queensland, and two soils used for horticulture in Western Australia, were evaluated for a series of physical and chemical properties. Soils were comprised primarily of coarse sand-sized particles, whereas most of the fly ashes were primarily fine sand- and silt-sized particles. Hydraulic conductivities in the fly ashes were 105- to 248-fold slower than in the soils. The water-holding capacities of fly ashes at "field capacity" were three times higher than those of the soils. Extractable P in the fly ashes (except Tarong and Callide) were 20- to 88-fold higher than in the soils. The pH showed considerable variation among the different sources of fly ash, with samples from Muja being the most acidic (pH = 3.8; 1:5 in CaCl2 extract) and from Gladstone the most alkaline (pH = 9.9). The toxicity characteristic leaching procedure (TCLP) values indicate that the potential for release of trace elements from the fly ashes was well below regulatory levels. When applied at sufficient rates (e.g., to achieve 10% w/w in surface layers) to sandy soils, fly ash altered texture and increased water-holding capacity. Depending on the source of fly ash used, such amendments could also provide P and aid nutrient retention by increasing the phosphorus retention index (PRI) and/or cation exchange capacity (CEC). The considerable variability in physical and chemical properties among the fly ash samples evaluated in the present study supports the notion that field trials are essential to the future development of soil amendment strategies making use of any particular source of fly ash.     

Chemical extraction methods to assess bioavailable arsenic in soil and solid media

Soil ingestion by children is an important pathway in assessing public health risks associated with exposure to arsenic-contaminated soils. Soil chemical methods are available to extract various pools of soil arsenic, but their ability to measure bioavailable arsenic from soil ingestion is unknown. Arsenic extracted by five commonly used soil extractants was compared with bioavailable arsenic measured in vivo by immature swine (Sus scrofa) dosing trials. Fifteen contaminated soils that contained 233 to 17 500 mg kg(-1) arsenic were studied. Soil extractants were selected to dissolve surficially adsorbed and/or readily soluble arsenic (water, 1 M sodium acetate, 0.1 M Na2HPO4/0.1 M NaH2PO4) and arsenic in Fe and Mn oxide minerals (hydroxylamine hydrochloride, ammonium oxalate). The mean percent of total arsenic extracted was: ammonium oxalate (53.6%) > or = hydroxylamine hydrochloride (51.7%) > phosphate (10.5%), acetate (7.16%) > water (0.15%). The strongest relationship between arsenic determined by soil chemical extraction and in vivo bioavailable arsenic was found for hydroxylamine hydrochloride extractant (r = 0.88, significant at the 0.01 probability level). Comparison of the amount of arsenic extracted by soil methods with bioavailable arsenic showed the following trend: ammonium oxalate, hydroxylamine hydrochloride > in vivo > phosphate, acetate > water. The amount of arsenic dissolved in the stomach (potentially bioavailable) is between surficially adsorbed (extracted by phosphate or acetate) and surficially adsorbed + nonsurficial forms in Fe and Mn oxides (extracted by hydroxylamine hydrochloride or ammonium oxalate). Soil extraction methods that dissolve some of the amorphous Fe, such as hydroxylamine hydrochloride, can be designed to provide closer estimates of bioavailable arsenic.     

Comparison of Four <Emphasis Type="Italic">Sesbania</Emphasis> Species to Remediate Pb/Zn and Cu Mine Tailings

A 6-month greenhouse pot trial was performed, aimed at screening appropriate Sesbania species for remediation of Pb/Zn and Cu mine tailings. Performances of young seedlings of four Sesbania species (S. cannabina, S. grandiflora, S. rostrata, and S. sesban) were compared with and without inoculation of rhizobia. Seedlings were planted in two types of tailings amended with garden soil or garden soil mixed with river sediment. The results indicated that inoculated plants generally produced a higher biomass than samples without inoculation. Pb/Zn mine tailings containing rather high concentrations of total and water-soluble Cu, Pb, and Zn were toxic to plant growth compared with Cu mine tailings, according to the growth performance of the four species. Sesbania sesban and S. rostrata showed superior growth performance, compared to the other two species. Thus, they can serve as pioneer species to modify the barren environment, by providing organic matter and essential nutrients such as nitrogen, upon decomposition, in a relatively short period of time. This is especially true for S. rostrata, which is an annual plant that forms both stem and root nodules. However, a longer-term field trial should be conducted to investigate if superior species can beneficially modify the habitat for the growth of subsequent plant communities.     

Impact of busy roads on breeding success in pied flycatchers Ficedula hypoleuca

The impact of dense traffic on the breeding success in pied flycatchers (Ficedula hypoleuca) was studied using roadside nest-boxes. Nest site selection and breeding success of flycatchers were observed in relation to the distance from the road. The number of occupied territories was no higher closer to the road than it was deeper inside the forest. The distance to the road had no effect on the laying date, clutch size, or brood size. However, nests closer to the road were more likely to fail at the chick stage. The number of broods that were closer to roads and were lost completely was significantly higher than those further away. As a consequence, the number of fledglings per breeding attempt decreased closer to roads. The nestlings typically died as older chicks when the parent birds were providing them with maximum quantities of food. A possible reason for the declining reproductive success was the traffic-related mortality of parent birds, as weather conditions were not especially adverse for raising healthy offspring.     

The role of grazing by the lysianassid amphipod<Emphasis Type="Italic"> Orchomenella aahu</Emphasis> in dieback of the kelp<Emphasis Type="Italic"> Ecklonia radiata</Emphasis> in north-eastern New Zealand

The lysianassid amphipod Orchomenella aahu was associated with small-scale mass mortality of Ecklonia radiata, the dominant laminarian alga in north-eastern New Zealand. O. aahu burrowed into and hollowed out stipes with severe bleaching, accelerating mortality by 12–14 months. Meristoderm tissue of bleached plants contained approximately one-third of the phlorotannin content (~4% dry mass) present in unbleached, apparently healthier, sporophytes (~12% dry mass). Unbleached stages consistently lacked amphipod damage. O. aahu also colonised plants when non-lethal storm damage afforded entry into the cortical layers of the primary lamina, and ultimately the stipe. O. aahu typically consumed both medullary and cortical tissue of the stipes, forming networked brood-chambers within them, with increasing populations often reducing the plant to the holdfast. There was synchronised mortality across sites and between depths over spatial scales of metres. Following loss of the mature canopy, recruitment of E. radiata was generally within 2 months at most study sites where mortality had occurred.Communicated by G.F. Humphrey, Sydney     

Field testing of particulate matter continuous emission monitors at the DOE Oak Ridge TSCA incinerator. Toxic Substances Control Act

A field study to evaluate the performance of three commercially available particulate matter (PM) continuous emission monitors (CEMs) was conducted in 1999-2000 at the US Department of Energy (DOE) Toxic Substances Control Act (TSCA) Incinerator. This study offers unique features that are believed to enhance the collective US experience with PM CEMs. The TSCA Incinerator is permitted to treat PCB-contaminated RCRA hazardous low-level radioactive wastes. The air pollution control system utilizes MACT control technology and is comprised of a rapid quench, venturi scrubber, packed bed scrubber, and two ionizing wet scrubbers in series, which create a saturated flue gas that must be conditioned by the CEMs prior to measurement. The incinerator routinely treats a wide variety of wastes including high and low BTU organic liquids, aqueous, and solid wastes. The various possible combinations for treating liquid and solid wastes may present a challenge in establishing a single, acceptable correlation relationship for individual CEMs. The effect of low-level radioactive material present in the waste is a unique site-specific factor not evaluated in previous tests. The three systems chosen for evaluation were two beta gauge devices and a light scattering device. The performance of the CEMs was evaluated using the requirements in draft Environmental Protection Agency (EPA) Performance Specification 11 (PS11) and Procedure 2. The results of Reference Method 5i stack tests for establishing statistical correlations between the reference method data and the CEMs responses are discussed.     

Volatilization and degradation of soil-applied dimethylselenide

Dimethylselenide (DMSe) is a highly volatile gas that is produced by indigenous microorganisms in seleniferous soils and sediments; however, little is known about the soil conditions that affect the persistence of DMSe and its transport to the atmosphere. In this study we investigated the effect of moisture content, temperature, and organic amendments on the degradation of soil-applied DMSe. The degradation of DMSe was entirely a result of biological mechanisms, but changes in temperature (20-40 degrees C) and soil moisture content (30-70% of the maximum water holding capacity) had little influence on the degradation rate. In contrast, amending soil with either 1% casein or gluten (by weight) had an inhibitory effect on the degradation of DMSe. After 18 d, 2.1 times more DMSe was present in the casein-amended soil and 2.6 times more DMSe was present in the gluten-amended soil. The transport of DMSe in packed soil columns was also investigated. Increasing the depth to soil surface was found to significantly decrease the amount of DMSe transported to the air. After 6 d, 57% of DMSe injected 10 cm below the soil surface was volatilized. At an injection depth of 20 cm the cumulative emissions were reduced by 38% and at 30 cm the cumulative emissions were reduced by 51%. In columns containing 1% casein or gluten in the top 5 cm of soil the cumulative loss of DMSe was about 9% higher than in unamended soil. Increasing our understanding of the soil conditions that influence the gaseous diffusion of DMSe should help in determining the feasibility of using Se volatilization as a remediation technique.