Development of regenerative dye impregnated mesoporous silica materials for assessing exposure to ammonia

The mesostructured materials MCM-41 and SBA-15 were studied as possible supports of bromocresol green (BG) dye impregnation for the ammonia gas detection because of their large surface area, high regenerative property, and high thermal stability. X-ray diffraction, transmission electron microscopy, scanning electron microscope, and N2 adsorption analysis were used to characterize the prepared materials. These materials could sense ammonia via visible color change from yellowish-orange to blue color. The color change process of the nanostructured materials was fully reversible during 10 cyclic tests. The results indicated that the ammonia absorption responses of the two nanostructured materials were both very sensitive, and high linear correlation and high precision were achieved. As the gaseous ammonia concentrations were 50 and 5 ppmv, the response times for the SBA-15/BG were only 1 and 5 min, respectively. Moreover the BG dye-impregnated SBA-15 was less affected by the variation in the relative humidity. It also had faster response for the detection of NH3, as well as lower manufacturing price as compared to that of the dye-impregnated MCM-41. Such feature enables SBA-15/BG to be a very promising material for the detection of ammonia gas.     

Size mass distribution of water-soluble ionic species and gas conversion to sulfate and nitrate in particulate matter in southern Taiwan

A Micro-Orifice Uniform Deposition Impactor (MOUDI) and a Nano-MOUDI were employed to determine the size-segregated mass distributions of ambient particulate matter (PM) and water-soluble ionic species for particulate constituents. In addition, gas precursors, including HCl, HONO, HNO₃, SO₂, and NH₃ gases, were analyzed by an annular denuder system. PM size mass distribution, mass concentration, and ionic species concentration were measured during the day and at night during episode and non-episode periods in winter and summer. Average total suspended particle (TSP) concentrations during episode days in winter were as high as 153?±?33 μg/m³, and PM mass concentrations in summer were as low as one-third of that in winter. Generally, PM concentration at night was higher than that in the daytime in southern Taiwan during the sampling periods. In winter during the episode periods, the size-segregated mass distribution of PM mass concentration was mostly in the 0.32–3.2-μm range, and the PM concentration increased significantly in the range of 0.32–3.2 μm at night. Ammonium, nitrate, and sulfate were the dominant water-soluble ionic species in PM, contributing 34–48 % of TSP mass. High concentrations of ammonia (12.9–49 μg/m³) and SO₂ (2.6–27 μg/m³) were observed in the gas precursors. The conversion ratio was high in the PM size range of 0.18–3.2 μm both during the day and at night in winter, and the conversion ratio of episode days was 20 % higher than that of non-episode days. The conversion factor was high for both nitrogen and sulfur species at nighttime, especially on episode days.     

Performance measurement for incineration plants using multi-activity network data envelopment analysis: The case of Taiwan

This study proposes the use of multi-activity network data envelopment analysis to appraise how incineration plants in Taiwan perform. Sample data from 2006 is used to examine the trade-offs between efficiency enhancement and pollution abatement. The respective efficiencies of the waste treatment and electricity generation are also assessed in a unified framework. The empirical results indicate that it is more important to improve the efficiency of waste treatment activity than of electricity generation activity in order to enhance the overall performance of Taiwan's incinerators. Since ownership, location and length of operations do not in general affect their performance, any improvement has to come from the careful monitoring of each process of the waste treatment operations. Furthermore, given that the policy in Taiwan has moved away from incineration to recycling, the problem of an over-supply of incinerators may become apparent in the near future. Our results indicate that the availability of capacity size may be an important factor when policy-makers consider whether to close down some existing incinerators.     

Water quality effects of clearcut harvesting and forest fertilization with best management practices

Nine small (2.5 ha) and four large (70-135 ha) watersheds were instrumented in 1999 to evaluate the effects of silvicultural practices with application of best management practices (BMPs) on stream water quality in East Texas, USA. Two management regimes were implemented in 2002: (i) conventional, with clearcutting, herbicide site preparation, and BMPs and (ii) intensive, which added subsoiling, aerial broadcast fertilization, and an additional herbicide application. Watershed effects were compared with results from a study on the same small watersheds in 1981, in which two combinations of harvesting and mechanical site preparation without BMPs or fertilization were evaluated. Clearcutting with conventional site preparation resulted in increased nitrogen losses on the small watersheds by about 1 additional kg ha(-1) each of total Kjeldahl nitrogen (TKN) and nitrate-nitrogen (NO(3)-N) in 2003. First-year losses were not significantly increased on the large watershed with a conventional site preparation with BMPs. Fertilization resulted in increased runoff losses in 2003 on the intensive small watersheds by an additional 0.77, 2.33, and 0.36 kg ha(-1) for NO(3)-N, TKN, and total phosphorus, respectively. Total loss rates of ammonia nitrogen (NH(4)-N) and NO(3)-N were low overall and accounted for only approximately 7% of the applied N. Mean loss rates from treated watersheds were much lower than rainfall inputs of about 5 kg ha(-1) TKN and NO(3)-N in 2003. Aerial fertilization of the 5-yr-old stand on another large watershed did not increase nutrient losses. Intensive silvicultural practices with BMPs did not significantly impair surface water quality with N and P.     

Evaluation of the temporal variations of air quality in Taipei City, Taiwan, from 1994 to 2003

Data collected from the five air-quality monitoring stations established by the Taiwan Environmental Protection Administration in Taipei City from 1994 to 2003 are analyzed to assess the temporal variations of air quality. Principal component analysis (PCA) is adopted to convert the original measuring pollutants into fewer independent components through linear combinations while still retaining the majority of the variance of the original data set. Two principal components (PCs) are retained together explaining 82.73% of the total variance. PC1, which represents primary pollutants such as CO, NO(x), and SO(2), shows an obvious decrease over the last 10 years. PC2, which represents secondary pollutants such as ozone, displays a yearly increase over the time period when a reduction of primary pollutants is obvious. In order to track down the control measures put forth by the authorities, 47 days of high PM(10) concentrations caused by transboundary transport have been eliminated in analyzing the long-term trend of PM(10) in Taipei City. The temporal variations over the past 10 years show that the moderate peak in O(3) demonstrates a significant upward trend even when the local primary pollutants have been well under control. Monthly variations of PC scores demonstrate that primary pollution is significant from January to April, while ozone increases from April to August. The results of the yearly variations of PC scores show that PM(10) has gradually shifted from a strong correlation with PC1 during the early years to become more related to PC2 in recent years. This implies that after a reduction of primary pollutants, the proportion of secondary aerosols in PM(10) may increase. Thus, reducing the precursor concentrations of secondary aerosols will be an effective way to lower PM(10) concentrations.     

Comparison of models of simazine transport and fate in the subsurface environment in a citrus farm

Contamination of groundwater by agrochemicals is now widely recognized as an extremely important environmental problem. Modern agricultural practices involve the combined use of irrigation with the application of large amounts of agrochemicals to maximize crop yield. Due to flood irrigation and natural runoff, agricultural activities might generate soil, surface water and groundwater contamination problems and leaching of pesticides. Modeling of the transport and fate of pesticides, such as simazine, may help understand the long-term potential risk to the subsurface environment. This paper illustrates a comparative study via the use of three different pesticide transport simulation models and the applicability of those models in determining the groundwater vulnerability to pesticides contamination in a citrus orchard located at the Lower Rio Grande Valley (LRGV). The three models used in the study are the pesticide root zone model-3 (PRZM-3), the pesticide analytical model (PESTAN) and integrated pesticide transport modeling (IPTM). The concentration values obtained from all three models are in agreement, and they show a decreasing trend from the surface through the vadose zone. The problem is how to use this information and, specifically, how to combine the testimony of a number of experts into a single useful judgment. With the aid of the fuzzy multiattribute decision making method, PRZM-3 is deemed as the most promising one for such precision farming applications.     

化工反应装置危险性分析模式的研究

从近年来化工企业的安全生产事故可以看出,化工生产由于其自身的特点,具有较大的火灾爆炸危险性,因此,正确地对化工企业生产的危险性进行分析,对准确地评价化工企业的安全生产状况非常重要.针对化工企业的安全生产特点,提出了一种针对化工反应装置的危险性分析模式,不仅考虑了生产原料及工艺设备,同时也对工艺过程进行了危险性分析.应用实例表明,该模式对于化工装置的危险性分析具有较强的针对性和可靠性.     

光纤传感器在个体防护装备上的应用进展

1引言 在战场上,个体防护装备对士兵有效地发挥战斗力和避免伤亡起到关键的作用。现代科学技术在军事领域的广泛应用,使得防护装备突破了传统模式,新一代的单兵防护装备不仅要抵御武器的袭击,而且要避免自然环境、化学试剂、火焰和其他战场灾难的危害,须成为高度智能化的作战服。     

Improvements of nano-SiO2 on sludge/fly ash mortar

Sewage sludge ash has been widely applied to cementitious materials. In this study, in order to determine effects of nano-SiO(2) additives on properties of sludge/fly ash mortar, different amounts of nano-SiO(2) were added to sludge/fly ash mortar specimens to investigate their physical properties and micro-structures. A water-binding ratio of 0.7 was assigned to the mix. Substitution amounts of 0%, 10%, 20%, and 30% of sludge/fly ash (1:1 ratio) were proposed. Moreover, 0%, 1%, 2%, and 3% of nano-SiO(2) was added to the mix. Tests, including SEM and compressive strength, were carried out on mortar specimens cured at 3, 7, and 28 days. Results showed that sludge/fly ash can make the crystals of cement hydration product finer. Moreover, crystals increased after nano-SiO(2) was added. Hence, nano-SiO(2) can improve the effects of sludge/fly ash on the hydration of mortar. Further, due to the low pozzolanic reaction active index of sludge ash, early compressive strengths of sludge/fly ash mortar were decreased. Yet, nano-SiO(2) could help produce hydration crystals, which implies that the addition of nano-SiO(2) to mortar can improve the influence of sludge/fly ash on the development of the early strength of the mortar.     

Optimal Design of a Multi-Pollutant Air Quality Monitoring Network in a Metropolitan Region Using Kaohsiung, Taiwan as an Example

An air quality monitoring network (AQMN) usually performs the basic function of assessment of regional air quality and demonstration of compliance with ambient air quality standards in an urban area. Different pollutants, however, may present different characteristic variabilities due to their specific emission patterns, rates of diffusion, and transport and transformation behaviors. But the costs of siting in a pollutant-specific monitoring network would be higher than that for a common network with respect to several pollutants monitored simultaneously. This paper presents a survey of multi-pollutant design principles and optimal searches for siting patterns of an AQMN using both simulation and optimization models as a combined tool. While conservative, quasi-stable, and reactive pollutants are considered in the design principles, cost, coverage effectiveness, and spatial correlation characteristics are included in the multi-criteria decision making process. For illustrative purpose, a series of technical settings and two types of objectives were examined in the case study for the city of Kaohsiung in Taiwan.