Emission of PCDD/Fs and dioxin-like PCBs from metallurgy industries in S. Korea

The metallurgy industry and municipal waste incinerators are considered the main sources of polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs) in many countries. This study investigated the emission factors and total emissions of PCDD/Fs and dioxin-like polychlorinated biphenyls (PCBs) emitted from metallurgy industries (including ferrous and nonferrous foundries) in Korea. The toxic equivalency (TEQ) emission factor of PCDD/Fs was the highest for secondary copper production, at 24451 ng I-TEQ/ton. The total estimated emissions of PCDD/Fs from these sources were 35.259 g I-TEQ/yr, comprising 0.088 g I-TEQ/yr from ferrous foundries, 31.713 g I-TEQ/yr from copper production, 1.716 g I-TEQ/yr from lead production, 0.111 g I-TEQ/yr from zinc production, and 1.631 g I-TEQ/yr from aluminum production. The total estimated annual amounts of dioxin-like PCBs emitted from these sources were 13.260 g WHO-TEQ/yr, comprising 0.014 g WHO-TEQ/yr from ferrous foundries, 12.675 g WHO-TEQ/yr from copper production, 0.170 g WHO-TEQ/yr from lead production, 0.017 g WHO-TEQ/yr from zinc production, and 0.384 g WHO-TEQ/yr from aluminum production. The highest emission factor was found for secondary copper smelting, at 9770 ng WHO-TEQ/ton.     

Evaluation of the emission characteristics of PCDD/Fs from electric arc furnaces

Distribution of PCDD/F (polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran) congeners at two electric arc furnaces (EAFs) in Taiwan is evaluated via intensive stack sampling and analysis. Two kinds of exhaust system in EAFs including stack system and shutter system are selected for measuring dioxin emissions. In addition, dioxin emissions during oxidation and reduction stages at EAF-A were characterized. Results indicate that the PCDD/F concentration of stack gas in EAF-A was 4.39 ng/N m³ while total Toxic Equivalent Quantity (TEQ) concentration was 0.35 ng I-TEQ/N m³. The PCDD/F concentration of stack gas in EAF-B was 2.20 ng/N m³ and the TEQ concentration was 0.14 ng I-TEQ/N m³. 1,2,3,4,6,7,8-H_pCDF, OCDD and OCDF are the major contributors of the dioxin concentrations for two EAFs investigated and the percentage of PCDD/F in particulate phase increases as the chlorination level of the PCDD/F congener increases. The results obtained on gas/particulate partitioning of PCDD/Fs in flue gases prior to the APCD in EAFs indicate that more than 90% exists in particulate phase. In EAF-A, the PCDD/F concentration during oxidation stage is slightly higher than that measured during reduction stage, including the sampling points of CO converter outlet, prior to bag filter and stack. Majority of PCDD/Fs emitted from steel-making processes exists in particulate-phase (about 60–70%) at both EAFs investigated.     

Chemical characterization of fine particles from on-road vehicles in the Wutong tunnel in Shenzhen, China

Vehicle populations in China have been increasing sharply since 1990s. Vehicle emissions including various gaseous pollutants and particulate matter cause deterioration of air quality. However, measurements of particulate mater from on-road vehicles in China are scarcely reported, and thus the chemical compositions of particles emitted from vehicles in China are unknown. In this research, tunnel experiments were performed to measure PM2.5 in the Wutong tunnel, Shenzhen, China. Detailed PM2.5 chemical compositions, with organic compounds determined by GC/MS, in the tunnel were presented. Elemental carbon and organic matter composed 63% and 34% of the total PM2.5 mass in the Wutong tunnel, respectively. Alkanes, PAHs, hopanes, fatty acids, and dicarboxylic acids were the major identified organic compounds, and their source profiles in the PM2.5 in the Wutong tunnel were characterized. The comparisons of our measurements with those in the literature were also made to demonstrate the characteristics of the vehicle source profiles in the Wutong tunnel. The experimental results in this paper can improve understanding of particulate matter emitted from vehicles in China.     

Partitioning and removal of dioxin-like congeners in flue gases treated with activated carbon adsorption

Activated carbon adsorption is commonly used to control dioxin-like congener (PCDD/Fs and PCBs) emissions. Partitioning of PCDD/Fs and PCBs between vapor and solid phases and their removal efficiencies achieved with existing air pollution control devices (APCDs) at a large-scale municipal waste incinerator (MWI) and an industrial waste incinerator (IWI) are evaluated via intensive stack sampling and analysis. Those two facilities investigated are equipped with activated carbon injection (ACI) with bag filter (BF) and fixed activated carbon bed (FACB) as major PCDD/F control devices, respectively. Average PCDD/F and PCB concentrations of stack gas with ACI+BF as APCDs are 0.031 and 0.006ng-TEQ/Nm(3), and that achieved with FACB are 1.74 and 0.19ng-TEQ/Nm(3) in MWI and IWI, respectively. The results show that FACB could reduce vapor-phase PCDD/Fs and PCBs concentrations in flue gas, while the ACI+BF can effectively adsorb the vapor-phase dioxin-like congener and collect the solid-phase PCDD/Fs and PCBs in the meantime. Additionally, the results of the pilot-scale adsorption system (PAS) experimentation indicate that each gram activated carbon adsorbs 105-115ng-PCDD/Fs and each surface area (m(2)) of activated carbon adsorbs 10-25ng-PCDD/Fs. Based on the results of PAS experimentation, this study confirms that the surface area of mesopore+macropore (20-200A) of the activated carbon is a critical factor affecting PCDD/F adsorption capacity.     

Relationships between the abnormalities of the male reproductive organs and the accumulation of phenol compounds in the striped field mouse, Apodemus agrarius, inhabiting Korea

The relationships between the abnormalities of the male reproductive organs in striped field mice and the accumulation of endocrine-disrupting chemicals were assessed. Most mice collected at three areas were contaminated with phenol or organotin compounds. Fourteen to 42% of the mice at each area had abnormally shrunken reproductive organs, and some of them were contaminated with high levels of phenol compounds. Moreover, all the shrunken reproductive organs were damaged in the histological structure. The damage was observed also from several mice accumulating a high level of phenol compounds even though they had normally developed reproductive organs, although no damage was found in the mice accumulating a high level of organotin compounds. Collectively, the abnormalities of the reproductive organs in the mice seemed to be related to the accumulation of phenol compounds rather than of organotin compounds.     

无排泥运行MBR处理不同浓度氨氮废水及其生物特性

考察了水力停留时间(HRT)为10 h时无排泥运行下膜-生物反应器(MBR)处理不同浓度氨氮无机废水的运行性能及微生物特性.结果表明,在处理NH₄⁺-N≤500 mg/L的废水时,氨氮转化率可达99%且反应器内微生物增长缓慢,比硝化速率从0.2kg/(kg·d)升至0.52 kg/(kg·d);当NH₄⁺-N≥700 mg/L时,出水亚硝酸氮和氨氮相继出现明显累积,比硝化速率随之下降至0.4kg/(kg·d)以下,反应器内生物量从3 200 mg/L上升至6 700 mg/L.反应器中的氨氧化菌维持在10⁷CFU/mL,亚硝酸盐氧化菌从10⁶CFU/mL下降至10³CFU/mL.系统内的溶解性微生物产物(以TOC表示)升至65 mg/L后保持稳定,出水TOC一直维持在3～4mg/L;细胞外分泌物(EPS)在膜的截流作用下随运行时间的延长积累至600 mg/L.     

聚糖菌颗粒污泥基于胞内储存物质的同步硝化反硝化

采用特殊运行方式的厌氧-好氧SBR系统(厌氧后排水),以乙酸钠为有机基质成功富集了聚糖菌颗粒污泥.聚糖菌颗粒污泥厌氧-好氧批式实验表明,聚糖菌颗粒污泥具有较强的SND能力,TOC/N分别为5.0,4.0,2.8时,SND效率分别96.4%、95.3%及96.2%,而周期总氮去除效率随着碳氮比降低而降低,分别为66.0%、61.2%及56.3%.通过对周期氨氮、亚硝酸盐氮、硝酸盐氮、TOC以及胞内糖原、PHB变化的测定分析,证明聚糖菌颗粒污泥SND过程中,污泥以厌氧阶段储存于胞内的多聚物PHB作为反硝化碳源,并且反硝化聚糖菌是系统中反硝化能力的来源.与溶解性基质相比,PHB的降解速率相对较低,因此在SND过程中,反硝化可以与硝化保持相近的速率,从而有助于获得良好的SND效果.     

Variations of bacterial community structure in flooded paddy soil contaminated with herbicide quinclorac

The denaturing gradient gel electrophoresis (DGGE) method was applied to determine the relative genetic complexity of microbial communities in flooded paddy soil treated with herbicide quinclorac (3,7-dichloro-8-quinoline-carboylic acid). The results obtained showed a significant effect of quinclorac on the development of bacterial populations in soils contaminated with different concentrations of the herbicide at the early time after application. In general, however, the number of populations of the same soil sample treated with the same concentration of the quinclorac differed obviously with increasing incubation time within the early 8 weeks. The scale of differences in banding patterns-showed that the microbial community structures of the quinclorac-treated and non-quinclorac-treated soils were not significantly different after 21 weeks of incubation. Quantification, as demonstrated in this paper, was studied by establishing dose-response relationships. Significant pattern variations were quantified. Prominent DGGE bands were excised, cloned and sequenced to gain insight into the identities of predominant bacterial populations. The majority of DGGE band sequences were related to bacterial genera Clostridium, Sphingobacterium, Xanthomonas and Rhodococcus.     

Prediction for energy content of Taiwan municipal solid waste using multilayer perceptron neural networks

In the past decade, the treatment amount of municipal solid waste (MSW) by incineration has increased significantly in Taiwan. By year 2008, approximately 70% of the total MSW generated will be incinerated. The energy content (usually expressed by lower heating value [LHV]) of MSW is an important parameter for the selection of incinerator capacity. In this work, wastes from 55 sampling sites, including villages, towns, cities, and remote islands in the Taiwan area, were sampled and analyzed once a season from April 2002 to March 2003 to determine the waste characteristics. The LHV of MSW in Taiwan was predicted by the multilayer perceptron (MLP) neural networks model using the input parameters of elemental analysis and dry- or wet-base physical compositions. Although all three of the models predicted LHV values rather accurately, the elemental analysis model provided the most accurate prediction of LHV values. Additionally, the wet-base physical composition model was the easiest and most economical. Therefore, the waste treatment operators can choose the more appropriate analysis method considering situations themselves, such as time, equipment, technology, and cost.     

Assessment of control strategies for reducing volatile organic compound emissions from the polyvinyl chloride wallpaper production industry in Taiwan

This study attempts to assess the effectiveness of control strategies for reducing volatile organic compound (VOC) emission from the polyvinyl chloride (PVC) wallpaper production industry. In Taiwan, methyl ethyl ketone, TOL, and cyclohexanone have comprised the major content of solvents, accounting for approximately 113,000 t/yr to avoid excessive viscosity of plasticizer dioctyl phthalate (DOP) and to increase facility in working. Emissions of these VOCs from solvents have caused serious odor and worse air quality problems. In this study, 80 stacks in five factories were tested to evaluate emission characteristics at each VOC source. After examining the VOC concentrations in the flue gases and contents, the VOC emission rate before treatment and from fugitive sources was 93,000 and 800 t/yr, respectively. In this study, the semiwet electrostatic precipitator is recommended for use as cost-effective control equipment.