GB/T28001-2011 4.3.1要素关键点分析

从危险源辨识和风险评价程序、方法和控制措施的确定几个方面,对GB/T28001-2011《职业健康安全管理体系要求》的4.3.1要素进行了关键点分析.     

“固化赤泥-人工膜”复合防渗材料研究

赤泥本身具有良好的防渗性能,加入石灰作为激发剂,更可提高其防渗性。根据《土工合成材料测试手册》和GB/T 50123—1999《土工试验方法标准》进行渗透试验,结果表明:室内试验在赤泥中加入8%石灰,并夹一层人工防渗膜形成的复合防渗材料,在固化28 d后,其渗透系数可达(7.3～7.4)×10-9 cm/s。在工业试验中,夹入不同厚度和质地的人工防渗膜的石灰(8%)固化赤泥,渗透系数可达到6.32×10-9～1.89×10-7 cm/s。研究成果在中原某铝厂赤泥堆场防渗工程中得到了应用。     

大气气溶胶中元素种态研究

应用化学逐级提取流程对国际原子能机构（简称IAEA）气溶胶、室内和室外气溶胶、煤飞灰中元素的组成和种态进行了分析,应用仪器中子活化法测定了各种态中元素的含量,计算出元素在各种态中的分配比例。按照气溶胶中元素不同种态的环境和生物活性以及主要来源来分类,评述了元素在环境和生态系统中的吸收和转化能力,并对气溶胶中元素对环境的影响作出了初步的探讨。实验数据表明,气溶胶中的不同元素在各种态中的分布是有差异的。地壳来源元素中,Sc,Al,Fe和Ti主要分布在不溶物态中,稀土元素主要分布在氧化物态和不溶物态;不溶物态沉降到地表后不易进行迁移和转化,对环境的影响较小;氧化物态性质比较活泼,可以在大气中发生化学反应。Mn在气溶胶中主要分布在水可溶态和氧化物态,环境可交换性要比Al,Fe,Ti等大得多。人为来源元素的环境可交换态的比例都比较高,这说明它们通过干、湿清除过程沉降到地表后,水可溶态可以直接进入水循环;碳酸盐、氧化物和有机物态可以在适当的条件下与环境中的其他物质发生化学反应,生成易溶于水的化合物进入生态环境中,对环境影响较大。     

生物炭/铁酸镧磁性复合材料的制备及对亚甲基蓝的吸附性能

为获得吸附性能良好、便于回收利用的新型吸附剂以处理染料废水,采用超声辅助溶胶-凝胶法将铁酸镧(LaFeO_3)经过一步热解负载于生物炭制得生物炭/LaFeO_3磁性复合材料(BC/FL)。其表面形态、结构和组成分析表明:BC/FL的比表面积、总孔容及平均孔径分别为34.67m2/g、0.041cm3/g和7.82nm,磁饱和强度达到40.283A/m,表面含有C=O、C=C=N、C≡C等官能团。批量吸附实验表明,25℃下,当亚甲基蓝(MB)的初始质量浓度为30mg/L时,BC/FL的最佳投加量为1.5g/L,吸附反应在120min达到平衡,去除率可达92.3%,且吸附效果基本不受pH影响。BC/FL对MB的吸附符合准二级动力学模型,Langmuir模型可描述其等温吸附过程。化学吸附占主导地位,主要机理为静电吸附、氢键和π-π共轭作用。吸附反应为单分子层吸附且为自发的吸热过程。     

Biodegradation of phthalate esters by two bacteria strains

In this study two aerobic phthalic acid ester (PAE) degrading bacteria strains, DK4 and O18, were isolated from river sediment and petrochemical sludge, respectively. The two strains were found to rapidly degrade PAE with shorter alkyl-chains such diethyl phthalate (DEP), dipropyl phthalate (DPrP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP) and diphenyl phthalate (DPP) are very easily biodegraded, while PAE with longer alkyl-chains such as dicyclohexyl phthalate (DCP) and dihexyl phthalate (DHP) and di-(2-ethylhexyl) phthalate (DEHP) are poorly degraded. The degradation rates of the eight PAEs were higher for strain DK4 than for strain O18. In the simultaneous presence of strains DK4 and O18, the degradation rates of the eight PAEs examined were enhanced. When the eight PAEs were present simultaneously, degradation rates were also enhanced. We also found that PAE degradation was delayed by the addition of nonylphenol or selected polycyclic aromatic hydrocarbons (PAHs) at a concentration of 1 microg/g in the sediment. The bacteria strains isolated, DK4 and O18, were identified as Sphigomonas sp. and Corynebacterium sp., respectively.     

Effects of water-emulsified fuel on a diesel engine generator’s thermal efficiency and exhaust

Water-emulsified diesel has proven itself as a technically sufficient improvement fuel to improve diesel engine fuel combustion emissions and engine performance. However, it has seldom been used in light-duty diesel engines. Therefore, this paper focuses on an investigation into the thermal efficiency and pollution emission analysis of a light-duty diesel engine generator fueled with different water content emulsified diesel fuels (WD, including WD-0, WD-5, WD-10, and WD-15). In this study, nitric oxide, carbon monoxide, hydrocarbons, and carbon dioxide were analyzed by a vehicle emission gas analyzer, and the particle size and number concentration were measured by an electrical low-pressure impactor. In addition, engine loading and fuel consumption were also measured to calculate the thermal efficiency. Measurement results suggested that water-emulsified diesel was useful to improve the thermal efficiency and the exhaust emission of a diesel engine. Obviously, the thermal efficiency was increased about 1.2 to 19.9%. In addition, water-emulsified diesel leads to a significant reduction of nitric oxide emission (less by about 18.3 to 45.4%). However, the particle number concentration emission might be increased if the loading of the generator becomes lower than or equal to 1800 W. In addition, exhaust particle size distributions were shifted toward larger particles at high loading. The consequence of this research proposed that the water-emulsified diesel was useful to improve the engine performance and some of exhaust emissions, especially the NO emission reduction.

Implications:The accumulated test results provide a good basis to resolve the corresponding pollutants emitted from a light-duty diesel engine generator. By measuring and analyzing transforms of exhaust pollutant from this engine generator, the effects of water-emulsified diesel fuel and loading on emission characteristics might be more clear. Understanding reduction of pollutant emissions during the use of water-emulsified diesel helps improve the effectiveness of the testing program. The analyzed consequences provide useful information to the government for setting policies to curb pollutant emissions from a light-duty diesel engine generator more effectively.     

Reactions of compost-derived humic substances with lead, copper, cadmium, and zinc

Thermodynamic stability constants of the formation of complexes from the reactions of humic substances with various metals are usually used as parameters to judge the reactivities of both humic substances and metals. However, in calculating the thermodynamic stability constants, complicated processes for the acquisition of activities of components in reactions are absolutely inevitable. In this study, we investigated the average conditional concentration quotients of the complexes formed from the reaction of metals with humic substances and the relations of these quotients to thermodynamic stability constants. The characterized humic substances including HA (MW>1,000), FA (MW>1,000), and FA (MW<1,000) extracted from a swine compost were prepared to react with Pb, Cu, Cd, and Zn at 25 degrees C and at pH 4.00 and 6.50. Reactions of HA (MW>1,000), FA (MW>1,000), and FA (MW<1,000) with the four metals were carried out at 1:0.1, 1:0.5, 1:1, 1:5, and 1:10 ligand:metal stoichiometry. The concentrations of the free ions of Pb, Cu, Cd, and Zn in the reaction systems of metal-HA suspensions and metal-FA solutions were measured by anodic stripping voltammetry (ASV). The sequence of the average conditional concentration quotients of the formed complexes from the reaction of humic substances with metals was FA(MW<1,000)>FA(MW>1,000)>HA(MW>1,000), showing the relative reactivities of the fractions of swine compost-derived humic substances. The sequence of reacting metals with humic substances was Pb>Cu>Cd>Zn, which is in good agreement with the sequence reported by judging the thermodynamic stability constants. The average conditional concentration quotients of the formed complexes from the reaction of humic substances with metals were thus useful parameters that can be directly related to thermodynamic stability constants and other parameters.     

关于云南省环境影响评价工作的思考

在概述环境影响评价制度发展历史基础之上,分析了云南省环境影响评价工作现状,指出了面临的突出问题及其影响和危害,并结合突出问题提出了对策建议,以期对促进全省环境影响评价事业健康发展有所裨益。     

Emission of PCDD/Fs and dioxin-like PCBs from metallurgy industries in S. Korea

The metallurgy industry and municipal waste incinerators are considered the main sources of polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs) in many countries. This study investigated the emission factors and total emissions of PCDD/Fs and dioxin-like polychlorinated biphenyls (PCBs) emitted from metallurgy industries (including ferrous and nonferrous foundries) in Korea. The toxic equivalency (TEQ) emission factor of PCDD/Fs was the highest for secondary copper production, at 24451 ng I-TEQ/ton. The total estimated emissions of PCDD/Fs from these sources were 35.259 g I-TEQ/yr, comprising 0.088 g I-TEQ/yr from ferrous foundries, 31.713 g I-TEQ/yr from copper production, 1.716 g I-TEQ/yr from lead production, 0.111 g I-TEQ/yr from zinc production, and 1.631 g I-TEQ/yr from aluminum production. The total estimated annual amounts of dioxin-like PCBs emitted from these sources were 13.260 g WHO-TEQ/yr, comprising 0.014 g WHO-TEQ/yr from ferrous foundries, 12.675 g WHO-TEQ/yr from copper production, 0.170 g WHO-TEQ/yr from lead production, 0.017 g WHO-TEQ/yr from zinc production, and 0.384 g WHO-TEQ/yr from aluminum production. The highest emission factor was found for secondary copper smelting, at 9770 ng WHO-TEQ/ton.     

IS IT REALISTIC TO DEFINE A 100-YEAR DROUGHT FOR WATER MANAGEMENT?1

ABSTRACT: The concept of recurrence interval has been used for years in engineering designs. Can the same concept be applied to the drought analysis? This paper uses the plotting position method to define drought of various recurrence intervals based on stream-flow data. The method of truncation level was applied to the same data to examine the defined drought. Based on the method of truncation level, drought duration and its corresponding flow deficit were investigated. Eighteen flow gage stations from the Scioto River Basin in Ohio were selected for the study. The results show that flows of 100-year droughts using the plotting position method are practically nil. On the other hand, flows of droughts using the truncation method are gradually decreasing with an increase in truncation level, where flows of 95 percent are approximately equal to those of two-year droughts defined by the plotting position. It is also shown that there is a strung correlation between drought duration and deficit.