我国水环境有机物分析前处理技术

介绍了我国水环境有机物分析中常用的前处理技术,包括液液萃取、树脂吸附、固相萃取、固相微萃取、液膜萃取、半透膜被动采样、顶空、吹扫-捕集等,归纳了各种方法的原理、应用及优缺点,并对环境中有机污染物前处理技术的发展方向进行了展望。     

大气环境数据分析预测方法对比研究

以西安市2006年9月27日至2008年5月3日每日的SO2平均浓度时间序列为例,应用时间序列分析对前555个数据进行拟合,得到合适的时间序列模型ARIMA(1,1,2);利用神经网络中的BP神经网络和RBF神经网络对同样的样本进行训练,用这三种方法对2008年4月4日至2008年5月3日的SO2日均浓度值进行了预测,并用同样的方法分析预测了同期PM10日均浓度值,最后比较了它们的预测效果。结果表明,利用这三种方法进行浓度预测都是可行的,其中RBF神经网络法的预测误差最小,效果最好。     

测定环境空气中砷及其化合物的方法改进

对《空气和废气监测分析方法》中砷的采样和测定方法进行了改进,并在云南某炼铜厂环境空气中含砷监测进行了实际验证。结果表明,方法的检出限、精密度、准确度均能满足测定的要求,并且更适合测定高浓度砷。     

克拉玛依市核技术应用单位安全监管中应注意的几个问题

克拉玛依市的核技术应用逐渐增多,带给人们在工作、生活等方面快捷和高效的同时,随之也带来了潜在的辐射安全隐患,辐射风险由此增加。本文探讨了在辐射环境管理中监管执法面临的实际问题和解决问题的思路。强调了监管的重要性。     

A mini review of fluoride-induced apoptotic pathways

Fluorine or fluoride can have toxic effects on bone tissue and soft tissue at high concentrations. These negative effects include but not limited to cytotoxicity, immunotoxicity, blood toxicity, and oxidative damage. Apoptosis plays an important role in fluoride-induced toxicity of kidney, liver, spleen, thymus, bursa of Fabricius, cecal tonsil, and cultured cells. Here, apoptosis activated by high level of fluoride has been systematically reviewed, focusing on three pathways: mitochondrion-mediated, endoplasmic reticulum (ER) stress-mediated, and death receptor-mediated pathways. However, very limited reports are focused on the death receptor-mediated apoptosis pathways in the fluoride-induced apoptosis. Therefore, understanding and discovery of more pathways and molecular mechanisms of fluoride-induced apoptosis may contribute to designing measures for preventing fluoride toxicity.     

Robust Regression with Data-Dependent Regularization Parameters and Autoregressive Temporal Correlations

We introduce robust procedures for analyzing water quality data collected over time. One challenging task in analyzing such data is how to achieve robustness in presence of outliers while maintaining high estimation efficiency so that we can draw valid conclusions and provide useful advices in water management. The robust approach requires specification of a loss function such as the Huber, Tukey’s bisquare and the exponential loss function, and an associated tuning parameter determining the extent of robustness needed. High robustness is at the cost of efficiency loss in parameter loss. To this end, we propose a data-driven method which leads to more efficient parameter estimation. This data-dependent approach allows us to choose a regularization (tuning) parameter that depends on the proportion of “outliers” in the data so that estimation efficiency is maximized. We illustrate the proposed methods using a study on ammonium nitrogen concentrations from two sites in the Huaihe River in China, where the interest is in quantifying the trend in the most recent years while accounting for possible temporal correlations and “irregular” observations in earlier years.     

原子荧光法测定水中汞的原子化条件研究

分别采用热原子化原子荧光法(热汞法)和冷原子化原子荧光法(冷汞法)测定水中汞,比较了两种方法的检出限、线性相关系数、准确度和精密度的差异。冷汞法和热汞法的检出限分别为0.003和0.01μg/L,标准曲线相关系数分别为0.999 9和0.999 7,加标回收率范围分别为102%~106%和106%~113%。结果表明,冷汞法比热汞法具有更低的检出限,灵敏度和准确度也略优于热汞法。对于冷汞法,提高负高压有利于提高方法的灵敏度、准确度,并具有更低的方法检出限。     

《环境监测 分析方法标准制修订技术导则》(HJ 168—2010)对土壤环境监测标准制修订适用性探讨

针对土壤环境监测的复杂性和特殊性,从空白试验、检出限、方法验证、质量控制和标准文本等方面,指出了《环境监测分析方法标准制修订技术导则》《HJ 168—2010》对土壤环境监测标准制修订工作的适用性和执行中存在的问题。提出,为保证土壤标准制修订质量和标准执行质量,应研究适宜土壤监测方法标准的质量控制指标体系和评价体系,及时修订《HJ 168—2010》或发布补充要求;对现有土壤监测方法标准进行技术评估,加强对于土壤标准制修订工作的指导和监管。     

江苏省2014-2016年臭氧污染区域特征分析

分析2014—2016年江苏省O₃污染状况,以及苏北、苏中和苏南3个典型区域O₃年度、季度、日变化和频度占比等分布特征。结果表明,江苏省的O₃空间分布呈现北低南高,2014—2016年的O₃超标占比由18.4%上升至34.9%;2016年苏北、苏中和苏南地区O₃-8h第90百分位数与2014年相比,上升2.7%,21.8%和3.3%;3个区域夏季O₃-8h均值最高,春、秋2季次之,冬季最低;O₃-1h日变化呈单峰状态,最低值出现在06:00—07:00,最高值出现在15:00—16:00;2016年3个地区的O₃频度占比均呈正态分布,主要集中在40~80 μg/m³,所占比例均>15%;苏中和苏南区域2016和2014年相比O₃频率占比的变化幅度较大,苏北地区变化幅度不大。指出,江苏省的O₃污染程度在逐年提高,污染范围从苏南逐渐往中部和北部城市扩大。     

Technological innovation paths toward green industry in China

With the environmental carrying capacity reaching its limits and the decreasing margin benefits of traditional production factors, the green transformation and green development through technological innovations has been a major direction for the future development of Chinese industries. However, the characteristics and heterogeneities of various types of industries call for different approaches regarding technological innovations. How to choose the most effective mode of technological innovation according to the characteristics of a certain industry has been a key issue. This paper measures the green total factor productivity of 32 industrial trades using the Slacks Based Measure(SBM)-DDF method. The effects of three innovation modes in the green transformation of industrial industry, including the independent innovation(Ⅱ), the technology introduction(TI), and the government support(GS), are empirically analyzed based on industry heterogeneity. Results indicate that the green total factor productivities of different industries show significant differences if taking into account the energy input and the undesirable output of pollutant emissions. The green total factor productivities of traditional high input,high pollution, and high energy consumption industrial trades were significantly lower than those with obvious green features. The year of 2009 is a leap year for the industrial green transformation in China. For resource-intensive industries, the II and the GS are the important ways to achieve green transformation. For labor-intensive industries, the TI is the best path to achieve green transformation, while for technology-intensive industries, the II is the primary driving force for the promotion of green developments. In addition, the innovation-compensating effect of the current Chinese environmental regulations to the resource-intensive industries has been revealed. Improving the overall scale and the industrial concentration of the industries is also beneficial for the green transformation of the industries.