Trout farm effluents: characterization and impact on the receiving streams

Effluents from three rainbow trout (Oncorhynchus mykiss) farms located in Northern Portugal were characterized and their impact on the receiving streams was evaluated. Mean fish productions in the studied fish farms were 15, 55 and 500 t of trout per year, respectively. The feeding water was abstracted from Fornelo, Inha and Coura Rivers, at flow rates ranging from 1.2 (15 t year(-1) fish farm) to 4.8 litre s(-1) per ton annual fish production (500 t year(-1) fish farm). As the water flows through the farms, net variations in the chemical characteristics were observed: a mean reduction in the dissolved oxygen (DO) concentration between 0.7 and 2.4 mg litre(-1); mean increases between 1.9 and 3.2 mg CaCO3 litre(-1) for total alkalinity, between 0.9 and 14 mg litre(-1) for BOD5, between 0.27 and 1.46 mg litre(-1) for ammonia nitrogen (NH4-N), between 0.060 and 0.579 mg litre(-1) for soluble phosphorus (PO4-P) and less than 16 mg litre(-1) for suspended solids; variations in the pH value and nitrate nitrogen concentration were not statistically significant (p<0.05). At the 500 t year(-1) fish farm it was also possible to detect net increases of total hardness (3.2 mg CaCO3 litre(-1)), electric conductivity (19 mS cm(-1)) and permanganate value (3.6 mgO2 litre(-1)). At the other farms net variations in these parameters were not significant. Net mass flow variations reported to the annual fish production are presented. The DO mass flow decreased, on average, between 255 and 549 g t(-1) of fish per day. The mean daily BOD5 increase ranged from 353 to 1510 g t(-1) of fish. The corresponding ranges for the other parameters were 105-157 g t(-1) for NH4-N, 24-62 g t(-1) for PO4-P, 348-1035 g CaCO3 t(-1) for total alkalinity and 224 x 10(6)-506 x 10(6) t(-1) for mesophilic bacteria. Daily net variations of suspended solids, total hardness, electric conductivity and permanganate value were below 1753 g t(-1), 342 g CaCO3 t(-1), 2081 mS cm t(-1) and 392 gO2 t(-1), respectively. Longitudinal concentration profiles for the most relevant parameters show the impact of the effluent discharges on the physico-chemical and bacteriological river water quality downstream from the trout farms. Analyzing the situations from a purely chemical point of view, the polluted stretches were 3, 5 and 12 km long downstream from the effluent discharges, respectively. The microbiological contamination extended over longer distances.     

Selectivity in the complexation of actinides by humic substances

The interactions of a range of actinide elements (Th, U, Np, Pu, Am) with humic substances from the Needle's Eye natural analogue site were studied by gel permeation chromatography. Bulk humic substances were isolated by ammonia extraction, followed by dialysis against distilled water and freeze-drying. The gel permeation results suggest that Needle's Eye humic substances can be fractionated into three incompletely resolved fractions with average molecular weights determined by analytical ultracentrifugation around 49 000 for Fraction 1, around 14 700 for Fraction 2 and around 8000 for Fraction 3. Although there are significant differences between the organic matter elution patterns in individual gel permeation experiments, presumably due to differences in column packing, these are much smaller than the differences between metal ions. The uranium that is naturally present in these humic substances is largely bound in the late-eluting fraction. Spikes of the early actinides, including Np and Pu in controlled valency states, have been added to the humic substances, and gel permeation of the spiked humic substances shows that the three humic fractions vary greatly in their effectiveness and selectivity as ligands for early actinides.     

Three-fluid retention in porous media involving water, PCE and air

A classical way to obtain three-fluid retention curves in porous media from measured two-fluid retention curves is based on the Leverett concept, which states that the total volumetric liquid content in a water-wet porous medium, containing water, a nonaqueous-phase liquid (NAPL) and air, is a function of the capillary pressure across the interface between the continuous NAPL and air. This functional relationship results from the assumed condition that in a three-fluid porous medium, the intermediate wetting fluid spreads over the water-air interface. Application of Leverett's concept may not be valid, however, for nonspreading NAPLs like perchloroethylene (PCE). This paper discusses measurements of both PCE-air and water-PCE-air retention curves using a long vertical column in conjunction with a dual-energy gamma radiation system. The data indicate that the Leverett concept was applicable only until a critical PCE saturation had been reached.     

Development of a continuously stirred flow cell for investigating sorption mass transfer

This paper introduces a new reversible-flow design for a continuously stirred reactor used to study sorption mass transfer in soil and solvent systems. The stirred reactor has potential advantages over conventional packed column or batch reactors because it isolates intraparticle sorption rate limitations from advective-dispersive transport, yet allows changes to flux through the reactor for analysis of sorption kinetics under dynamic conditions. Previously, stirred reactors have often failed due to clogging of sediment on the effluent frit. The reverse-flow backwashing design allows longer life and higher confidence in maintaining mixed conditions than previous designs. Mass transfer 'rate coefficients estimated from stirred and column experiments are compared; both techniques produced results consistent with a published correlation. The data also show that fitted sorption mass transfer coefficients can be strongly dependent on the choice of equilibrium partition coefficient (i.e. batch or first-moment derived values), and that the conventional two-site sorption kinetics model fails to accurately predict sorption mass transfer in the presence of changing solvent velocity through the reactor.     

Surface complexation modeling of Yb(III) sorption and desorption on hematite and alumina

Sorption and desorption of Yb(III) were studied on hematite and on alumina using a surface complexation model. The experimental methodology was conceived to allow an analysis of the data using a constant capacitance model. The FITEQL code was used for the calculations.The experimental results tend to show reversibility of sorption when the surface loading is small, and irreversibility when the surface loading is high. Surface complexation modeling gives a good interpretation of these two phenomena, taking into account hydroxylation of the surface complexes. In these two cases, it is possible to describe sorption and desorption curves with the same surface stoichiometries and the same surface complexation constants. The existence of these surface complexes depends on the pH of the solution, surface loading, and reaction direction.     

Biodegradation of crosslinked acrylic polymers by a white-rot fungus

Two synthetic superabsorbent crosslinked acrylic polymers were mineralized by the white-rot fungusPhanerochaete chrysosporium. The amount of polymer converted to CO₂ increased as the amount of polymer added to the cultures increased. In the presence of sufficiently large amounts of the superabsorbents, such that all of the culture fluid was absorbed and a gelatinous matrix was formed, the fungus still grew and mineralization was observed. Neither the polymers, nor their degradation products were toxic to the fungus. While the rates of mineralization were low, all of the polymers incubated in the liquid fungal cultures were completely depolymerized to water soluble products within 15–18 days. The depolymerization of the polymers was observed only in nitrogen limited cultures of the fungus which secrete the lignin degradation system, however, the water soluble products of depolymerization were mineralized in both nutrient limited and sufficient cultures of the fungus. The rate of mineralization of the depolymerized metabolites was more than two times greater in nutrient sufficient cultures. Following longer incubation periods, most (> 80 %) of the radioactivity was recovered in the fungal mycelial mat suggesting that carbon of the polymer had been converted to fungal metabolites.     

Germination and seedling development of switchgrass and smooth bromegrass exposed to 2,4,6-trinitrotoluene

It is estimated that explosives contaminate approximately 0.82 million cubic metres of soil at former military installations throughout the US; major contaminants often include 2,4,6-trinitrotoluene (TNT) and its degradation products. At some sites, phytoremediation may be a viable option to incineration or other costly remediation treatments. Grasses may be particularly suited for remediation because of their growth habit and adaptability to a wide range of soil and climate conditions. We characterized the effects of TNT on germination and early seedling development of switchgrass and smooth bromegrass to evaluate their potential use on contaminated sites. Switchgrass and smooth bromegrass seeds were germinated in nutrient-free agar containing 0 to 60 mg TNT litre(-1). Smooth bromegrass germination decreased as TNT concentration increased, while switchgrass germination was unaffected by TNT. Concentrations up to 15 mg TNT litre(-1) did not affect switchgrass root growth rate, but bromegrass root growth was reduced at TNT concentrations above 7.5 mg litre(-1). At 7.5 mg TNT litre(-1), however, shoot growth rate was reduced in both species. Examination at 20-fold magnification revealed switchgrass radicles were unaffected by TNT, while smooth bromegrass radicles appeared slightly swollen. Results indicate switchgrass is more tolerant of TNT than smooth bromegrass, but the establishment of both species may be limited to soil containing less than 50 mg kg(-1) of extractable TNT.     

Three-dimensional patterns of moisture, water repellency, bromide and pH in a sandy soil

Soil water repellency might lead to preferential flow of water and solutes through the unsaturated zone of soils. To study this process in a water repellent sandy field soil, a bromide tracer had been applied on a 2.2 m long and 0.4 m wide plot. The bromide application rate was 8 g/m², and the plot was sampled using 100 cm³ steel cylinders after 52 mm of rainfall in 12 days. A total of seven layers were sampled to a depth of 74 cm. Each layer was sampled at 240 locations in a 40 by 6 grid. All samples were used for the determination of soil water content, degree of actual and potential water repellency, bromide concentration and pH. The spatial distribution of these properties was visualized three-dimensionally and compared. The degree of water repellency, bromide concentration, and pH distribution bore close resemblance to the fingered flow induced soil water content distribution. The degree of potential water repellency was relatively low in places with such fingers. Actual water repellency occurred between the fingers at the dry spots. Bromide was not found, or only in very low concentrations, in such places. Bromide depth profiles clearly indicated the occurrence of diverging flow in the wetter subsoil. Most likely, manuring activities during the last decades resulted in relatively high pH values in the topsoil, and in the subsoil along the recurring fingered flow pathways.     

Chlorohydrocarbons, PCB congeners, polychlorodioxins, furans and dibenzothiophenes in pine needles in the vicinity of a metal reclamation plant

Chlorohydrocarbons, PCB congeners, polychlorodioxins, furans and dibenzothiophenes in pine needles in the vicinity of a metal reclamation plant were analyzed by GC/ECD and GC/MS. Wax and the rest of the needles were analyzed separately. As a rule the concentrations of -HCH (0.5–13.6 ng/g), γ-HCH (0.4–7.3 ng/g), HCB (0.2–3.4 ng/g), PCB congeners (0.2–67 ng/g), PCDDs and PCDFs were higher in the older needles. The ratio of the concentration in the wax to the concentration in the rest of the needles was higher in the younger needles. The concentrations of PCB congeners, TeCDDs and TeCDFs were higher in the needles collected in the area nearest to the plant. The samples, obviously, contained tri- and tetrachlorodibenzothiophenes but these were not determined quantitatively due to interfering peaks in GC/MS.     

Natural phillipsite as a matrix for a slow-release formulation of oxamyl

The performance of phillipsite as a matrix for slow-release formulation of oxamyl [N,N-dimethyl-2-methylcarbamoyl-oxymino-2-(methylthio)acetamide] was tested. The adsorption kinetics followed a first-order law, and the adsorption isotherm fitted well in a two-surface Langmuir model, suggesting a double mechanism of interaction between oxamyl and the sorbent. The sorption mechanism, studied by FTIR, provided two fractions of oxamyl. The first one is sorbed on the mineral surface, linked by H-bonding, and the second one is constituted by a multilayer of oxamyl molecules linked by a water bridge between them. The release kinetics of oxamyl from a substratum zeolite-oxamyl also follows a first-order law, with two stages that correspond to both fractions of oxamyl previously detected.