Development of molecular marker source profiles for emissions from on-road gasoline and diesel vehicle fleets

As part of the Gasoline/Diesel PM Split Study, relatively large fleets of gasoline vehicles and diesel vehicles were tested on a chassis dynamometer to develop chemical source profiles for source attribution of atmospheric particulate matter in California's South Coast Air Basin. Gasoline vehicles were tested in cold-start and warm-start conditions, and diesel vehicles were tested through several driving cycles. Tailpipe emissions of particulate matter were analyzed for organic tracer compounds, including hopanes, steranes, and polycyclic aromatic hydrocarbons. Large intervehicle variation was seen in emission rate and composition, and results were averaged to examine the impacts of vehicle ages, weight classes, and driving cycles on the variation. Average profiles, weighted by mass emission rate, had much lower uncertainty than that associated with intervehicle variation. Mass emission rates and elemental carbon/organic carbon (EC/OC) ratios for gasoline vehicle age classes were influenced most by use of cold-start or warm-start driving cycle (factor of 2-7). Individual smoker vehicles had a large range of mass and EC/OC (factors of 40 and 625, respectively). Gasoline vehicle age averages, data on vehicle ages and miles traveled in the area, and several assumptions about smoker contributions were used to create emissions profiles representative of on-road vehicle fleets in the Los Angeles area in 2001. In the representative gasoline fleet profiles, variation was further reduced, with cold-start or warm-start and the representation of smoker vehicles making a difference of approximately a factor of two in mass emission rate and EC/OC. Diesel vehicle profiles were created on the basis of vehicle age, weight class, and driving cycle. Mass emission rate and EC/OC for diesel averages were influenced by vehicle age (factor of 2-5), weight class (factor of 2-7), and driving cycle (factor of 10-20). Absolute and relative emissions of molecular marker compounds showed levels of variation similar to those of mass and EC/OC.     

Development of cleaner-burning brick kilns in Ciudad Juarez, Chihuahua, Mexico

The following results provide a comparison between net airborne contamination produced by the traditional form of kiln used in Northern Mexico and by those modified according to a design by Dr. Robert Marquez. What has become known as the MK style kiln was intended to significantly reduce contaminant emissions. The concept involves covering the kiln with a dome and channeling the output of an active kiln through a second, identical loaded kiln for its additional filtration of the effluents. Kilns of a pair are connected via clay brick channels. The roles are reversed after the initial kiln is refilled. Significant reductions in the particulate and gaseous emissions were achieved in the prototype system, but a connectional problem with recent kiln pairs has also limited the degree of operational success. The problem did not mask the potential of the MK kiln, as will be shown. Additional anticipated benefits to the owners of MK kilns, such as reduced operating cycles and decreased quantities of fuel, also have been verified. Key measurements made during all of the burns were of aerosol densities and buoyancies in the flues, kiln temperatures, and, on a number of occasions, chemical analyses of both aerosol and gaseous effluents. Continuous time histories of aerosol densities for most burns (of a total of -40) provide a basis for examining features and the effects of differing styles of operation with respect to burn efficiency and net contaminant masses. Covering the active kiln with a dome produces a net reduction in dry aerosol effluent mass of a factor between 5 and 10, whereas the addition of a filter kiln produces a net reduction of about a factor of 2. The use of used motor oil as a fuel further reduced aerosol contamination by -1 order of magnitude.     

Evaluation of quicklime incorporation in bench-scale and full-scale lime stabilized biosolids using a flat surface pH electrode

Uniform lime incorporation into sewage sludge is critical for biosolid lime stabilization processes. There is no class B biosolids regulation for lime incorporation. The slurry method is currently used to evaluate the pH of limed biosolids, but this method homogenizes the biosolids and potentially masks poor lime mixing. In this study, a flat-surface pH electrode was used in bench-scale and full-scale experiments to measure the pH of lime-stabilized biosolids without creating slurries. The standard deviation of 15 pH measurements at different locations in a biosolid sample was used to assess mixing quality. The bench-scale experimental study showed that well-mixed limed biosolids had consistently high pHs (approximately 12) with low standard deviations (< 0.5 pH units), whereas poorly mixed biosolids had areas with low pH (< 10) and high standard deviations (> 2 pH units). Poorly mixed biosolids exhibited rapid and marked pH reduction, as well as offensive odor generation, whereas well-mixed biosolids resisted pH reduction and offensive odor generation. The full-scale study aimed at improving lime incorporation and biosolids quality confirmed the use of a flat surface pH electrode to capture low pH regions in biosolids that were masked by the current slurry method.     

The impact of synthetic pyrethroid and organophosphate sheep dip formulations on microbial activity in soil

Sheep dip formulations containing organophosphates (OPs) or synthetic pyrethroids (SPs) have been widely used in UK, and their spreading onto land has been identified as the most practical disposal method. In this study, the impact of two sheep dip formulations on the microbial activity of a soil was investigated over a 35-d incubation. Microbial utilisation of [1-(14)C] glucose, uptake of (14)C-activity into the microbial biomass and microbial numbers (CFUs g(-1) soil) were investigated. In control soils and soils amended with 0.01% sheep dip, after 7d a larger proportion of added glucose was allocated to microbial biomass rather than respired to CO(2). No clear temporal trends were found in soils amended with 0.1% and 1% sheep dips. Both sheep dip formulations at 0.1% and 1% concentrations resulted in a significant increase in CFUs g(-1) soil and [1-(14)C] glucose mineralisation rates, as well as a decline in microbial uptake of [1-(14)C] glucose, compared to control and 0.01% SP- or OP-amended soils. This study suggests that the growth, activity, physiological status and/or structure of soil microbial community may be affected by sheep dips.     

National Prevention through Design (PtD) Initiative

INTRODUCTION: The most effective means of preventing and controlling occupational injuries, illness, and fatalities is to "design out" hazards and hazardous exposures from the workplace. There is a long history of designing for safety for the general public and to a lesser degree for workers. METHOD: We now have the experience and insight from thoughtful, previous efforts to call for a comprehensive national strategy to implement a Prevention through Design (PtD) Initiative. RESULTS: This paper describes that initiative in terms of four overarching areas where action can be directed: practice, policy, research, and education. To obtain stakeholder input for issues in these four areas and to focus implementation efforts, eight sector divisions of the economy will be addressed. A seven year strategy is envisioned.     

Temporal characteristics from continuous measurements of PM2.5 and speciation at the Taipei Aerosol Supersite from 2002 to 2008

This study uses monitoring data collected at the Taipei Aerosol Supersite from March 2002 to February 2008 to analyze characteristics such as seasonal fluctuations, diurnal variations, and photochemical-related variations of PM_2.5 chemical compositions. The results indicate that the average of PM_2.5 mass concentration in Taipei during this period is 30.3 ± 16.0 μg m^?3. The highest average concentration of PM_2.5 components is that of sulfate, which accounts for 21.1% of the PM_2.5 mass, followed by organic carbon (OC) at 15.9%, nitrate at 5.8%, and elemental carbon (EC) at 5.4%. Concentrations of EC, OC, and nitrate have distinctive but similar seasonal fluctuations, which is highest in spring and lowest in fall. Sulfate concentration has less seasonal fluctuations, and the highest value appears during the fall. Similarly, concentrations of EC, OC, and nitrate have notable diurnal variations; however, the diurnal variation of sulfate concentration is not very apparent. These observation data show that EC, OC, and nitrate in PM_2.5 in the Taipei metropolis come mainly from local emissions, while sulfate comes mainly from the regional transport of pollutants. This is likely because Taiwan is located on the lee zone of the Asian prevailing winds from fall to spring; its air quality is frequently affected by the transport of air pollutants from Mainland China. In addition, the extent of increase in aerosols is much higher than that of CO, indicating the formation of secondary aerosol when photochemical activity is strong. Based on six years of observation data, this study explores three potential scenarios to set up Taiwan's PM_2.5 air quality standard (AQS). The analysis indicates that the optimum standard for 24-h air quality of PM_2.5 should be around 50 μg m^?3.     

Evaluation of non-enteric sources of non-methane volatile organic compound (NMVOC) emissions from dairies

Dairies are believed to be a major source of volatile organic compounds (VOC) in Central California, but few studies have characterized VOC emissions from these facilities. In this work, samples were collected from six sources of VOCs (Silage, Total Mixed Rations, Lagoons, Flushing Lanes, Open Lots and Bedding) at six dairies in Central California during 2006–2007 using emission isolation flux chambers and polished stainless steel canisters. Samples were analyzed by gas chromatography/mass spectrometry and gas chromatography/flame ionization detection. Forty-eight VOCs were identified and quantified in the samples, including alcohols, carbonyls, alkanes and aromatics. Silage and Total Mixed Rations are the dominant sources of VOCs tested, with ethanol as the major VOC present. Emissions from the remaining sources are two to three orders of magnitude smaller, with carbonyls and aromatics as the main components. The data suggest that animal feed rather than animal waste are the main source of non-enteric VOC emissions from dairies.     

Soil lead contamination at child day care centers in the greater Cincinnati area

Lead concentrations were determined for soil samples collected at 37 child day care centers located within the greater Cincinnati area. Soil samples were collected within 1.5 m of the exterior walls and throughout the remainder of the outdoor playgrounds of each of the child day care facilities. The soil lead concentrations were utilized as indicators of lead contamination from vehicle emissions and lead based paints. Mean lead concentrations were determined through Inductively Coupled Plasma-Mass Spectrometry. Soil lead concentrations were significantly higher within 1.5 m of the exterior walls than the rest of the outdoor play areas of the child day care centers (P < .05). There was a highly significant association between higher soil lead concentrations for child day care centers built prior to 1980 (P < .01). It was also found that a highly significant association exists between higher soil lead concentrations for child day care centers located within 2.5 km of the nearest interstate highway (P < .01). The findings of this research point to a clear need for concern about lead contamination at child day care centers and other facilities that large numbers of children frequent on a daily basis.     

Integrating drivers influencing the detection of plant pests carried in the international cut flower trade

This paper analyses the cut flower market as an example of an invasion pathway along which species of non-indigenous plant pests can travel to reach new areas. The paper examines the probability of pest detection by assessing information on pest detection and detection effort associated with the import of cut flowers. We test the link between the probability of plant pest arrivals, as a precursor to potential invasion, and volume of traded flowers using count data regression models. The analysis is applied to the UK import of specific genera of cut flowers from Kenya between 1996 and 2004.There is a link between pest detection and the Genus of cut flower imported. Hence, pest detection efforts should focus on identifying and targeting those imported plants with a high risk of carrying pest species. For most of the plants studied, efforts allocated to inspection have a significant influence on the probability of pest detection. However, by better targeting inspection efforts, it is shown that plant inspection effort could be reduced without increasing the risk of pest entry. Similarly, for most of the plants analysed, an increase in volume traded will not necessarily lead to an increase in the number of pests entering the UK. For some species, such as Carthamus and Veronica, the volume of flowers traded has a significant and positive impact on the likelihood of pest detection. We conclude that analysis at the rank of plant Genus is important both to understand the effectiveness of plant pest detection efforts and consequently to manage the risk of introduction of non-indigenous species.