Estimated occupational risk from bioaerosols generated during land application of class B biosolids

Some speculate that bioaerosols from land application of biosolids pose occupational risks, but few studies have assessed aerosolization of microorganisms from biosolids or estimated occupational risks of infection. This study investigated levels of microorganisms in air immediately downwind of land application operations and estimated occupational risks from aerosolized microorganisms. In all, more than 300 air samples were collected downwind of biosolids application sites at various locations within the United States. Coliform bacteria, coliphages, and heterotrophic plate count (HPC) bacteria were enumerated from air and biosolids at each site. Concentrations of coliforms relative to Salmonella and concentrations of coliphage relative to enteroviruses in biosolids were used, in conjunction with levels of coliforms and coliphages measured in air during this study, to estimate exposure to Salmonella and enteroviruses in air. The HPC bacteria were ubiquitous in air near land application sites whether or not biosolids were being applied, and concentrations were positively correlated to windspeed. Coliform bacteria were detected only when biosolids were being applied to land or loaded into land applicators. Coliphages were detected in few air samples, and only when biosolids were being loaded into land applicators. In general, environmental parameters had little impact on concentrations of microorganisms in air immediately downwind of land application. The method of land application was most correlated to aerosolization. From this large body of data, the occupational risk of infection from bioaerosols was estimated to be 0.78 to 2.1%/yr. Extraordinary exposure scenarios carried an estimated annual risk of infection of up to 34%, with viruses posing the greatest threat. Risks from aerosolized microorganisms at biosolids land application sites appear to be lower than those at wastewater treatment plants, based on previously reported literature.     

Analyzing the Impacts of Dams on Riparian Ecosystems: A Review of Research Strategies and Their Relevance to the Snake River Through Hells Canyon

River damming provides a dominant human impact on river environments worldwide, and while local impacts of reservoir flooding are immediate, subsequent ecological impacts downstream can be extensive. In this article, we assess seven research strategies for analyzing the impacts of dams and river flow regulation on riparian ecosystems. These include spatial comparisons of (1) upstream versus downstream reaches, (2) progressive downstream patterns, or (3) the dammed river versus an adjacent free-flowing or differently regulated river(s). Temporal comparisons consider (4) pre- versus post-dam, or (5) sequential post-dam conditions. However, spatial comparisons are complicated by the fact that dams are not randomly located, and temporal comparisons are commonly limited by sparse historic information. As a result, comparative approaches are often correlative and vulnerable to confounding factors. To complement these analyses, (6) flow or sediment modifications can be implemented to test causal associations. Finally, (7) process-based modeling represents a predictive approach incorporating hydrogeomorphic processes and their biological consequences. In a case study of Hells Canyon, the upstream versus downstream comparison is confounded by a dramatic geomorphic transition. Comparison of the multiple reaches below the dams should be useful, and the comparison of Snake River with the adjacent free-flowing Salmon River may provide the strongest spatial comparison. A pre- versus post-dam comparison would provide the most direct study approach, but pre-dam information is limited to historic reports and archival photographs. We conclude that multiple study approaches are essential to provide confident interpretations of ecological impacts downstream from dams, and propose a comprehensive study for Hells Canyon that integrates multiple research strategies.     

Fungicidal values of bio-oils and their lignin-rich fractions obtained from wood/bark fast pyrolysis

Pine wood, pine bark, oak wood and oak bark were pyrolyzed in an auger reactor. A total of 16 bio-oils or pyrolytic oils were generated at different temperatures and residence times. Two additional pine bio-oils were produced at the National Renewable Energy Laboratory in a fluidized-bed reactor at different temperatures. All these bio-oils were fractionated to obtain lignin-rich fractions which consist mainly of phenols and neutrals. The pyrolytic lignin-rich fractions were obtained by liquid-liquid extraction. Whole bio-oils and their lignin-rich fractions were studied as potential environmentally benign wood preservatives to replace metal-based CCA and copper systems that have raised environmental concerns. Each bio-oil and several lignin-rich fractions were tested for antifungal properties. Soil block tests were conducted using one brown-rot fungus (Gloeophyllum trabeum) and one white-rot fungus (Trametes versicolor). The lignin-rich fractions showed greater fungal inhibition than whole bio-oils for a impregnation solution 10% concentration level. Water repellence tests were also performed to study wood wafer swelling behavior before and after bio-oil and lignin-rich fraction treatments. In this case, bio-oil fractions did not exhibit higher water repellency than whole bio-oils. Comparison of raw bio-oils in soil block tests, with unleached wafers, at 10% and 25% bio-oil impregnation solution concentration levels showed excellent wood preservation properties at the 25% level. The good performance of raw bio-oils at higher loading levels suggests that fractionation to generate lignin-rich fractions is unnecessary. At this more effective 25% loading level in general, the raw bio-oils performed similarly. Prevention of leaching is critically important for both raw bio-oils and their fractions to provide decay resistance. Initial tests of a polymerization chemical to prevent leaching showed some success.     

Estimating waste transfer station delays using GPS

This paper examines the use of on-board global positioning system (GPS) data recorders as a method to collect field data on the movements of solid waste collection vehicles at transfer stations. The movements of five waste collection vehicles using four different transfer facilities were compared over a period of 1 year. The spatial data were analyzed using geofences to determine the amount of time each truck spent on each of four activities: queuing for access to the weigh scale, sitting on the weigh scale, queuing for access to the tipping floor, and unloading waste. The study found that queuing delays can be identified and measured using GPS data. The average time at a facility for all trucks was 16.4min per visit, with a standard deviation of 14.3min. Time at the facility ranged between 2 and 111min per visit and the distribution of time at the facility was positively skewed. Multi-compartment vehicles (co-collection and recycling trucks) spent significantly more time at unloading facilities. There were also significant differences in the length and the location of the queues at different facilities. At one facility, the longest delays were encountered while waiting for the weigh scale, at two facilities trucks experienced delays in obtaining access to the tipping floor, while at the fourth facility no significant delays developed.     

The use of the removable thin film coating technique as an alternative to traditional decontamination methods to mitigate and abate hazardous particulates

This article summarizes a study that evaluated a new decontamination technique for the mitigation and abatement of hazardous dust and particulates. Traditional decontamination methods are time‐consuming, expensive, can create airborne hazards, and do not always bring the concentration of the contaminant to acceptable levels. The use of the removable thin film coating will increase efficiency, will not generate airborne hazards, will decrease costs, and, with one application, will bring the hazardous dust concentrations to acceptable levels. Qualitative tests demonstrated that the removable thin film coating reduced the amount of visible luminescent dust (a surrogate for hazardous dust) from various surfaces. It also indicated that wherever there were minute scratches, the coating did not remove all of the dust. However, the qualitative tests showed that this decontamination method worked well as a preventative method, protecting clean areas from becoming contaminated when exposed to the luminescent dust. Further investigation was conducted using a scanning electron microscope (SEM) and carbon dust. Overall, the SEM experiment demonstrated that there was a statistically significant (p = 0.00007) removal of carbon dust (less than 10 μm in size) from surfaces with crevasses larger than 3 μm. The SEM also revealed that there were some limitations where there were large clusters of carbon dust; in these instances, the coating would tear and remain on the sample surface. One method to resolve this limitation involved adding Kevlar^TM fibers to the removable thin film coating. It was thought that this would increase the strength of the coating and eliminate the coating from tearing when removing large clusters of a contaminant. Unfortunately, this did not alleviate the issue. The use of an engineered textile, saturated with the coating, appeared to eliminate the problem with the coating not being able to remove the contaminant from the minute surface scratches and improved the removal process of the coating. © 2008 Wiley Periodicals, Inc.     

MULTI INCREMENT® TCE vadose‐zone investigation

MULTI INCREMENT® and discrete sampling strategies were used to estimate the average concentration and the three‐dimensional distribution of TCE in a 3,300‐m³ zone composed of two decision units (e.g., area of concern, population, exposure unit). Authors of this article and a private contractor (Stanley Consultants Inc.), respectively, implemented these two sampling strategies independently. Compared to discrete sampling, the MULTI INCREMENT sampling strategy identified more locations where percent‐level concentrations of TCE have migrated, is more economical, and provided greater data quality. © 2008 Wiley Periodicals, Inc.     

Lysimeter Experiments to Investigate the Fate of Chemicals in Soils – Comparison of Five Different Lysimeter Systems

Several lysimeter scenarios and approaches exist to study the fate of agro-chemicals or contaminants from deposition in soil columns. In many systems just transport and leaching of the parent compound is followed, in some systems the leaching and transport of the metabolites is investigated as well. In more sophisticated lysimeter systems the volatilization and also the mineralization of the applied chemicals can be additionally monitored. Depending on the lysimeter system used and on the fact whether the applied chemicals are ¹⁴C-labeled or not, different results and various interpretations of the results might be achieved. Different lysimeter systems are described in this paper and a real dataset of a specific lysimeter experiment was transferred and evaluated in a virtual approach in the different lysimeter systems in order to show the advantages and disadvantages of the various systems.     

Odor Control for Land Application of Lime Stabilized Biosolids

Over three million dry metric tons of biosolids produced in the United States are land applied as Class B. Lime stabilization is employed for biosolids treatment at approximately 20% of the wastewater treatment plants because it is a simple and inexpensive process. During lime stabilization, the pH of sewage sludge is raised above 12 for pathogen inactivation and odor reduction. Lime dose and mixing have been found to greatly reduce odor generation from lime stabilized biosolids. A better quality biosolids product is less likely to create public opposition to land application programs. In this study, land application tests using Class B biosolids were conducted in order to determine whether better mixing can reduce odor generation during the land application of lime stabilized biosolids. The mixing quality of a treatment plant’s lime stabilized biosolids was improved by relocating the lime addition point, which prolonged the mixing time and produced a better mixed biosolids product. Based on field observations of land application, the poorly mixed biosolids were more odorous and offensive prior to incorporation. However, once incorporated into the soil, there was no appreciable odor difference between the biosolids. Another land application study was conducted to assess the odor of unincorporated Class A biosolids and compare it with incorporated Class A biosolids with the soil.     

An Assessment of the Ecological Condition of Long Island Sound, 1990–1993

Data from the Environmental Protection Agency's (EPA) Environmental Monitoring and Assessment Program (EMAP) from 1990 to 1993 were used to assess the condition of the Long Island Sound (LIS) estuary. Ambient water, sediment and biota were collected during the summer months from 53 LIS stations using an unbiased sampling design. The design consists of two LIS subunits, LIS proper, and small estuaries (<2.6 km2) at the margins of the Sound. Selected indicators of condition included: benthic species composition, abundance and biomass; fish species composition and gross external pathology; sediment physical and chemical characterization and sediment toxicity; and water clarity and quality. Results of the four-year sampling indicated that 28(±11)% of the areal extent of LIS proper had a benthic index < zero (impacted) and 51(±12)% of the area of small estuaries was impacted. Analysis of the results of other indicators also shows that small estuaries were particularly affected. For example, 42(±10)% of the areal extent of small estuaries exhibited sediment toxicity, and significant chemical contamination was evident in 22% of the area of small estuaries. Low dissolved oxygen (D.O.) concentrations (<5 ppm), however, appeared to affect only the deeper open waters of western LIS. Approximately 48(±12)% of the areal extent of LIS proper documented exposure to at least moderate D.O. stress (<5 ppm). The overall results of this monitoring study indicate that significant anthropogenic impacts have occurred in LIS and that if remediation was to take place, specific localized sediment problems would need attention. Point source and non-point source nutrient inputs to the Sound, which are believed to be the primary causative factor for the observed hypoxic conditions, would also need attention.