Variation in ozone sensitivity among clones of Betula pendula and Betula pubescens

Forty clones of Betula pendula and 6 clones of Betula pubescens, originating from southern and central Finland, were ranked in order of ozone sensitivity according to visible injuries, growth and leaf senescense under low ozone exposure. The plants were fumigated in natural climatic conditions using an open-air exposure system during two growing seasons. Control plants were grown under ambient air, and the elevated-ozone exposures were 1.6x the ambient in 1994 and 1.7x the ambient in 1995. The differences in ozone sensitivity among clones were large. Ozone tolerance was related to thicker leaves and higher stomatal density as compared to sensitive clones. Ultrastructural ozone-induced symptoms were found in chloroplasts of sensitive clones. Increased number of visibly injured leaves on fumigated plants was correlated with reduced leaf formation, foliage area, shoot dry wt and number of stomata, and increased yellowing of leaves. The results suggest that a considerable proportion of birch trees, showing high sensitivity to ozone, are at risk if ambient ozone exposures increase.     

Airborne PCB as a contamination risk on freeze-drying of sediment

In a study of polychlorinated biphenyls (PCB) in freeze-dried sediments from Swedish lakes, the samples were found to contain unexpectedly high concentrations of PCBs. In one of the lakes (Bj?rken), e.g. the concentration of PCB-28 was found to be 189 ng/g dw after freeze-drying compared to 7 ng/g dw after air-drying of the sediment and therefore our hypothesis was that the contamination had occurred during the freeze-drying procedure. Hence, a dry reference sediment (RS) was used in order to identify potential sources of PCB contamination. The investigation included freeze-drying of the dry RS in five different laboratories, exposure to the air in the freeze-drying room, storage at room temperature and air-drying in a certain fume hood and in a laminar flow clean bench. The pattern and concentrations of PCBs detected in the exposed RS were strongly influenced by low chlorinated PCB congeners under all of these conditions with exception for air-drying in the fume hood. Storage in the laboratory air resulted in a slight elevation in the concentrations of low chlorinated PCB congeners, whereas higher concentrations of all PCB congeners were observed after freeze-drying. In all experiments the contamination appeared to be due to adsorption of PCB from the laboratory air. On the basis of these findings we recommend that reference material be subjected to the entire procedure, including sample preparation, in order to monitor contamination and that a procedure involving solvent extraction of wet sediment samples is used, whenever possible, instead of procedures involving dry samples.     

Fine particle (PM2.5) measurement methodology, quality assurance procedures, and pilot results of the EXPOLIS study

EXPOLIS is a European multicenter (Athens, Basel, Grenoble, Helsinki, Milan, and Prague) air pollution exposure study. It is the first international, population-based, large-scale study, where personal exposures to PM2.5 aerosol particles (together with volatile organic compounds and carbon monoxide) are being monitored. EXPOLIS is performed in six different centers across Europe, the sampled aerosol concentrations vary greatly, and the microenvironmental samples are not collected with the same equipment as the personal samples. Therefore careful equipment selection, methods development and testing, and thorough quality assurance and quality control (QA & QC) procedures are essential for producing reliable and comparable PM2.5 data. This paper introduces the equipment, the laboratory test results, the pilot results, the standard operating procedures, and the QA & QC procedures of EXPOLIS. Test results show good comparability and repeatability between personal and microenvironmental monitors for PM2.5 at different concentration levels measured across Europe in EXPOLIS centers.     

Antioxidant responses to simulated acid rain and heavy metal deposition in birch seedlings

This study measured the responses of different anti-oxidants in 2-year-old birch (Betula pendula Roth) seedlings subjected to simulated acid rain (pH 4.0) and heavy metals (Cu/Ni), applied alone or in combination for 2 months. The applied concentrations of pollutants did not significantly affect seedling biomass or total glutathione levels. Acid rain alone increased superoxide dismutase (SOD) activity both in leaves and roots, while heavy metals alone inhibited SOD activity in roots. Both acid rain and heavy metals applied singly increased ascorbate peroxidase (APX) and guaiacol peroxidase (GPX) activities in leaves but decreased activities in roots. In contrast, acid rain and heavy metal treatments increased glutathione reductase (GR) activity in roots but not in leaves. Spraying birch seedlings with a mixture of acid rain and heavy metals increased SOD, APX and GPX activities in leaves and GR activity in roots. However, the effects of mixed pollutants on enzyme activities usually were less than the summed effects of individual pollutants. Enzyme responses also depended on where pollutants were applied: spraying pollutants onto the shoots initiated higher responses in SOD, APX and GPX than did application to the soil surface, while the opposite was true for GR.     

First trimester diagnosis of Wolman's disease

Wolman's disease was diagnosed in the first trimester of pregnancy by the direct demonstration of acid lipase deficiency in chorionic villi. The diagnosis was confirmed by studies on cultured chorionic villus cells and fetal skin fibroblasts. Acid lipase activity was assayed with both 4-methylumbelliferyl-palmitate and radiolabelled cholesterol oleate as substrates. The higher specificity of the enzyme for the latter, natural, substrate makes it superior in prenatal diagnosis.     

Exposure of garbage truck drivers and maintenance personnel at a waste handling centre to polycyclic aromatic hydrocarbons derived from diesel exhaust

Exposure to diesel exhaust was evaluated in summer and winter by measuring vapour and particle phase polycyclic aromatic hydrocarbons (PAHs). Fifteen PAHs were simultaneously determined from the air samples obtained from truck drivers collecting household waste and maintenance personnel at a waste handling centre. The major compounds analysed from the personal air samples of exposed workers were naphthalene, phenanthrene and fluorene. The total PAH exposure (sum of 15 PAHs) of garbage truck drivers ranged from 71 to 2,660 ng m(-3) and from 68 to 900 ng m-3 in the maintenance work. The exposure of garbage truck drivers to benzo[a]pyrene (B[a]P) ranged from the mean of 0.03 to 0.3 ng m(-3) whereas no B[a]P in control samples or in those collected from maintenance workers was detected. A statistically significant difference in diesel-derived PAH exposure between the garbage truck drivers and the control group in both seasons (in summer p = 0.0022, degrees of freedom (df) 70.5; and in winter p < 0.0001, df = 80.4) was observed. Also, a significant difference in PAH exposure between the garbage truck drivers and the maintenance workers (in summer p < 0.0001, df = 50.1; and in winter p < 0.0001, df = 44.2) was obtained.     

Losses of nitrogen and phosphorus from agricultural and forest areas in Finland during the 1980s and 1990s

The temporal changes and spatial variability of phosphorus andnitrogen losses and concentrations in Finland during the period1981–1997 were studied in 15 small agricultural and forestedcatchments. In addition, four coastal river basins with highagricultural land use located in southern Finland were includedin the study in order to assess the representativeness ofagricultural loss estimates from small agricultural catchments.The mean annual loss specific for agricultural land was estimatedto be on average 110 kg km^-2 a^-1 for total phosphorusand 1500 kg km^-2 a^-1 for total nitrogen. The resultsfrom small agricultural catchments were in agreement with thecorresponding loss estimates from rivers, with an average of137 kg km^-2 a^-1 for total phosphorus and 1800 kg km^-2a^-1 for total nitrogen. The results from the studiedagricultural catchments and rivers during the period 1981–1997suggest that weather-driven fluctuation in discharge was usuallythe main reason for changes in nutrient losses, and little or noimpact of changes in agricultural production or managementpractises can be observed. In forested areas the total phosphorusloss (average 9 kg km^-2 a^-1) and total nitrogen loss(average 250 kg km^-2 a^-1) were lower than inagricultural areas. In forested catchments the impact of forestryoperations, such as clear-cutting and fertilization, and theimpact of atmospheric nitrogen deposition can be seen in changesin nutrient losses.     

A method for facilitating the use of algae growing on tree trunks as bioindicators of air quality

The abundance of epiphytic green algae has been observed to correlate strongly with air quality in several studies. In contrast to lichens, the abundance of green algae is difficult to measure accurately by visual observation. A new method based on photography and digital image processing was developed to estimate the chlorophyll content of algae growing on the bark of pine. Calibration data for the method was collected from polluted areas by spectrophotometric analysis of chlorophyll density.     

Exposure to airborne isocyanates and other thermal degradation products at polyurethane-processing workplaces

The thermal degradation products of polyurethanes (PURs) and exposure to isocyanates were studied by stationary and personal measurements in five different occupational environments. Isocyanates were collected on glass fibre filters impregnated with 1-(2-methoxyphenyl)piperazine (2MP) and in impingers containing n-dibutylamine (DBA) in toluene. connected to a glass fibre postfilter. The derivatives formed were analysed by liquid chromatography: 2MP derivatives with UV and electrochemical detection and DBA derivatives with mass spectrometric detection. The release of aldehydes and other volatile organic compounds into the air was also studied. In a comparison of the two sampling methods, the 2MP method yielded about 20% lower concentrations for 4,4'-methylenediphenyl diisocyanate (MDI) than did the DBA method. In car repair shops, the median concentration of diisocyanates (given as NCO groups) in the breathing zone was 1.1 microg NCO m(-3) during grinding and 0.3 microg NCO m(-3) during welding, with highest concentrations of 1.7 and 16 pg NCO m(-3), respectively. High concentrations of MDI, up to 25 and 19 microg NCO m(-3), respectively, were also measured in the breathing zone during welding of district heating pipes and turning of a PUR-coated metal cylinder. During installation of PUR-coated floor covering, small amounts of aliphatic diisocyanates were detected in the air. A small-molecular monoisocyanate, methyl isocyanate, and isocyanic acid were detected only during welding and turning operations. The diisocyanate concentrations were in general higher near the emission source than in the workers' breathing zone. A sampling strategy to evaluate the risk of exposure to isocyanates is presented.     

The effect of wind direction on the observed size distribution of particle adsorbed polycyclic aromatic hydrocarbons on an inner city sampling site

An investigation of the variability in the size distribution of particle adsorbed polycyclic aromatic hydrocarbons (PAHs) on an inner city sampling site showed differences depending on the wind direction. Particle size distributions of PAHs from outdoor air sampling were measured in Munich from 1994 to 1997. The sampling site is located northeast of a crossing with heavy traffic and southwest of a large inner city park. Depending on the wind direction, three different size distributions of particle adsorbed PAHs were observed. The maximum PAH concentration on very small particles (geometric mean diameter 75 nm) was observed with wind from west to southwest coming directly from the crossing area or the roads with heavy traffic. The maximum PAH concentration on particles with geometric mean diameter of 260 nm was found on days with wind from the built-up area north of the sampling site. On particles with geometric mean diameter of 920 nm the maximum PAH concentration was found on days with main wind directions from northeast to east. On these days the wind is blowing from the direction of the city park nearby. The distribution of particle adsorbed PAHs within different particle size classes is substantially influenced by the distance of the sampling site from strong sources of PAH loaded particulate matter.