Possible cause of inhibition of seed germination in two rice cultivars by heavy metals Pb2+ and Hg2+

Seeds of two rice cultivars (Oryza sativa) cv. PR-116 and Pant Dhan-12 subjected to heavy metal lead (Pb²⁺) and mercury (Hg²⁺) exposure showed an inhibition in germination percentage, shoot and root length, and lower fresh and dry weight after 7 days. Both Pb²⁺ and Hg²⁺ inhibited the solubilization process of starch due to reduction in α-amylase activity, which is also evident from greater starch content and reduced soluble carbohydrate content of endosperms of treated seeds of the two cultivars. Mercury was more tolerated by Pant Dhan-12 when grown under in vitro culture medium containing 2% sucrose. The inhibitory effect of Pb²⁺ on embryo growth was not only abolished but also accelerated by 2% sucrose. The inhibitory effect, however, was not significantly blocked in Hg²⁺-treated embryos grown in vitro in sucrose containing medium. Embryos did not grow normally in a medium devoid of sucrose in either case. Data indicated that Pb²⁺ inhibited germination and seedling growth by impairing the solubilization of endosperm starch without markedly affecting the embryo, while Hg²⁺ inhibited germination and seedling growth by damaging the embryo itself.     

Synthesis of chlorinated dibenzofurans and chlorinated amino-dibenzofurans from the corresponding diphenyl ethers and nitro-diphenylethers

The synthesis of five chlorinated dibenzofurans and three chlorinated animodibenzofurans from easily available diphenyl ethers is described. Also reported is the preparation of the diphenyl ethers. The ¹H-NMR and mass spectra data for the compounds are also reported.     

Investigating mechanical properties and durability of concrete containing recycled rubber ash and fibers

This article investigates the suitability of utilizing end of life rubber tyre particles in concrete as fine aggregate. Rubber ash and rubber fibers were used to develop two series of rubber ash concrete (series I) and hybrid concrete (series II) mixes. The natural fine aggregate was replaced by rubber ash (by volume of 5%, 10%, 15% and 20%) in series I; whereas in series II, the amount of rubber ash was kept constant at 10% and rubber fiber was introduced as replacement of fine aggregate (by volume of 5%, 10%, 15%, 20% and 25%). The concrete mixes were evaluated for compressive strength, flexural strength, resistance to impact loading, fatigue loading, water penetration and shrinkage strain was evaluated. It was observed that inclusion of rubber ash resulted in the improvement of impact resistance of concrete. The results also show that up to 10% rubber ash and rubber fibers can be utilized as fine aggregate to develop feasible and durable rubberized concrete pavements, crash barriers and paver blocks.

     

Bioaccumulation of nutrient elements from fly ash-amended soil in Jatropha curcas L.: a biofuel crop

Fly ash (FA) from coal-burning industries may be a potential inorganic soil amendment; the insight of its nutrient release and supply to soil may enhance their agricultural use. The study was conducted to assess the ability of fly ash (a coal fired thermal plant waste) to reduce soil fertility depletion and to study bioaccumulation of mineral nutrients in Jatropha curcas grown on soils amended with fly ash. Fly ash was amended to field soil at six rates (0, 5, 10, 20, 40, and 70 % w/w) on which J. curcas was grown. After 8 months of growth, the height of jatropha plants was significantly increased at 5 and 10 % FA-amended soil, whereas, biomass significantly increased at 5, 10, and 20 % FA-amended soil compared to control soil (0 % FA). Leaf nutrients uptake, followed by stems and roots uptake were highly affected by fly ash amendment to soil. Most of nutrients accumulation were increased up to 20 % fly ash and decreased thereafter. The results of available nutrient analysis of soil revealed that availability of nitrogen, potassium, sulfur, copper, iron, mangnese, and zinc declined significantly at higher levels of fly ash amendments, whereas, availability of phosphorus increased at these levels. However, pH, organic carbon, and available boron were not influenced significantly by fly ash amendment to soil. Microbial biomass C, N, and ratio of microbial-C to organic C were significantly reduced at 20 % fly ash and higher amounts. This study revealed that J. curcas plants could gainfully utilize the nutrients available in fly ash by subsequently amending soil.     

The regeneration and recycle of chromium etching solutions using concentrator cell membrane technology

The regeneration of chromium (VI) and the recovery of etched copper from chromium etching solutions by electrodialysis is improved by the addition of a concentrator cell in the catholyte chamber. The concentrator media used are ion-exchange resins or activated carbon cloth. The maximum percentages for the regeneration of chromium and recovery of copper in these systems is however less than 80% and 90% respectively because of the competition between the processes of oxidation of Cr(III) and electrodeposition of copper. A novel combination of electrolysis with electrodialysis and concentrator cell technology is developed that achieves 92% chromium regeneration and 90% copper recovery.     

Blood lead level in the children of western Uttar Pradesh,India

The objective of this study was to determine the blood lead levels (blls) of children under an age of 5 years living in western Uttar Pradesh, India. A total of 100 blood samples, 100 drinking water samples, and 21 vegetable samples were assessed for lead contamination. Blood levels in the range of 30–116?µg?L^?1 were observed at Kazipur village. The levels of lead in water samples were reported to be in the range of 0.006–0.095?ppm and identified at up to 9.5 times the stated permissible limit. A significant positive correlation (+0.679) was obtained between blls and water lead levels. All vegetable samples were also contaminated with lead up to 12 times higher than the permissible limit of 2.5?mg?kg^?1 of Prevention of Food Adulteration Act (PFA) 1954. The cottage lead battery industry, industrial effluents, and lead paints were identified as possible factors for lead incidence in the study area. Lead may be associated with increased antisocial activities of the children living in western Uttar Pradesh. Children with elevated blls had poorer nutritional status than those with normal levels, and parents did not know that lead causes health problems. A national population-based study is recommended to determine the prevalence of elevated blls.     

Risk assessment of children's blood lead level in some rural habitations of western Uttar Pradesh,India

The objective of this study was to determine the blood lead level (BLL) of children aged under 5 living in western Uttar Pradesh, India. A total of 100 blood samples, 100 drinking water samples, and 21 vegetable samples were assessed for lead (Pb) contamination. BLL was observed in the range of 3–11.58?µg?dL^?1 with a maximal level of 11.58?±?0.05?µg?dL^?1 in Kazipur village. Lead in water samples was detected in the range of 0.006–0.095?ppm and identified at upto 9.5-fold higher than the stated permissible limit. A significant positive correlation (+0.679) was obtained between BLL and water Pb levels. All vegetable samples were also contaminated with Pb upto 12-fold higher than the permissible limit of 2.5?µg?g^?1 of Prevention of Food Adulteration Act (PFA) 1954. Untreated industrial effluents were identified as the responsible factors for Pb occurrence in the study area. The presence of lead may be associated with the increased antisocial activities of children living in western Uttar Pradesh. Children with elevated BLL had poorer nutritional status than those with background Pb levels. There is an urgent need for a national campaign to monitor the BLL of children in India.     

Predictive models of safety belt use: a regression analysis of MVOSS data

A substantial portion of the U.S. population fails to regularly use their safety belts. The explanations for the differential belt use have addressed, for example, socioeconomics, state law, attitudes, and perceived likelihood of being ticketed. The current analyses create predictive models of safety belt use. Using NHTSA's Motor Vehicle Occupant Safety Surveys (Years 1998 and 2000; N = 9577), variables related to belt use were entered into backward stepwise logistic regressions to produce two predictive models (Demographic and Attitudinal) of safety belt use (Always versus Not always). The results indicated that belt use is a complicated issue as there were several interactions between variables. The Demographic predictive model contained main effects for, law types, socioeconomics, population density, a gender-law type interaction, and a three-way interaction between age, marital status, and vehicle type. The Attitudinal model included perceived effectiveness of the belt, fatalistic attitudes, and an interaction between perceived effectiveness of the belt and perceived risk of being ticketed. These models survived a multinomial logistic regression when belt use was parsed into three categories (Always, Part-time, and Infrequent). In addition to variables that affect belt use, the results suggested that the structure of "belt use" as a psychological/behavioral construct is more complicated than once thought. Specifically, a dichotomous breakdown of belt use (Always and Not always) oversimplifies the construct because the predictor factors sometimes affect "part-time" belt users differently than "infrequent" belt users (compared to "full-time" users). Many of the factors included in the models have been previously shown to impact belt use, but the interaction effects--indicating a more complicated relationship between these variables than previously suggested--may contribute to a better understanding of safety belt use.     

Evaluation of leaching characteristics and environmental compatibility of solidified/stabilized industrial waste

An attempt was made to judge the environmental compatibility, the governing leaching mechanism, and mobility patterns in a waste–cement solidified/stabilized matrix after 21 days of curing. The mixed sludge from a steel pickling facility was stabilized by ordinary Portland cement. Iron was the major leachable metal, along with Pb, Zn, and Mn. To characterize the leaching behavior, the mobility and mechanism of leaching were determined by diffusion leaching tests. In the solidified/stabilized matrix, the mobility of all the elements studied was reduced, and average to low mobility was observed. Values for the negative log of the effective diffusion coefficient of more than 12.5 were obtained for the metals. The dominant leaching mechanisms were surface wash off in the initial stage, followed by diffusion. The environmental performance of the solidified/stabilized product when considered in terms of mass leached over 64 days was found to be satisfactory for consideration for the safe disposal and reuse of waste.