中国火山地区预警政策研究

本文主要介绍了我国的活火山、火山灾害情况及国内外的火山预警政策。在此基础上讨论了我国火山地区预警政策的组成结构,认为完整的火山地区预警政策应该包括活火山识别、火山风险评价与灾害区划图、制定火山应急预案、火山防灾减灾知识宣传、火山监测和灾害预报、火山灾害预警等级划分、火山减灾工程措施以及预警响应措施等方面,并对火山预警政...     

基于析因设计的多种重金属对发光菌联合毒性研究

文章采用析因设计的方法,研究沉积物水浸提液掺杂的多种重金属Cu、Cd、Zn、Pb和Ni对发光菌的联合毒性。通过对试验结果进行方差分析和多元线性回归,建立了重金属浓度和发光菌发光抑制率的关系模型:T=97.983Cu+41.111Cd-27.297Zn+129.869Pb+16.715Ni-5 803.639Cu*Cd+2 270.182Cd*Zn-6 411.870Cd*Pb-675.052Cd*Ni-3 108.544Pb*Ni+15 9552.434Cd*Pb*Ni+274 718.434Zn*Pb*Ni。模型分析结果表明:Zn对联合毒性产生负的影响,Cu、Cd、Pb、Ni对联合毒性具有正的贡献;Cd*Zn二元交互作用和Cd*Pb*Ni、Zn*Pb*Ni三元交互作用表现为协同作用,Cu*Cd、Cd*Pb、Cd*Ni、Pb*Ni二元交互作用表现为拮抗作用,而重金属四元和五元交互作用对联合毒性的贡献不显著。上述重金属联合毒性的作用可为沉积物中重金属复合污染控制提供参考。     

工业用煤气燃烧装置二氧化硫减排方式的讨论

工业用煤气是工业生产中普遍采用的气体燃料,煤气燃烧过程会产生二氧化硫,减少煤气燃烧过程的二氧化硫排放可采用煤气脱硫和烟气脱硫两种方式。本文通过对煤气脱硫工艺及烟气脱硫工艺原理及参数进行对比的方式,讨论工业用燃气燃烧装置的两种二氧化硫减排方式的优缺点,为该类装置脱硫设计提供参考。     

Dimensional analysis and scaling in mechanical mixing for fabrication of metal matrix nanocomposites

For a successful enhancement of mechanical properties of metal matrix nanocomposites, a homogeneous nanoparticle dispersion and distribution in the solidified metal is required. Mechanical mixing can be used for initial break-up of agglomerates, and its study can be simplified with dimensional analysis. Using this technique, mixing time and vortex height were assessed while varying fluid properties, impeller angle, and angular speed. Three relevant dimensionless numbers were recognized: the Reynolds (Re), Froude and Galilei (Ga) numbers. Based on blade and impeller shaft angles, a modified Froude number (Fr*) was defined. These parameters were calculated experimentally, varying angular speed from 200 to 1000 rpm for three different impeller angles: 0°, 15° and 30°. This procedure was performed with three fluids: water, and two aqueous glycerin solutions (25% and 50% by volume). Digital images were taken and processed to measure vortex height. Mixing time was measured for water at 0° impeller angle, angular speed ranging from 200 to 1200 rpm. Results showed an optimal dimensionless mixing time with respect to Re. A linear relationship was found between dimensionless vortex height and Fr*. The first had a second order polynomial relationship with the product ReFr*, regardless of impeller angle. This relationship, together with the Ga, specific for each fluid, allows scaling the results to other fluids such as molten pure aluminum. This study allows experimenting in simpler systems that involve transparent fluids, room temperature and low cost, to then elaborate a prediction of vortex height in fluids where measurements are difficult and costly, such as molten metals.     

Smooth surface fabrication in mask projection based stereolithography

The surface finish is critical for applications such as optics, micro-fluid flow and mechanical assembly, in which optical lenses, fluidic channels and rotating components are all required to be smooth. However, the stair-stepping effect is well known in the layer-based additive manufacturing processes, in which a three-dimensional model is approximated by a set of two-dimensional layers. Consequently the fabricated surfaces have poor surface finishes especially those that are close to the horizontal plane. In this paper, a novel approach for achieving improved surface finish is presented for the mask-image-projection-based stereolithography (MIP-SL) process. Theoretical models and parameter characterization are presented for the developed methods. Accordingly, the process planning and calibration approaches for fabricating smooth up-facing surfaces in the MIP-SL process have been developed. Multiple test cases based on various types of curved surfaces have been performed. A comparison of the build results based on the traditional and the newly developed approaches illustrates the effectiveness of our method.     

东大别地区重大地震事件深部地壳结构特征

本文应用东大别地区层析成像研究结果,对研究区重大地震事件的深部地壳结构特征进行了研究,结果表明：霍山地区的2次MS≥6.0级地震在深部地壳结构上具有一定的相似性;1970年以来的12次MS≥4.0地震在25 km深度的地壳速度结构特征比较接近。     

Does safety climate moderate the influence of staffing adequacy and work conditions on nurse injuries?

PROBLEM: Hospital nurses have one of the highest work-related injury rates in the United States. Yet, approaches to improving employee safety have generally focused on attempts to modify individual behavior through enforced compliance with safety rules and mandatory participation in safety training. We examined a theoretical model that investigated the impact on nurse injuries (back injuries and needlesticks) of critical structural variables (staffing adequacy, work engagement, and work conditions) and further tested whether safety climate moderated these effects. METHOD: A longitudinal, non-experimental, organizational study, conducted in 281 medical-surgical units in 143 general acute care hospitals in the United States. RESULTS: Work engagement and work conditions were positively related to safety climate, but not directly to nurse back injuries or needlesticks. Safety climate moderated the relationship between work engagement and needlesticks, while safety climate moderated the effect of work conditions on both needlesticks and back injuries, although in unexpected ways. DISCUSSION AND IMPACT ON INDUSTRY: Our findings suggest that positive work engagement and work conditions contribute to enhanced safety climate and can reduce nurse injuries.