潜流人工湿地填料筛选及其对小城镇微污染水的修复性能评价

为了选择适合小城镇潜流人工湿地的填料,选取小城镇较为常见的材料(废砖、卵石、碎石),结合物化性质,研究25℃下填料对磷的吸附效果,并分析了填料种类对野外潜流人工湿地运行的影响。结果表明:(1)25℃时,3种填料对磷的吸附量随着溶液中初始磷浓度的增加而增加,吸附能力依次为废砖>碎石>卵石;(2)野外潜流人工湿地运行过程中,随HRT的延长,组合填料湿地WL1和废砖填料WL2湿地对总磷的净化效果有所提高,且WL2湿地对总磷的去除效果略优于WL1。因此,可以选择废砖作为小城镇潜流人工湿地系统的填料。     

中国火山地区预警政策研究

本文主要介绍了我国的活火山、火山灾害情况及国内外的火山预警政策。在此基础上讨论了我国火山地区预警政策的组成结构,认为完整的火山地区预警政策应该包括活火山识别、火山风险评价与灾害区划图、制定火山应急预案、火山防灾减灾知识宣传、火山监测和灾害预报、火山灾害预警等级划分、火山减灾工程措施以及预警响应措施等方面,并对火山预警政...     

基于析因设计的多种重金属对发光菌联合毒性研究

文章采用析因设计的方法,研究沉积物水浸提液掺杂的多种重金属Cu、Cd、Zn、Pb和Ni对发光菌的联合毒性。通过对试验结果进行方差分析和多元线性回归,建立了重金属浓度和发光菌发光抑制率的关系模型:T=97.983Cu+41.111Cd-27.297Zn+129.869Pb+16.715Ni-5 803.639Cu*Cd+2 270.182Cd*Zn-6 411.870Cd*Pb-675.052Cd*Ni-3 108.544Pb*Ni+15 9552.434Cd*Pb*Ni+274 718.434Zn*Pb*Ni。模型分析结果表明:Zn对联合毒性产生负的影响,Cu、Cd、Pb、Ni对联合毒性具有正的贡献;Cd*Zn二元交互作用和Cd*Pb*Ni、Zn*Pb*Ni三元交互作用表现为协同作用,Cu*Cd、Cd*Pb、Cd*Ni、Pb*Ni二元交互作用表现为拮抗作用,而重金属四元和五元交互作用对联合毒性的贡献不显著。上述重金属联合毒性的作用可为沉积物中重金属复合污染控制提供参考。     

淮南塌陷区煤矸石充填复垦的碳减排效益

煤矸石由于其堆积物的高含碳量和高自燃风险,是一类巨大的碳排放源,其温室气体排放问题不容忽视,但是很少有人研究煤矸石和碳排放的关系。本文以淮南矿区塌陷区煤矸石充填复垦为例,计算了煤矸石堆存带来的潜在碳排放量、矸石山侵占土地生态系统碳储量变化及塌陷区生态系统碳储量变化。结果表明,淮南矿区煤矸石山堆存碳密度远远超过了其覆盖的当地原本自然生态系统碳储存密度,二氧化碳排放潜在风险很高。煤矸石充填复垦,能固定煤矸石中的大量的碳,还可以增加塌陷区生态系统的碳储量,有着很好的碳减排效益。     

纳氏试剂分光光度法测定水质氨氮不确定度的评估

本文对采用纳氏试剂分光光度法（HJ535-2009）测定水中氨氮的实验过程可能引入的各不确定分量的来源进行了详细的分析,然后对各分量进行评定,对测定不确定度做出评估。得出影响测定结果的几种重要因素。     

工业用煤气燃烧装置二氧化硫减排方式的讨论

工业用煤气是工业生产中普遍采用的气体燃料,煤气燃烧过程会产生二氧化硫,减少煤气燃烧过程的二氧化硫排放可采用煤气脱硫和烟气脱硫两种方式。本文通过对煤气脱硫工艺及烟气脱硫工艺原理及参数进行对比的方式,讨论工业用燃气燃烧装置的两种二氧化硫减排方式的优缺点,为该类装置脱硫设计提供参考。     

Dimensional analysis and scaling in mechanical mixing for fabrication of metal matrix nanocomposites

For a successful enhancement of mechanical properties of metal matrix nanocomposites, a homogeneous nanoparticle dispersion and distribution in the solidified metal is required. Mechanical mixing can be used for initial break-up of agglomerates, and its study can be simplified with dimensional analysis. Using this technique, mixing time and vortex height were assessed while varying fluid properties, impeller angle, and angular speed. Three relevant dimensionless numbers were recognized: the Reynolds (Re), Froude and Galilei (Ga) numbers. Based on blade and impeller shaft angles, a modified Froude number (Fr*) was defined. These parameters were calculated experimentally, varying angular speed from 200 to 1000 rpm for three different impeller angles: 0°, 15° and 30°. This procedure was performed with three fluids: water, and two aqueous glycerin solutions (25% and 50% by volume). Digital images were taken and processed to measure vortex height. Mixing time was measured for water at 0° impeller angle, angular speed ranging from 200 to 1200 rpm. Results showed an optimal dimensionless mixing time with respect to Re. A linear relationship was found between dimensionless vortex height and Fr*. The first had a second order polynomial relationship with the product ReFr*, regardless of impeller angle. This relationship, together with the Ga, specific for each fluid, allows scaling the results to other fluids such as molten pure aluminum. This study allows experimenting in simpler systems that involve transparent fluids, room temperature and low cost, to then elaborate a prediction of vortex height in fluids where measurements are difficult and costly, such as molten metals.