超高效气溶胶净化系统有效性现场检验研究

各类超高效气溶胶净化系统普遍存在的较为突出的问题是:缺乏系统工作有效性现场检测手段,难以判断系统防护是否失效。根据超高效滤料过滤特性和测试原理,并在分析了大气气溶胶对过滤效率测试影响的基础上,提出大气气溶胶背景下,基于粒数浓度测量和使用发生的高浓度单分散气溶胶作为实验气溶胶的净化系统防护有效性现场检验测试技术及系统组成,并进行了验证。     

好氧活性污泥中自养硝化细菌分离方法研究

分别采用琼脂平板、琼脂糖平板、水洗洋菜平板和硅胶平板分离培养城市污水处理厂好氧活性污泥中的硝化细菌。在相同的培养条件下,琼脂平板和水洗洋菜平板有杂菌生长;硅胶平板制作过程繁琐,培养后期出现失水性干裂;琼脂糖平板没有杂菌生长。通过对分离菌株的表观形态观察和NorB基因检测鉴定分离菌株,证明琼脂糖分离出了目的菌株,适合生长周期长的自养硝化细菌分离培养。     

聚铁混凝-臭氧-BAF对晚期垃圾渗滤液深度处理的研究

联合运用聚铁混凝-臭氧-曝气生物滤池(BAF)对晚期垃圾场的渗滤液进行深度处理。在废水进水COD=601mg/L,色度=400倍时,提出最佳工艺条件:聚铁0.6 mL/L,臭氧用量144 mg/L,BAF停留时间7 h。研究表明,聚铁去除大部分悬浮性有机物,臭氧降解难生物降解有机物并提高废水的可生化性,BAF进一步降解有机物,最终出水COD为75 mg/L,深度处理成本仅为5.5元/t。     

超声吹脱去除氨氮的机理和动力学研究

采用超声吹脱技术对某印染厂印染废水中的氨氮进行了处理实验,探索了其反应机理并进行了动力学研究。研究表明,叔丁醇的存在没有降低废水中氨氮的去除率,证明.OH不是超声吹脱去除氨氮反应中的主导氧化物种。通过对反应产物的分析发现,超声吹脱去除氨氮的机理主要是氨氮以游离态的方式在空化效应下高温高压热解成氮气和氢气排出,同时氨气在空化效应产生的超临界状态下传质速度加快,在吹脱条件下更易于从废水中散失。动力学分析表明,印染废水中氨氮的超声去除反应属于一级反应,符合一级反应动力学。     

湿式纤维层非稳态过滤净化阻力的研究

在干式纤维层过滤净化阻力的理论基础上,提出清洗水均匀分布于纤维丝表面的基本假设,使湿式过滤中对液滴、液膜、液珠的分析简单具体化。并通过实验结论归纳出净化阻力随时间的变化规律,导出湿式纤维层非稳态过滤净化阻力的表达式,并用实验验证了其准确性。     

溶剂热法合成SnWO_4及其可见光催化活性

采用溶剂热法合成了新型的可见光催化剂SnWO4,以甲基橙为目标污染物,考察了合成温度、合成时间和煅烧工艺对催化剂可见光催化活性的影响。实验结果表明:煅烧工艺会明显降低催化剂的光催化活性;在合成温度为180℃、合成时间为8h、未煅烧的条件下,合成的催化剂的光催化效果最好,光照90min后,对甲基橙的降解率可达99.93%。     

固定化白腐真菌反应器与接触氧化反应器联用处理癸二酸生产废水

采用固定化白腐真菌(WRF)反应器与接触氧化反应器联用处理癸二酸废水。在WRF反应器中,以汽曝玉米秸秆为载体,并添加铜、铁促进白腐真菌生长和产酶作用,载体的使用寿命约为45 d。在进水苯酚平均质量浓度为69.36 mg/L、平均进水COD为1 648.81 mg/L的条件下,经WRF反应器处理后,苯酚平均质量浓度降至7.59 mg/L,平均出水COD降至478.03 mg/L;再经接触氧化反应器处理后,苯酚平均质量浓度降至1.65 mg/L,平均出水COD降至297.31 mg/L。     

Comprehensive assessment of toxic metals in urban and suburban street deposited sediments (SDSs) in the biggest metropolitan area of China

A set of toxic metals, i.e. As, Hg, Pb, Cd, Cu, Zn, Ni and Cr, in urban and suburban SDSs were investigated comparatively in the biggest metropolitan area of China, Shanghai. Results showed that all of the metals except As were accumulated greatly, much higher than background values. Geo-accumulation index indicated that metal contamination in urban SDSs was generally heavier than that in suburban SDSs. Potential ecological risk index demonstrated that overall risks caused by metals were considerable. Cd contributed 52% to the overall risk. Multivariate statistical analysis revealed that in urban SDSs, Zn, Ni, Cd, Pb, Cu and Cr were related to traffic and industry; coal combustion led to elevated levels of Hg; soil parent materials controlled As contents. In suburban SDSs, Pb, Cu, As and Cd largely originated from traffic pollution; Zn, Ni and Cr were associated with industrial contaminants; Hg was mainly from domestic solid waste.     

Tracking nitrogen losses in a greenhouse crop rotation experiment in North China using the EU-Rotate_N simulation model

Vegetable production in China is associated with high inputs of nitrogen, posing a risk of losses to the environment. Organic matter mineralisation is a considerable source of nitrogen (N) which is hard to quantify. In a two-year greenhouse cucumber experiment with different N treatments in North China, non-observed pathways of the N cycle were estimated using the EU-Rotate_N simulation model. EU-Rotate_N was calibrated against crop dry matter and soil moisture data to predict crop N uptake, soil mineral N contents, N mineralisation and N loss. Crop N uptake (Modelling Efficiencies (ME) between 0.80 and 0.92) and soil mineral N contents in different soil layers (ME between 0.24 and 0.74) were satisfactorily simulated by the model for all N treatments except for the traditional N management. The model predicted high N mineralisation rates and N leaching losses, suggesting that previously published estimates of N leaching for these production systems strongly underestimated the mineralisation of N from organic matter.     

Determination of antibiotics in sewage from hospitals, nursery and slaughter house, wastewater treatment plant and source water in Chongqing region of Three Gorge Reservoir in China

Sewage samples from 4 hospitals, 1 nursery, 1 slaughter house, 1 wastewater treatment plant and 5 source water samples of Chongqing region of Three Gorge Reservoir were analyzed for macrolide, lincosamide, trimethoprim, fluorouinolone, sulfonamide and tetracycline antibiotics by online solid-phase extraction and liquid chromatography-tandem mass spectrometry. Results showed that the concentration of ofloxacin (OFX) in hospital was the highest among all water environments ranged from 1.660 μg/L to 4.240 μg/L and norfloxacin (NOR, 0.136-1.620 μg/L), ciproflaxacin (CIP, ranged from 0.011 μg/L to 0.136 μg/L), trimethoprim (TMP, 0.061-0.174 μg/L) were commonly detected. Removal range of antibiotics in the wastewater treatment plant was 18-100% and the removal ratio of tylosin, oxytetracycline and tetracycline were 100%. Relatively higher removal efficiencies were observed for tylosin (TYL), oxytetracycline (OXY) and tetracycline (TET)(100%), while lower removal efficiencies were observed for Trimethoprim (TMP, 1%), Epi-iso-chlorotetracycline (EICIC, 18%) and Erythromycin-H₂O (ERY-H₂O, 24%). Antibiotics were removed more efficiently in primary treatment compared with those in secondary treatment.