重金属Cr(Ⅵ)、Pb及Cu胁迫对双齿围沙蚕体腔细胞的DNA损伤

为探讨重金属Cr(Ⅵ)、Pb以及Cu对沙蚕体腔细胞DNA的毒性效应,以双齿围沙蚕为受试动物,重金属按不同剂量水平,Cr(Ⅵ):10、100和200 mg· L-1,Pb:5、50和100 mg·L-1,Cu:1、10和20 mg· L-1,分别胁迫沙蚕24 h,以不加任何重金属离子的海水为对照,采用单细胞凝胶电泳技术,检测其体腔细胞DNA损伤程度.结果表明,与空白对照组相比,3种重金属离子的各浓度组都能引起沙蚕体腔细胞DNA损伤,且3种重金属胁迫浓度与细胞DNA损伤程度之间存在显著的剂量-效应关系.双齿围沙蚕可以作为单细胞凝胶电泳的实验材料用于重金属所致环境污染的生物监测指示生物.     

农药致慢性细胞毒性及基因毒性机制研究进展

大量流行病学研究和体内、体外检测分析表明,长期低剂量接触农药可以导致人体细胞和分子损伤,诱导细胞凋亡。农药致细胞及DNA损伤的机制主要与DNA加合物的形成、DNA单链和/或双链的断裂有关。此外,氧化应激参与农药致细胞及DNA损伤的过程,可能成为农药致细胞及DNA损伤的促发因素。从总体上看,其具体分子机制还不十分清楚,有待进一步研究。     

BP-4的模拟生物降解特性研究

为研究紫外吸收剂2-羟基-4-甲氧基二苯甲酮-5-磺酸(BP-4)的最大生物降解能力,采用欧洲经济合作与发展组织(OECD)生物降解测试标准方法——303A模拟试验-污水好氧处理:活性污泥单元法,建立并进行了城市污水处理厂曝气池环境模拟试验。研究结果表明:在单一新鲜活性污泥作为接种物条件下,BP-4在第47天达到降解稳定期,溶解性有机碳(DOC)去除率平均值为36.90%±5.68%(n=18)。在以10种不同来源混合接种物条件下,BP-4在第41天达到降解稳定期,去除率平均值为33.11%±4.87%(n=17)。研究结果表明BP-4在环境中的降解能力有限,在本模拟方法试验条件下只能部分降解。     

重金属Cr(VI)、Pb及Cu胁迫对双齿围沙蚕体腔细胞的DNA损伤

为探讨重金属Cr(VI)、Pb以及Cu对沙蚕体腔细胞DNA的毒性效应,以双齿围沙蚕为受试动物,重金属按不同剂量水平,Cr(VI):10、100和200 mg·L~(-1),Pb:5、50和100 mg·L~(-1),Cu:1、10和20 mg·L~(-1),分别胁迫沙蚕24 h,以不加任何重金属离子的海水为对照,采用单细胞凝胶电泳技术,检测其体腔细胞DNA损伤程度。结果表明,与空白对照组相比,3种重金属离子的各浓度组都能引起沙蚕体腔细胞DNA损伤,且3种重金属胁迫浓度与细胞DNA损伤程度之间存在显著的剂量-效应关系。双齿围沙蚕可以作为单细胞凝胶电泳的实验材料用于重金属所致环境污染的生物监测指示生物。     

三氯卡班对小鼠血浆内源性物质影响的代谢组学研究

三氯卡班被认定为一种新型的环境污染物,可能对动植物和人体产生危害,为探究三氯卡班的有害作用机制,选择C57BL6小鼠作为载体,利用分子生物学和报告基因方法考察了三氯卡班对肝脏的作用,同时利用代谢组学技术考察三氯卡班对血浆内源性代谢物变化的影响。结果表明,三氯卡班是核受体CAR的激活剂,可以提高肝脏CYP2b10的m RNA表达。同时血浆主要的内源性代谢物也产生了显著性变化,血浆中的脂肪酸比例都呈下降趋势,肉毒碱与乙酰肉碱的比例都呈上升趋势,花生四烯酸与肌酸的比例都呈上升趋势,这都与核受体CAR被激活密切相关,由此说明利用代谢组学技术能够全面地反映三氯卡班所造成的对机体的影响。     

苏丹红I对小鼠卵巢的损伤作用及对Caspase-3和Ki-67表达的影响

苏丹红是一种人工合成偶氮染料,可引起肝脏及泌尿系统等多个脏器的肿瘤,但苏丹红对生殖系统的毒性研究较少。本研究以昆明小鼠为受试对象,探讨苏丹红I对小鼠卵巢组织Caspase-3和Ki-67表达的影响。将24只昆明小鼠随机分为:对照组、低剂量(60 mg·kg~(-1))、中剂量(120 mg·kg~(-1))、高剂量(240 mg·kg~(-1))4组,6只/组。胃灌4周,4周末处死。HE染色观察各组卵巢组织病理变化,免疫组化法检测卵巢组织Caspase-3和Ki-67表达,Real time PCR检测卵巢组织Caspase-3和Ki-67 m RNA表达,Western blotting检测卵巢组织中Ki-67及Caspase-3蛋白表达。与对照组比较,实验组卵巢中Caspase-3阳性细胞率显著升高(P0.05),而Ki-67阳性细胞率显著降低(P0.05),Real time PCR及Western blotting结果与免疫组化法结果一致。本实验发现苏丹红染毒后颗粒细胞的Caspase-3表达增加,且Caspase-3表达呈剂量依赖性,但Ki-67表达受到抑制。     

Effects of an iron-silicon material,a synthetic zeolite and an alkaline clay on vegetable uptake of As and Cd from a polluted agricultural soil and proposed remediation mechanisms

Economic and highly effective methods of in situ remediation of Cd and As polluted farmland in mining areas are urgently needed. Pot experiments with Brassica chinensis L. were carried out to determine the effects of three soil amendments [a novel iron-silicon material (ISM), a synthetic zeolite (SZ) and an alkaline clay (AC)] on vegetable uptake of As and Cd. SEM–EDS and XRD analyses were used to investigate the remediation mechanisms involved. Amendment with ISM significantly reduced the concentrations of As and Cd in edible parts of B. chinensis (by 84–94 % and 38–87 %, respectively), to levels that met food safety regulations and was much lower than those achieved by SZ and AC. ISM also significantly increased fresh biomass by 169–1412 % and 436–731 % in two consecutive growing seasons, while SZ and AC did not significantly affect vegetable growth. Correlation analysis suggested that it was the mitigating effects of ISM on soil acidity and on As and Cd toxicity, rather than nutrient amelioration, that contributed to the improvement in plant growth. SEM–EDS analysis showed that ISM contained far more Ca, Fe and Mn than did SZ or AC, and XRD analysis showed that in the ISM these elements were primarily in the form of silicates, oxides and phosphates that had high capacities for chemisorption of metal(loid)s. After incubation with solutions containing 800 mg L^?1 AsO₄ ^2? or Cd²⁺, ISM bound distinctly higher levels of As (6.18 % in relative mass percent by EDS analysis) and Cd (7.21 % in relative mass percent by EDS analysis) compared to SZ and AC. XRD analysis also showed that ISM facilitated the precipitation of Cd²⁺ as silicates, phosphates and hydroxides, and that arsenate combined with Fe, Al, Ca and Mg to form insoluble arsenate compounds. These precipitation mechanisms were much more active in ISM than in SZ or AC. Due to the greater pH elevation caused by the abundant calcium silicate, chemisorption and precipitation mechanisms in ISM treatments could be further enhanced. That heavy metal(loid)s fixation mechanisms of ISM ensure the remediation more irreversible and more resilient to environmental changes. With appropriate application rate and proper nutrients supplement, the readily available and economic ISM is a very promising amendment for safe crop production on multi-metal(loids) polluted soils.     

Comparative experiment on treating digested piggery wastewater with a biofilm MBR and conventional MBR: simultaneous removal of nitrogen and antibiotics

A biofilm membrane bioreactor (BF-MBR) and a conventional membrane bioreactor (MBR) were parallelly operated for treating digested piggery wastewater. The removal performance of COD, TN, NH₄ ⁺-N, TP as well as antibiotics were simultaneously studied when the hydraulic retention time (HRT) was gradually shortened from 9 d to 1 d and when the ratio of influent COD to TN was changed. The results showed that the effluent quality in both reactors was poor and unstable at an influent COD/TN ratio of 1.0±0.2. The effluent quality was significantly improved as the influent COD/TN ratio was increased to 2.3±0.5. The averaged removal rates of COD, NH₄ ⁺-N, TN and TP were 92.1%, 97.1%, 35.6% and 54.2%, respectively, in the BF-MBR, significantly higher than the corresponding values of 91.7%, 90.9%, 17.4% and 31.9% in the MBR. Analysis of 11 typical veterinary antibiotics (from the tetracycline, sulfonamide, quinolone, and macrolide families) revealed that the BF-MBR removed more antibiotics than the MBR. Although the antibiotics removal decreased with a shortened HRT, high antibiotics removals of 86.8%, 80.2% and 45.3% were observed in the BF-MBR at HRTof 5–4 d, 3–2 d and 1 d, respectively, while the corresponding values were only 83.8%, 57.0% and 25.5% in the MBR. Moreover, the BF-MBR showed a 15% higher retention rate of antibiotics and consumed 40% less alkalinity than the MBR. Results above suggest that the BF-MBR was more suitable for digested piggery wastewater treatment.

Open image in new window

     

Assessment of leaching behavior and human bioaccessibility of rare earth elements in typical hospital waste incineration ash in China

Leaching behavior and gastrointestinal bioaccessibility of rare earth elements (REEs) from hospital waste incineration (HWI) fly and bottom ash samples collected from Beijing and Nanjing Cities were assessed. In the same ash sample, the leaching concentrations of individual REEs determined by the Toxicity Characteristic Leaching Procedure (TCLP) were higher than those detected by the European standard protocol (EN-type test), thereby suggesting that the low pH value of leaching solution was an important factor influencing the leachability of REE. The REE bioaccessibility results, which were evaluated using the physiologically based extraction test (PBET), indicated that REEs were highly absorbed during gastric phase by dissolution; and subsequently precipitated and/or re-adsorbed in small intestinal phase. The relative amounts of the total REEs extracted by the TCLP method, EN-type test and PBET test were compared. In addition to the pH value of extraction solutions, the chelating role of REEs with organic ligands used in the PBET method was also an important parameter affecting REE adsorption in human body. Additionally, this study showed that REEs were extracted by these methods as concomitants of heavy metals and anions (NO₃ ^–, F^–, SO₄ ^2–, and Cl^–) from HWI ash, which probably caused the remarkably complex toxicity on human body by the exposure pathway.

Open image in new window

     

Copper recovery from waste printed circuit boards concentrated metal scraps by electrolysis

Copper recovery is the core of waste printed circuit boards (WPCBs) treatment. In this study, we proposed a feasible and efficient way to recover copper from WPCBs concentrated metal scraps by direct electrolysis and factors that affect copper recovery rate and purity, mainly CuSO₄·5H₂O concentration, NaCl concentration, H₂SO₄ concentration and current density, were discussed in detail. The results indicated that copper recovery rate increased first with the increase of CuSO₄·5H₂O, NaCl, H₂SO₄ and current density and then decreased with further increasing these conditions. NaCl, H₂SO₄ and current density also showed a similar impact on copper purity, which also increased first and then decreased. Copper purity increased with the increase of CuSO₄·5H₂O. When the concentration of CuSO₄·5H₂O, NaCl and H₂SO₄ was respectively 90, 40 and 118 g/L and current density was 80 mA/cm², copper recovery rate and purity was up to 97.32% and 99.86%, respectively. Thus, electrolysis proposes a feasible and prospective approach for waste printed circuit boards recycle, even for e-waste, though more researches are needed for industrial application.

Open image in new window