Study on the hydrolysis/precipitation behavior of Keggin Al13 and Al30 polymers in polyaluminum solutions

The hydrolysis/precipitation behaviors of Al³⁺, Al₁₃ and Al₃₀ under conditions typical for flocculation in water treatment were investigated by studying the particulates' size development, charge characteristics, chemical species and speciation transformation of coagulant hydrolysis precipitates. The optimal pH conditions for hydrolysis precipitates formation for AlCl₃, PAC_Al13 and PAC_Al30 were 6.5–7.5, 8.5–9.5, and 7.5–9.5, respectively. The precipitates' formation rate increased with the increase in dosage, and the relative rates were AlCl₃ ? PAC_Al30 > PAC_Al13. The precipitates' size increased when the dosage increased from 50 μM to 200 μM, but it decreased when the dosage increased to 800 μM. The Zeta potential of coagulant hydrolysis precipitates decreased with the increase in pH for the three coagulants. The iso-electric points of the freshly formed precipitates for AlCl₃, PAC_Al13 and PAC_Al30 were 7.3, 9.6 and 9.2, respectively. The Zeta potentials of AlCl₃ hydrolysis precipitates were lower than those of PAC_Al13 and PAC_Al30 when pH > 5.0. The Zeta potential of PAC_Al30 hydrolysis precipitates was higher than that of PAC_Al13 at the acidic side, but lower at the alkaline side. The dosage had no obvious effect on the Zeta potential of hydrolysis precipitates under fixed pH conditions. The increase in Zeta potential with the increase in dosage under uncontrolled pH conditions was due to the pH depression caused by coagulant addition. Al–Ferron research indicated that the hydrolysis precipitates of AlCl₃ were composed of amorphous Al(OH)₃ precipitates, but those of PAC_Al13 and PAC_Al30 were composed of aggregates of Al₁₃ and Al₃₀, respectively. Al³⁺ was the most un-stable species in coagulants, and its hydrolysis was remarkably influenced by solution pH. Al₁₃ and Al₃₀ species were very stable, and solution pH and aging had little effect on the chemical species of their hydrolysis products. The research method involving coagulant hydrolysis precipitates based on Al–Ferron reaction kinetics was studied in detail. The Al species classification based on complex reaction kinetic of hydrolysis precipitates and Ferron reagent was different from that measured in a conventional coagulant assay using the Al–Ferron method. The chemical composition of Al_a, Al_b and Al_c depended on coagulant and solution pH. The Al_b measured in the current case was different from Keggin Al₁₃, and the high Al_b content in the AlCl₃ hydrolysis precipitates could not used as testimony that most of the Al³⁺ was converted to highly charged Al₁₃ species during AlCl₃ coagulation.     

Landfill site selection using spatial information technologies and AHP: A case study in Beijing,China

Site selection is an important and necessary issue for waste management in fast-growing regions. Because of the complexity of waste management systems, the selection of the appropriate solid waste landfill site requires consideration of multiple alternative solutions and evaluation criteria. Based on actual conditions of the study area, we considered economic factors, calculated criteria weights using the analytical hierarchy process (AHP), and built a hierarchy model for solving the solid waste landfill site-selection problem in Beijing, China. A geographic information system (GIS) was used to manipulate and present spatial data. All maps are graded from 1 (lowest suitability) to 5 (highest suitability) using spatial information technologies. The candidate sites were determined by aggregation based on the criteria weights. The candidate sites are divided by ‘best’, ‘good’ and ‘unsuitable’ landfill areas. Best landfill areas represent optimal sites; good landfill areas can be used as back-up candidate sites. Our work offers a siting methodology and provides essential support for decision-makers in the assessment of waste management problems in Beijing and other rapidly developing cities in developing countries.     

An Interval-Parameter Waste-Load-Allocation Model for River Water Quality Management Under Uncertainty

A simulation-based interval quadratic waste load allocation (IQWLA) model was developed for supporting river water quality management. A multi-segment simulation model was developed to generate water-quality transformation matrices and vectors under steady-state river flow conditions. The established matrices and vectors were then used to establish the water-quality constraints that were included in a water quality management model. Uncertainties associated with water quality parameters, cost functions, and environmental guidelines were described as intervals. The cost functions of wastewater treatment units were expressed in quadratic forms. A water-quality planning problem in the Changsha section of Xiangjiang River in China was used as a study case to demonstrate applicability of the proposed method. The study results demonstrated that IQWLA model could effectively communicate the interval-format uncertainties into optimization process, and generate inexact solutions that contain a spectrum of potential wastewater treatment options. Decision alternatives can be generated by adjusting different combinations of the decision variables within their solution intervals. The results are valuable for supporting local decision makers in generating cost-effective water quality management strategies.     

Diversity of Soil Nematodes in Areas Polluted with Heavy Metals and Polycyclic Aromatic Hydrocarbons (PAHs) in Lanzhou,China

This study investigated the soil nematode community structure along the Yellow River in the Lanzhou area of China, and analyzed the impact of heavy metals (Cd, Pb, Cr, Cu, and Zn) and polycyclic aromatic hydrocarbons (PAHs) on the nematode community. Soil samples from five locations (named A–E), which were chosen for soil analysis, showed significant differences in their heavy metal content (p < 0.01), as well as in the variety of nematodes (up to 41 genera) and families (up to 20) that were present. The different samples also differed significantly in the total PAH content (p < 0.05), as well as the six types of PAH present. Sites A–C showed the most severe contamination with heavy metals and PAHs; these sites had the lowest abundance of fungivores and omnivore/predators, but the proportion of bacteriovores was the highest (p < 0.05). Site E, in contrast, showed only minor pollution with heavy metals and PAHs, and it contained the highest abundance of plant parasites (p < 0.05). Several nematode ecological indicators were found to correlate with concentration of soil pollutants at all the sites tested: the maturity index (MI, in addition to plant parasites), plant parasite index (PPI), ΣMI (including all the soil nematodes), Shannon-Wiener diversity index (H′′), and Wasilewska index (WI). Disturbance to the soil environment was more severe when MI, ΣMI, and H′ values were lower. The results of the study show that the abundance and structure of the soil nematode communities in the sampling locations were strongly influenced by levels of heavy metals and PAHs in the soil. They also show that the diversity index H′ and the maturity index can be valuable tools for assessing the impact of pollutants on nematodes.     

Methodology of industry scale analysis under the constraint of regional resource capacity using HSY algorithm

This paper develops a methodology of proper scale analysis for regional industry development, which can be used in industry planning with the consideration of regional resource capacities. In the face of different data sources and even data scarcity, alternative methods based on linear programming and quadratic programming algorithms for calculating the resource intensity factors are designed. Based on the empirical study of industrialization, initial scenarios of industry development were set. Using HSY algorithm, sensitive industries that may cause exceeding regional resource capacity can be identified, and the risk of exceeding can be predicted and expressed in probability. Furthermore, a proper scale range can be designed for these sensitive industries according to resource capacity. Taking the case of Dalian city in China, this paper estimated the regional urban development plan, various resources capacities were studied, and land resources were estimated to be the most critical resource for the city. The land resource depletion intensities of different industries are calculated by quadratic programming algorithm. Under the constraint of 427.56 km² available industrial land resources, the electronic and power industries have the most significant impact on total land use, if the scale of power industry exceeds 1.27 billion USD, the probability of land resource capacity breakthrough will be 50%.     

TR-01稠油乳化降粘剂研究

针对河南油田井楼区块稠油,自制TR-01乳化降粘剂,通过实验研究了其降粘性能、稳定性,确定了降粘剂TR-01最佳浓度为0.3%、最佳油水比为70∶30。实验结果表明:TR-01乳化降粘剂对井楼区块油井的普遍适用性较强,具有较好的乳化降粘作用(降粘率达到99%以上),地层水对其降粘效果影响不大。其中的纳米成分能增加对污水中悬浮物的吸附能力和絮凝能力,对油田污水处理起到积极作用。     

压裂废液处理技术研究进展

综述了当前油气井作业中压裂废液处理的一些主要技术:氧化法、混凝法、Fe/C微电解法、多种处理技术联合使用等,从六个方面探讨了当前处理方法中存在的主要问题,指出了压裂废液处理技术的一个重要研究方向是优化压裂废液处理工艺,开发稳定可靠,高效价廉且无二次污染的压裂废液处理剂。     

陕北子长县阎家沟黄土滑坡特征及其变形机制

野外调查和钻探资料显示,阎家沟滑坡属大型黄土滑坡,滑坡体为中、晚更新世黄土.在滑坡前缘流水侵蚀坡脚和滑坡体上修建窑洞、梯田、排放生活用水等人类工程活动影响下以及在2002年7月4日连续强降雨的激发下,目前处于不稳定状态,若遇强降雨失稳概率很大.填埋滑坡体裂隙和孔洞、加强地表排水、在滑坡体前缘沟谷修建淤地坝是提高陕北此类滑坡稳定性最为经济有效的措施.     

冰雪灾害危机事件演化及衍生链特征分析

运用复杂网络的相关理论知识,在冰雪灾害危机事件演化机理研究的基础上对冰雪灾害危机事件演化构成和衍生链特征进行了分析.以2008年冰雪灾害危机事件演化为例将冰雪灾害危机事件演化划分为4种类型,构建了冰雪灾害危机事件演化的网络结构.在此基础上总结了冰雪灾害危机事件衍生链的特征,并对冰雪灾害危机事件演化特征进行了分析,为控制冰雪灾害危机事件的演化提供了理论依据.     

注浆法治理公路黄土暗穴病害的试验研究

注浆法是公路工程中治理暗穴的一种新方法.针对湿陷性黄土地区公路工程中大量发育的暗穴病害,通过室内浆液材料物理力学性能试验与工程现场模拟注浆效果试验,分析了以水泥为主剂的注浆材料在不同配合比情况下治理公路工程中暗穴的效果.室内外试验结果分析表明:浆液水灰比在2.5∶1～1.5∶1之间较为适宜;在不影响路基路面的正常压力下有效的加固半径是1.0 m～1.5 m;在特殊情况下为了使浆液快速凝结可以加入一定量的水玻璃作为速凝剂;可以采用二次注浆加强治理的效果.