Diffusive gradients in thin films using molecularly imprinted polymer binding gels for in situ measurements of antibiotics in urban wastewaters

• Selective molecularly imprinted polymer (MIP) binding gel was prepared. • MIP-DGT showed excellent uptake performance for antibiotics. • In situ measurement of antibiotics in wastewaters via MIP-DGT was developed. • The MIP-DGT method was robust, reliable, and highly sensitive. Urban wastewater is one of main sources for the introduction of antibiotics into the environment. Monitoring the concentrations of antibiotics in wastewater is necessary for estimating the amount of antibiotics discharged into the environment through urban wastewater treatment systems. In this study, we report a novel diffusive gradient in thin films (DGT) method based on molecularly imprinted polymers (MIPs) for in situ measurement of two typical antibiotics, fluoroquinolones (FQs) and sulfonamides (SAs) in urban wastewater. MIPs show specific adsorption toward their templates and their structural analogs, resulting in the selective uptake of the two target antibiotics during MIP-DGT deployment. The uptake performance of the MIP-DGTs was evaluated in the laboratory and was relatively independent of solution pH (4.0–9.0), ionic strength (1–750 mmol/L), and dissolved organic matter (DOM, 0–20 mg/L). MIP-DGT samplers were tested in the effluent of an urban wastewater treatment plant for field trials, where three SA (sulfamethoxazole, sulfapyridine, and trimethoprim) and one FQ (ofloxacin) antibiotics were detected, with concentrations ranging from 25.50 to 117.58 ng/L, which are consistent with the results measured by grab sampling. The total removal efficiency of the antibiotics was 80.1% by the treatment plant. This study demonstrates that MIP-DGT is an effective tool for in situ monitoring of trace antibiotics in complex urban wastewaters.     

A review of measurement methods for peracetic acid (PAA)

• Physical and chemical properties and application of peracetic acid solution. • Determination method of high concentration peracetic acid. • Determination method of residual peracetic acid (low concentration). Peroxyacetic acid has been widely used in food, medical, and synthetic chemical fields for the past several decades. Recently, peroxyacetic acid has gradually become an effective alternative disinfectant in wastewater disinfection and has strong redox capacity for removing micro-pollutants from drinking water. However, commercial peroxyacetic acid solutions are primarily multi-component mixtures of peroxyacetic acid, acetic acid, hydrogen peroxide, and water. During the process of water treatment, peroxyacetic acid and hydrogen peroxide (H₂O₂) often coexist, which limits further investigation on the properties of peroxyacetic acid. Therefore, analytical methods need to achieve a certain level of selectivity, particularly when peroxyacetic acid and hydrogen peroxide coexist. This review summarizes the measurement and detection methods of peroxyacetic acid, comparing the principle, adaptability, and relative merits of these methods.     

The influence on carbon,nitrogen recycling,and greenhouse gas emissions under different C/N ratios by black soldier fly

Environmental Science and Pollution Research - Currently, sustainable utilization, including recycling and valorization, is becoming increasingly popular in waste management. Black soldier fly...     

N2 fixation in urbanization area rivers: spatial-temporal variations and influencing factors

Environmental Science and Pollution Research - While nitrogen (N2) fixation is an important process in nitrogen (N) biogeochemical cycling, supplying a significant portion of the N in natural...     

NOx attenuation in flue gas by •OH/SO4•--based advanced oxidation processes

Environmental Science and Pollution Research - The combustion of fossil fuels has resulted in rapidly increasing emissions of nitrogen oxide (NOx), which has caused serious human health and...     

N2O profiles in the enhanced CANON process via long-term N2H4 addition: minimized N2O production and the influence of exogenous N2H4 on N2O sources

Environmental Science and Pollution Research - Production of the greenhouse gas nitrous oxide (N2O) from the completely autotrophic nitrogen removal over nitrite (CANON) process is of growing...     

Functional wastepaper-montmorillonite composite aerogel for Cd2+ adsorption

Environmental Science and Pollution Research - In this study, a composite aerogel (WP-MMT) composed of wastepaper (WP) and montmorillonite (MMT) was prepared by ambient pressure drying technology...     

Soil labile and recalcitrant carbon and nitrogen dynamics in relation to functional vegetation groups along precipitation gradients in secondary grasslands of South China

Environmental Science and Pollution Research - Soil labile and recalcitrant carbon (C) and nitrogen (N) are strongly controlled by plant inputs and climatic conditions. However, the interrelation...     

宁东地区主动配电网建设的规划思路

近年来,配电网中分布式能源、电动汽车等负荷的接入率越来越高,配电网的网络架构和功能趋于复杂,在电网运行中带来不少问题。基于泛在电力物联网的新形势下,对宁夏宁东地区分布式电源、电动汽车等负荷的接入以及宁东基地用户侧的用电特点进行分析,提出主动配电网建设的思路及初步治理措施,对宁东地区“十四五”电网规划建设具有一定的现实意义和参考价值。     

场开挖爆破粉尘粒度分布特征杨房沟水电站料∗

通过分析杨房沟水电站料场开挖爆破粉尘的粒度分布特征,为改进爆破降尘工艺提供粉尘粒度学依据。在料场爆破区、工作平盘、出入沟、最终边帮等处采集粉尘样品,采用激光粒度分布仪测试粉尘样品的分散度;以粉尘粒度分布数据拟合分布函数,表明爆破粉尘的粒度分布函数呈现对数正态分布特征;与经典的罗森·拉姆勒(Rosin?Rammler)分布函数模型对比分析表明,对数正态分布函数用于描述爆破粉尘的粒度分布更加准确。基于对数正态分布函数模型,厘定爆破粉尘粒度分布参数,分析TSP、PM10、PM5、PM2.5及PM1粉尘占全尘的比例,定量表达爆破粉尘粒度分布特征。结果表明：杨房沟水电站料场爆破粉尘具有显著的对数正态分布特征;离爆破中心距离越远,粒度分布范围越窄,对人体有害粉尘占比越大;建议采用爆破粉尘捕捉吸附技术、掺和湿润性抑尘剂的水雾喷洒等降尘措施。