生物基聚合物PHBV和PLA复合材料在不同介质中的生物降解及其影响因素

传统工艺的塑料生产不仅依赖石油资源的持续开发利用,同时给环境造成了前所未有的压力,近年来生物基聚合物（聚（3-羟基-3-戊酸酯）-PHBV,聚乳酸-PLA）日渐成为传统石油基塑料的替代产品.本文采用呼吸测试手段,旨在揭示均质复合材料在不同环境介质（土壤、熟化堆肥、水体）条件下及有机添加剂（木质素）,无机添加剂（蒙脱石）和天然有机物链增长剂（Joncryl）作用下的生物降解特征.结果表明：当链增长剂Joncryl添加量为5%时,对所有介质PHBV和PLA复合材料产生显著抑制作用.Joncryl添加量为0.2%时,未对所测样品的生物降解行为产生干扰作用.在熟化堆肥介质中,PLA复合材料比PHBV基质混合物的生物降解速率明显降低.有机木质纤维添加剂（榛子壳粉末）单独在聚合物中添加或者和链增长剂Joncryl以及非有机添加剂（Dellite72T）共同作用下都可促进PLA聚合物中各组分的相容连接性.实验结果表明,新型添加剂在不同介质中以二元或三元添加的方式对生物降解过程产生重要影响,该研究将为新型材料使用后的生物降解效应提供理论依据.     

Potential of secondary aerosol formation from Chinese gasoline engine exhaust

Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds(VOCs). However,little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4–5 hr simulation, which was estimated to represent more than 10 days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol(SOA) production was 426 ± 85 mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.     

The effects of autophagy on vascular endothelial cells induced by airborne PM2.5

The purpose of this study was to examine the direct toxicity of PM2.5 collected from Beijing on human umbilical vein endothelial cells(HUVEC). A Cell Counting Kit 8(CCK8) assay demonstrated that PM2.5 exposure decreased the proliferation of HUVECs in a dosedependent manner. We also found that PM2.5 exposure induced autophagy in HUVECs, as evidenced by:(1) an increased number of double-membrane vesicles;(2) enhanced conversion and punctuation of the microtubule-associated protein light chain 3(LC3); and(3) decreased levels of the selective autophagy substrate p62 in a time-dependent manner.Furthermore, promoting autophagy in PM2.5-exposed HUVECs with rapamycin increased the cell survival rate, whereas inhibiting autophagy via 3-methyladenine significantly decreased cell survival. These results demonstrate that PM2.5 exposure can induce cytotoxicity and autophagy in HUVECs and that autophagy play a protective role against PM2.5-induced cytotoxicity. The findings of the present study imply a direct toxic effect of PM2.5 on HUVECs and provide novel insight into the mechanism of cardiovascular diseases caused by PM2.5 exposure.     

Mercury flows in large-scale gold production and implications for Hg pollution control

Large-scale gold production(LSGP) is one of the five convention-related atmospheric mercury(Hg) emission sources in the Minamata Convention on Mercury. However, field experiments on Hg flows of the whole process of LSGP are limited. To identify the atmospheric Hg emission points and understand Hg emission characteristics of LSGP, Hg flows in two gold smelters were studied. Overall atmospheric Hg emissions accounted for 10%–17% of total Hg outputs and the Hg emission factors for all processes were 7.6–9.6 kg/ton. There were three dominant atmospheric Hg emission points in the studied gold smelters, including the exhaust gas of the roasting process, exhaust gas from the environmental fog collection stack and exhaust gas from the converter of the refining process. Atmospheric Hg emissions from the roasting process only accounted for 16%–29% of total emissions and the rest were emitted from the refining process. The overall Hg speciation profile(gaseous elemental Hg/gaseous oxidized Hg/particulate-bound Hg) for LSGP was 34.1/57.1/8.8. The dominant Hg output byproducts included waste acid, sulfuric acid and cyanide leaching residue. Total Hg outputs from these three byproducts were 80% in smelter A and 84% in smelter B. Our study indicated that previous atmospheric Hg emissions from large-scale gold production might have been overestimated.Hg emission control in LSGP is not especially urgent in China compared to other significant emission sources(e.g., cement plants). Instead, LSGP is a potential Hg release source due to the high Hg output proportions to acid and sludge.     

Relationship between physicochemical properties and dewaterability of hydrothermal sludge derived from different source

Sewage sludge (SS) and deinking sludge (DS) were used to comparatively study the hydrothermal dewatering of sludge with different components. For a better overview, an insight into the relationship between physicochemical properties and dewaterability of hydrothermal sludge was provided. Results found that not all kinds of sludge were suitably conditioned by hydrothermal treatment (HT) in term of the elevation of dewaterability. Higher hydrothermal temperature tended to enhance the dewaterability of SS rather than DS, which was supported by the variation of their physicochemical properties (including water distribution, bonding energy, extracellular polymeric substance (EPS), particles size, acid functional groups and zeta potential in this study). In addition, the changes in surface morphology suggested that the reverse effect of HT on sludge dewaterability was mainly due to their dewatering behavior. For SS, the destruction of EPS structure leaded to the release of bound water, thereby strengthening sludge dewatering. Conversely, “Bridging effect” generated by lignocellulose in DS was beneficial for sludge dewatering; however, the increasing hydrothermal temperature degraded part of lignocellulose and weakened “bridging effect”, finally resulting in worse dewaterability of DS.     

Effects of Na+ on Cu/SAPO-34 for ammonia selective catalytic reduction

Copper-exchanged chabazite (Cu/CHA) catalysts have been found to be affected by alkali metal and alkaline earth ions. However, the effects of Na⁺ ions on Cu/SAPO-34 for ammonia selective catalytic reduction (NH₃-SCR) are still unclear. In order to investigate the mechanism, five samples with various Na contents were synthesized and characterized. It was observed that the introduced Na⁺ ion-exchanges with H⁺ and Cu^2 + of Cu/SAPO-34. The exchange of H⁺ is easier than that of isolated Cu^2 +. The exchanged Cu^2 + ions aggregate and form “CuAl₂O₄-like” species. The NH₃-SCR activity of Cu/SAPO-34 decreases with increasing Na content, and the loss of isolated Cu^2 + and acid sites is responsible for the activity loss.     

Seasonal variation and size distribution of biogenic secondary organic aerosols at urban and continental background sites of China

Size-resolved biogenic secondary organic aerosols(BSOA) derived from isoprene and monoterpene photooxidation in Qinghai Lake, Tibetan Plateau(a continental background site) and five cities of China were measured using gas chromatography/mass spectrometry(GC/MS). Concentrations of the determined BSOA are higher in the cities than in the background and are also higher in summer than in winter. Moreover, strong positive correlations(R2= 0.44–0.90) between BSOA and sulfate were found at the six sites,suggesting that anthropogenic pollution(i.e., sulfate) could enhance SOA formation,because sulfate provides a surface favorable for acid-catalyzed formation of BSOA. Size distribution measurements showed that most of the determined SOA tracers are enriched in the fine mode( 3.3 μm) except for cis-pinic and cis-pinonic acids, both presented a comparable mass in the fine and coarse( 3.3 μm) modes, respectively. Mass ratio of oxidation products derived from isoprene to those from monoterpene in the five urban regions during summer are much less than those in Qinghai Lake region. In addition, in the five urban regions relative abundances of monoterpene oxidation products to SOA are much higher than those of isoprene. Such phenomena suggest that BSOA derived from monoterpenes are more abundant than those from isoprene in Chinese urban areas.     

房屋建筑工程施工现场环境保护以及节能降耗控制措施研究

房屋建筑施工阶段是建筑工程中最为重要的阶段,也是资源消耗和环境污染的集中阶段。房屋建筑施工造成的环境污染主要来源于:施工中的固体垃圾、液体垃圾和气体垃圾,且在施工现场,相关人员节能降耗意识薄弱,对于施工中存在的资源浪费现象经常会忽视。基于此,给出了如下措施:加强施工过程的监控,合理排放施工现场的污水和固体废弃物;提高水的利用率,并在施工过程中,通过节水工艺对路面进行喷洒;合理排放施工过程产生的污水,对含有化学品、油漆的建筑材料要实施防渗漏措施;设置封闭式垃圾容器,利用袋装化形式将施工垃圾带出施工现场;倡导绿色施工。     

感潮河段污水处理厂尾水对受纳水体的水质影响研究

感潮河段污水处理厂尾水排放对受纳水体产生一定影响,利用二维水动力水质耦合模型,以COD、NH3-N、TP为污染因子,分别以正常排放和事故排放两种条件,模拟江苏南部某污水处理厂尾水排放,分析江段大小潮时污染物浓度增量情况。实验结果表明:正常排放,尾水对排放口附近江段保护区水质影响小;事故排放,尾水对保护区水质无影响,但长江水体影响范围增大,沿岸污染物浓度增高,且小潮周期影响作用强于大潮周期,污水处理厂应加强管理,尤其在小潮时应避免污水事故排放。     

基于环境温度传感的节水调节器设计研究

传统节水调节器使用半自动机械控制,能够实现部分水资源节约,但在新疆等温度交替变化明显地区,无法根据温度变化情况实现自动控制节水调节,从而造成部分水资源浪费。为此提出基于环境温度传感的节水调节器设计。采用concise结构设计,在阻挠蝶板上增加环境温度传感装置,依托沿程阻力系数判定温度传感器节水调节系数ξ,通过不同ξ值的反馈,针对性的采取相应调节措施;使用调节Accurate检验机制,对温度变化幅度k进行测定,确定调节幅度有效取值,完成节水调节器的自动调节控制,实现基于环境温度传感的节水调节器设计。