Bereavement and mourning after a shipping disaster: The case for intervention

This paper describes the help given by the social services department of a shipping company to bereaved families following a shipping disaster. In the absence of clear, factual and prompt information from an authoritative source, there is a tendency for bereaved individuals to deny their loss and thereby delay the process of mourning and eventual recovery. Appropriate intervention and support can help to overcome this tendency as was seen in the Madasa case.     

铁路运输安全事故灰色预测方法研究

近年来 ,我国铁路运输发展迅猛 ,尤其是列车运行多次提速 ,列车运行密度加大 ,对铁路运输安全管理不断提出了新的要求。依靠科技进步 ,尽量防止或减少安全事故的发生 ,要应用安全信息技术 ,使安全管理人员对铁路运输安全现状及未来事故发展趋势有所了解 ,提高安全防范意识及事故处理能力 ,同时还要不断提高员工的安全意识和安全文化素质 ,这些方法对于提高安全管理水平 ,降低事故的发生 ,保护人民的生命安全与健康具有重要意义。铁路运输安全事故预测技术就可很好解决上述问题。笔者应用灰色预测理论 ,建立了铁路运输安全事故预测模型 ,开发了安全事故预测软件系统 ,并以某铁路运输企业为例 ,介绍了研制的灰色预测系统软件的应用效果     

用伴随方法对毒气泄漏事件进行危害评估

由于自然、人为等因素造成的有毒气体泄漏事件随时威胁着人们的生命安全。对于这类突发事故进行危害评估 ,在应急救援中 ,可以给决策者提供参考 ,使之采取有效措施 ,最大限度地降低事故危害程度 ,减少事故恶果及引起的恐慌。由于毒气泄漏位置事先无法确定 ,如果用常规方法进行逐点评估 ,将面临着巨大的计算量而难以进行。笔者发展了一种伴随方法 ,对风险函数的表达式进行等价变形 ,通过求解伴随方程 ,可以一次求得任意位置的毒气泄漏的风险值 ,大大降低计算量和工作量。此法在化学工厂和仓库设置 ,煤气网铺设和监测点选取 ,城市应急中心设置等多种安全规划中均有重要价值 ,为快速危害评估 ,降低化学事故危害提供了有力的研究工具和实用方法。     

低床层烟炱吸附法脱硫试验及机理探讨

研究了以锅炉烟气沉降物为吸附剂的烟炱吸附法脱除SO2的工艺条件，结果表明该法较适宜的工艺条件为SO2浓度小于2400mg/L,烟气流速小于36m/h，烟气温度低于100℃，此时脱硫效率可达30％以上。初步探讨了烟炱吸附法脱硫的作用机理。     

人因评价的定量化研究

人因评价是安全评价中的重要组成部分，在结合层次分析法和综合加权法的基础上，建立了人因评价的量化模型。     

大型构件防腐喷砂(涂)车间通风除尘设计

考虑到大型构件喷砂（涂）车间铝粉尘污染的特点以及构件进出空间的限制，比较了各种类型的除尘器，选择了最合理的通风除尘方案，进行了通风除尘系统的设计。该设计方案实施后，除尘效果显著。     

Mobility control: How injected surfactants and biostimulants may be forced into low‐permeability units

Recovering dense nonaqueous‐phase liquid (DNAPL) remains one of the most difficult problems facing the remediation industry. Still, the most common method of recovering DNAPL is to physically remove the contaminants using common technologies such as total fluids recovery pumps, vacuum systems, and “pump‐and‐treat.” Increased DNAPL removal can be attained using surfactants to mobilize and/or solubilize the pollutants. However, very little is understood of the methods developed by petroleum engineers beginning in the 1960s to overcome by‐passed, low‐permeability zones in heterogeneous oil reservoirs. By injecting or causing the formation of viscous fluids in the subsurface, petroleum engineers caused increased in‐situ pressures that forced fluid flow into low permeability units as well as the higher permeability thief zones. Polymer flooding involves injecting a viscous aqueous polymer solution into the contaminated aquifer. Foam flooding involves injecting surfactant to decontaminate the high‐permeability zones and then periodic pulses of air to cause a temporary viscous foam to form in the high‐permeable zones after all DNAPL is removed. Later surfactant pulses are directed by the foam into unswept low‐permeable units. These methods have been applied to DNAPL removal using surfactants but they can also be applied to the injection of bio‐amendments into low‐permeability zones still requiring continued remediation. Here we discuss the principles of mobility control as practiced in an alluvial aquifer contaminated with chlorinated solvent and coal tar DNAPLs as well as some field results. © 2003 Wiley Periodicals, Inc.