Immediate behavioural responses to earthquakes in Christchurch,New Zealand,and Hitachi,Japan

This study examines people's immediate responses to earthquakes in Christchurch, New Zealand, and Hitachi, Japan. Data collected from 257 respondents in Christchurch and 332 respondents in Hitachi revealed notable similarities between the two cities in people's emotional reactions, risk perceptions, and immediate protective actions during the events. Respondents' physical, household, and social contexts were quite similar, but Hitachi residents reported somewhat higher levels of emotional reaction and risk perception than did Christchurch residents. Contrary to the recommendations of emergency officials, the most frequent response of residents in both cities was to freeze. Christchurch residents were more likely than Hitachi residents to drop to the ground and take cover, whereas Hitachi residents were more likely than Christchurch residents to evacuate immediately the building in which they were situated. There were relatively small correlations between immediate behavioural responses and demographic characteristics, earthquake experience, and physical, social, or household context.     

An empirical model of soil chemical properties that regulate methane production in Japanese rice paddy soils

To understand which soil chemical properties are the best predictors of CH4 production in rice paddy soils, a model was developed with empirical data from nine types of rice soils collected around Japan and anaerobically incubated at 30 degrees C for 16 wk in laboratory conditions. After 1, 2, 4, 8, and 16 wk of incubation, CO2, CH4, and Fe(II) were measured to understand soil organic matter decomposition and iron (Fe) reduction. Available N (N ava) was also measured at the end of incubation. The results showed that decomposable C and reducible Fe are two key parameters that regulate soil CH(4) production (P CH4). There was a significant relationship between decomposable C and available N (N ava) (r2 = 0.975**). Except for a sandy soil sample, a significant relationship between total Fe (Fe total) and reducible Fe was found. From this experiment, a simple model of soil CH4 production was developed: P CH4 = 1.593N(ava) - 2.460Fe total/1000 (each unit was mg kg(-1) soil). After simulated CH4 production by two soil chemical properties as above, there was a significant consistency between model simulation and actual measurement (r2 = 0.831**).     

Prioritizing groundwater remediation policies: a fuzzy compatibility analysis decision aid

The implementation of groundwater remediation strategies in contaminated areas includes not only a cost-benefit analysis and an environmental risk assessment but also another type of study called compatibility analysis. A compatibility analysis targets the interactions between remediation technologies and site characteristics, such as the types of active contaminants and their concentrations, soil composition and geological features, etc. The purpose of this analysis is to identify the most compatible remediation plan for the contaminated site. In this paper, we introduce a decision support system for the prioritization of remediation plans based on their estimated compatibility index. As this model receives data in terms of linguistic judgments and experts' opinions, we use fuzzy sets theory to deal with these uncertainties. First, we break down the concept of compatibility into the measurable factors. Then by using a multiple-attribute decision-making (MADM) outline, we compute a factorial, regional and overall compatibility indicator for each plan. Finally, by comparing these generated indicators, we rank the remediation policies.     

An integrated fuzzy-stochastic modeling approach for risk assessment of groundwater contamination

An integrated fuzzy-stochastic risk assessment (IFSRA) approach was developed in this study to systematically quantify both probabilistic and fuzzy uncertainties associated with site conditions, environmental guidelines, and health impact criteria. The contaminant concentrations in groundwater predicted from a numerical model were associated with probabilistic uncertainties due to the randomness in modeling input parameters, while the consequences of contaminant concentrations violating relevant environmental quality guidelines and health evaluation criteria were linked with fuzzy uncertainties. The contaminant of interest in this study was xylene. The environmental quality guideline was divided into three different strictness categories: "loose", "medium" and "strict". The environmental-guideline-based risk (ER) and health risk (HR) due to xylene ingestion were systematically examined to obtain the general risk levels through a fuzzy rule base. The ER and HR risk levels were divided into five categories of "low", "low-to-medium", "medium", "medium-to-high" and "high", respectively. The general risk levels included six categories ranging from "low" to "very high". The fuzzy membership functions of the related fuzzy events and the fuzzy rule base were established based on a questionnaire survey. Thus the IFSRA integrated fuzzy logic, expert involvement, and stochastic simulation within a general framework. The robustness of the modeling processes was enhanced through the effective reflection of the two types of uncertainties as compared with the conventional risk assessment approaches. The developed IFSRA was applied to a petroleum-contaminated groundwater system in western Canada. Three scenarios with different environmental quality guidelines were analyzed, and reasonable results were obtained. The risk assessment approach developed in this study offers a unique tool for systematically quantifying various uncertainties in contaminated site management, and it also provides more realistic support for remediation-related decisions.     

乡村人居环境系统韧性的演变规律及其提升路径——以国家城乡融合发展试验区重庆西部片区为例

以国家城乡融合发展试验区——重庆西部片区为研究区,以2009年、2014年、2019年为研究时点,以2009—2019年为研究时段,按照思想缘起、理论基础、实证演绎、提升路径的研究思路,建立乡村人居环境系统韧性测度的指标体系,分析其演变规律。研究结果表明：2009—2019年,重庆西部片区的乡村人居环境系统韧性水平不断上升,呈现出“南高北低”的空间格局。各子系统韧性在时间上呈现出不同程度的增长趋势,在空间上差异明显：自然系统韧性与人类系统韧性分别呈现出“由南向北递减”和“东西部向中部递减”的空间格局;居住系统韧性与支撑系统韧性则分别呈现出由“低值点缀分布”逐渐过渡到较为均衡和“普遍均衡、高低值点缀”的空间格局;社会系统韧性表现为“西部增强、东部减弱”的空间格局特征。借助障碍度模型对重庆西部片区乡村人居环境系统韧性提升的障碍因子及不同区县面临的主导障碍进行诊断,根据结果将重庆西部片区划分为单一主导障碍型、双重障碍型与三层障碍型三种类型,据此设计乡村人居环境系统韧性提升的差异化路径,以期打破重庆西部片区乡村人居环境系统韧性提升的多重制约。     

FeS对CW-MFC系统降解活性艳红X-3B效果及过程的影响

在自行构建的人工湿地-微生物燃料电池(CW-MFC)系统中,以砾石填料为对照,研究了FeS对活性艳红X-3B脱色效果及降解过程的影响.结果表明,加在底层区域的FeS能够显著提高CW-MFC对活性艳红X-3B的脱色效果和系统产电性能.FeS的投加使得系统脱色率在进水活性艳红X-3B浓度200mg/L、葡萄糖浓度100mg/L条件下达到99.83%.在进水活性艳红X-3B浓度100mg/L、葡萄糖浓度200mg/L条件下,FeS组最大功率密度达到0.849W/m³.活性艳红X-3B在系统中的脱色主要发生在底层和阳极区域,由紫外-可见全波长扫描图谱和GC-MS扫描图谱可知FeS在该区域促进了偶氮双键的断裂,并有利于脱色产物苯胺、三嗪结构、萘环结构的进一步降解.     

介质阻挡放电等离子体老化微塑料及对Zn (II)吸附的影响

为了在实验中缩短微塑料的老化时间,更真实地模拟自然老化条件,采用介质阻挡放电（DBD）等离子体老化聚乙烯微塑料（PE-MP）和聚丙烯微塑料（PP-MP）,同时研究了老化前后PE-MP和PP-MP对Zn （II）的吸附过程和机理.随着放电时间延长和输入电压升高,微塑料表面出现微小裂纹或孔洞,形成含氧官能团.老化后PE-MP和PP-MP对Zn （II）的吸附容量分别提高了22.7%和14.8%.老化前后微塑料对Zn （II）的吸附均符合准二级动力学模型.颗粒内扩散模型表明,Zn （II）在微塑料上的吸附过程可分为快速吸附,慢速吸附和吸附平衡3个阶段.同时,老化前后微塑料对Zn （II）的吸附均符合Langmuir吸附等温线模型.热力学结果表明,微塑料对Zn （II）的吸附是自发的吸热过程.Ca²⁺、腐殖酸和低pH值不利于微塑料对Zn （II）的吸附.     

Effects of artificially induced complete mixing on dissolved organic matter in a stratified source water reservoir

Naturally complete mixing promotes the spontaneous redistribution of dissolved oxygen(DO), representing an ideal state for maintaining good water quality, and conducive to the biomineralization of organic matter. Water lifting aerators(WLAs) can extend the periods of complete mixing and increase the initial mixing temperature. To evaluate the influence of artificial-induced continuously mixing on dissolved organic matter(DOM) removal performance, the variations of DOM concentrations, optical cha...     

Extracellular polymeric substance induces biogenesis of vivianite under inorganic phosphate-free conditions

Vivianite is often found in reducing environments rich in iron and phosphorus from organic debris degradation or phosphorus mineral dissolution. The formation of vivianite is essential to the geochemical cycling of phosphorus and iron elements in natural environments. In this study, extracellular polymeric substances (EPS) were selected as the source of phosphorus. Microcosm experiments were conducted to test the evolution of mineralogy during the reduction of polyferric sulfate flocs (PFS) by Shewanella oneidensis MR-1 (S. oneidensis MR-1) at EPS concentrations of 0, 0.03, and 0.3 g/L. Vivianite was found to be the secondary mineral in EPS treatment when there was no phosphate in the media. The EPS DNA served as the phosphorus source and DNA-supplied phosphate could induce the formation of vivianite. EPS impedes PFS aggregation, contains redox proteins and stores electron shuttle, and thus greatly promotes the formation of minerals and enhances the reduction of Fe(III). At EPS concentration of 0, 0.03, and 0.3 g/L, the produced HCl-extractable Fe(II) was 107.9, 111.0, and 115.2 mg/L, respectively. However, when the microcosms remained unstirred, vivianite can be formed without the addition of EPS. In unstirred systems, the EPS secreted by S. oneidensis MR-1 could agglomerate at some areas, resulting in the formation of vivianite in the proximity of microbial cells. It was found that vivianite can be generated biogenetically by S. oneidensis MR-1 strain and EPS may play a key role in iron reduction and concentrating phosphorus in the oligotrophic ecosystems where quiescent conditions prevail.     

A novel approach for VOC source apportionment combining characteristic factor and pattern recognition technology in a Chinese industrial area

Volatile organic compound (VOC) emission control and source apportionment in small-scale industrial areas have become key topics of air pollution control in China. This study proposed a novel characteristic factor and pattern recognition (CF-PR) model for VOC source apportionment based on the similarity of characteristic factors between sources and receptors. A simulation was carried out in a typical industrial area with the CF-PR model involving simulated receptor samples. Refined and accurate source profiles were constructed through in situ sampling and analysis, covering rubber, chemicals, coating, electronics, plastics, printing, incubation and medical treatment industries. Characteristic factors of n-undecane, styrene, o-xylene and propane were identified. The source apportionment simulation results indicated that the predicted contribution rate was basically consistent with the real contribution rate. Compared to traditional receptor models, this method achieves notable advantages in terms of refinement and timeliness at similar accuracy, which is more suitable for VOC source identification and apportionment in small-scale industrial areas.