四氨基酞菁钯/γ-Al_2O_3可见光催化降解罗丹明B

采用浸渍法制备了四氨基酞菁钯(PdTAPc)/γ-Al_2O_3负载型光催化剂,采用UV-Vis,FTIR,XRD,SEM技术对其进行了表征,并将其用于罗丹明B的可见光催化降解,考察了光催化剂加入量、溶液pH、H_2O_2加入量、反应温度对罗丹明B降解效果的影响,并对光催化剂的稳定性进行了测试。表征结果显示,PdTAPc以圆片状负载于γ-Al_2O_3上,二者的结构均未发生明显变化。实验结果表明:在光催化剂加入量1.6 g/L、溶液pH 7.0、H_2O_2加入量12 mmol/L、反应温度20℃的优化条件下反应120 min,罗丹明B(质量浓度0.05 g/L)的降解率高达95%;光催化剂具有较高的稳定性,使用4次后罗丹明B的降解率仍高于85%。     

抗生素与LED209对大肠杆菌的联合毒性机制

抗生素是一把双刃剑,在提高医疗水平的同时会促进抗性基因的发展。群体感应抑制剂(quorum sensing inhibitors,QSIs)可有效地避免这一缺陷,有望成为抗生素的替代品而与抗生素有环境共存的可能,但目前尚缺乏它们的联合毒性机制及其相关的环境风险评价研究。本文以大肠杆菌为受试生物,测定了群体感应抑制剂N-苯基-4-(3-苯基硫代脲基)苯磺酰胺(LED209)与5种抗生素的单一和二元联合毒性。结果表明,LED209与5种抗生素的联合毒性作用均表现为拮抗,推测是LED209通过影响鞭毛合成,减弱了抗生素对大肠杆菌的生物有效性;同时通过拆分分子式,发现了拮抗作用可能源于LED209分子式中的含苯基和硫代脲基的L1分子,因此建议未来在LED209药物优化时,应尽可能的保留L1部分的基团,从而保证混合体系的最小环境风险。本研究不仅为联合用药提供依据,而且从环境风险评价角度为抗生素替代品LED209的结构优化提供理论指导。     

航天器局部载荷模态分析方法研究

文章在介绍了模态试验基本方法和基本原理的基础上,着重探讨了锤击法测量航天器局部载荷结构的模态试验方法。通过对该载荷不同方向的激励,得到了其各个方向的模态频率、模态阻尼和模态振型,为航天器有效载荷设计及修改提供参考意见。     

SGA对垃圾焚烧飞灰中重金属的固化性能研究

根据EPA1311、HJ／T299—2007、HJ／T300—2007和HJ557—2009等国内外不同标准,研究了深圳某垃圾焚烧发电厂垃圾焚烧飞灰的浸出毒性,探讨了六硫代胍基甲酸（sixthioguanidineacid,SGA）、二甲基二硫代氨基甲酸盐（sodiumdimethyldithiocarbamate,SDD）和Ca（OH）2浓度对垃圾焚烧飞灰中重金属的固定性能的影响。研究结果表明,随着浸提液pH的降低,该厂焚烧飞灰中大部分金属元素的浸出量增大,焚烧飞灰浸出液中的cd、Ni、Ph和zn浓度分别超过国家危险废物鉴别标准（GB5085．3—2007）规定值的4．75倍、1．47倍、6．72倍和2．20倍,属于危险废弃物,必须进行稳定化处理。当固化剂SGA加入量为0．1mol／kg时,稳定化后的重金属浸出浓度已经低于危险废物鉴别标准,且对Cd、Cr、Cu和Pb的固化性能优于SDD和Ca（OH）2;当固化剂SGA、SDD和Ca（OH）2加入量为0．5mol／kg时,稳定化后的焚烧飞灰重金属浸出浓度均低于国家危险废物鉴别标准（GB5085．3-2007）中的规定值。与SDD和Ca（OH）：相比,SGA对垃圾焚烧飞灰中重金属的固化处理更具有优势。     

不同浓度养殖废水对青萍生长能力的影响

为了探讨废水浓度对青萍(Lemna minor)净化能力、生物质和能量积累能力的影响,以猪场养殖废水为供试废水,分析了在不同废水浓度下青萍对废水中总氮(TN)、氨氮和总磷(TP)的净化能力,青萍的生长情况,以及青萍中碳(C)、氮(N)、磷(P)元素含量和热值的变化情况。研究表明,青萍在1%浓度的废水中表现出最高的污染物净化能力。虽然青萍的C、N、P含量和热值均随废水浓度的增加而增加,但是由于相对增长率以1%的废水中生长的青萍最高,青萍的最高生产力、C和能量的固定能力均出现在1%废水浓度培养的青萍中,其次是5%废水浓度培养的青萍。多项式回归分析表明,可以使青萍获得最大C和能量固定能力的废水浓度为3.4%,对应的氨氮浓度为26 mg/L,TP浓度为3.4 mg/L。研究结果为进一步优化高生物质生产、高污染物去除率的养殖废水-浮萍培养体系提供了一定的基础。     

A comparison study on high-temperature water–gas shift reaction over Fe/Al/Cu and Fe/Al/Ni catalysts using simulated waste-derived synthesis gas

A comparative study on Fe/Al, Fe/Al/Cu, and Fe/Al/Ni catalysts in high-temperature water–gas shift reaction (HT–WGS) using simulated waste-derived synthesis gas has been carried out. The metal oxide (Cu and Ni) and aluminum incorporated Fe catalysts were designed to get highly active HT–WGS catalysts. Despite the high CO concentration in the simulated waste-derived synthesis gas, Fe/Al/Cu catalyst exhibited the highest CO conversion (84 %) and 100 % selectivity to CO₂ at a very high gas hourly space velocity (GHSV) of 40,057 h^?1. The outstanding catalytic performance is mainly due to easier reducibility, the synergy effect of Cu and Al, and the stability of the magnetite.     

Iron improving bio-char derived from microalgae on removal of tetracycline from aqueous system

Novel magnetic carbonaceous bio-char was hydrothermal prepared from microalgae under different loadings of iron and its structures and surface chemistry were characterized with Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and nitrogen adsorption-desorption isotherm (BET). The morphology of bio-char changed from sheet to particle as iron loading increased and its surface area also increased. When 3.0 g of dried microalgae and 6.0 mmol iron salt ((NH₄)₂SO₄·FeSO₄·6H₂O) were mixed and treated, the obtained bio-char possessing the highest amount of oxygen-containing functional groups resulted in the best adsorption performance on tetracycline (TC). This adsorption process was fitted to Langmuir adsorption isotherm and the maximum adsorption capacity was 95.86 mg/g, which is higher than other bio-char reported. The iron loading contributed to the higher adsorption capacity of bio-char, which may be due to three factors, the high surface area, more hydrogen bonding, and bridging effects of the structural Fe for TC. Our data suggest that bio-char may have more important role in stabilization of pollutants in the environment.     

Effect of organic amendments on the mobility of trace elements in phytoremediated techno-soils: role of the humic substances

The efficiency of aided phytostabilization using organic amendments such as ramial chipped wood (RCW) and composted sewage sludge (CSS) was studied on contaminated techno-soils, on nine experimental plots. The objective was to characterize the role of fulvic (FA) and humic acids (HA) on the mobilization of trace elements, specifically As, Cu, Mo, Pb and Zn. Results showed that the addition of CSS increased the total organic carbon and nitrogen content more than with RCW and as a result, the C/N ratio in the CSS soil was higher than in the RCW and non-amended (NE) soil, reflecting the high decomposition of soil organic matter in the CSS soil compared with the other soils. The RCW and CSS amendments increased the hydrogen index (HI) values and the oxygen index (OI) values compared with the NE soil, especially for the soil treated with CSS which contained more aliphatic than aromatic compounds. The addition of CSS to the techno-soil significantly increased the percentage of C _org associated with the HA fractions compared with the RCW and NE soils. The soil amended with CSS showed the highest E ₄/E ₆ ratio and the lowest E ₂/E ₃ ratio of FA. Zn and As were more abundant in the FA fraction than in the HA fraction, whereas Pb, Cu and Mo were more associated to HA than to FA in the treated and untreated soils, which may explain the difference in their mobility and availability.     

含硝基苯、苯胺废水处理的工程实践

采用固定化微生物-曝气生物滤池与铁-炭微电解法联用的工艺方法处理含硝基苯、苯胺的废水。通过培养驯化微生物阶段、半负荷进水阶段、满负荷进水阶段的调试运行,表明:当进水CODCr<1 000mg/L、硝基苯<120mg/L、苯胺<30mg/L时,出水可达到CODCr<300mg/L、硝基苯<5mg/L、苯胺<5mg/L的设计要求。铁-炭微电解法在pH值为3～4时,对废水有一定的脱色作用,但pH值升高后脱色效果不明显。