浙江经验:"三生统筹"理念下的农村环境综合整治

浙江是我国农村现代化进展较快的省,也是农村环境问题较为突出的省.浙江省按照"三生统筹"理念,政府和市场各尽所能,重点推进了乡镇企业污染集中治理,实施了以农村聚居点环境综合整治为主题的"万村整治,千村示范"工程以及生态农业促进计划,在解决农村三类环境污染问题上积累了若干经验:对于乡镇企业以及集约化畜禽养殖场的污染问题,通过产业布局调整和进园、市场化、集中治理机制解决;对于农村聚居点的环境污染问题,采取资源、能源、环境问题统筹,政府投资和民营资金介入统筹的办法解决;对于农业面源污染问题,通过提高化肥、农药利用率及推行绿色食品管理体系等前置手段解决.在我国农村现代化进程迅速的今天,"浙江经验"对其他省市的借鉴意义明显.     

TiO2/活性炭催化剂对4-CP的吸附和光催化活性

采用常压金属有机物化学气相沉积技术在活性炭表面沉积构成纳米TiO2催化剂,XRD分析表明,沉积在活性炭表面的TiO2为锐钛矿晶型.TEM分析表明负载量为8%(wt)时,TiO2颗粒的粒径为10-20nm;载体负载前后BET面积仅改变了6%,表明负载TiO2后对活性炭的结构影响不大.利用Langmuir-Hinshelwood动力学模型探讨了TiO2/活性炭催化剂对4-CP的吸附行为和光催化活性之间的关系,求出4-CP降解反应速率常数Kr,在紫外光照条件下催化剂对4-CP的吸附明显增强.     

Abundance and removal of antibiotic resistance genes (ARGs) in the rearing environments of intensive shrimp aquaculture in South China

Although research regarding antibiotic resistance genes (ARGs) in aquaculture environments has gained increasing scientific interest, further studies are required to understand the abundances and removal mechanisms of ARGs during the entire rearing period of shrimp aquaculture. Thus, in this study, abundances, distributions and removal rates of ARGs in different environmental compartments of intensive shrimp farms in South China were investigated during the entire rearing period. The results indicated that sul1 and cmlA were the predominant ARGs in the water and sediment samples. Additionally, the total abundance of ARGs was higher in shrimp pond water than in the source water and farm effluent. Moreover, sediment samples indicated significantly higher ARG abundances than water samples from the shrimp ponds (P?<?0.05). Environmental factors were found to significantly affect the distribution of ARGs in shrimp rearing environments. Furthermore, stable ponds aided the removal of ARGs from shrimp pond water. This study accounted for temporal variations in ARG abundances as well as removal of ARGs in different environmental compartments during the entire shrimp rearing period. However, additional research is required to optimize the water treatment process for removal of ARGs from the aquaculture.     

Study on the denitrification performance of FexLayOz/activated coke for NH3-SCR and the effect of CO escaped from activated coke at mid-high temperature on catalytic activity

Currently, activated coke is widely used in the removal of multiple pollutants from industrial flue gas. In this paper, a series of novel Fe_xLa_yO_z/AC catalysts was prepared by the incipient wetness impregnation for NH₃-SCR denitrification reaction. The introduction of Fe-La bimetal oxides significantly improved the denitrification performance of activated coke at mid-high temperature, and 4% Fe_0.3La_0.7O_1.5/AC exhibited a superior NO_x conversion efficiency of 90.1% at 400 °C. The catalysts were further characterized by BET, SEM, XRD, Raman, EPR, XPS, FTIR, NH₃-TPD, H₂-TPR, et al., whose results showed that the perovskite-type oxide of LaFeO₃ and oxygen vacancies were produced on the catalysts’ surfaces during roasting. Fe-La doping enhanced the amount of acid sites (mainly Lewis and other stronger acid sites) and the content of multifarious oxygen species, which were beneficial for NO_x removal at mid-high temperature. Moreover, it was investigated that the effect of released CO from activated coke at mid-high temperature on the NO_x removal through the lifetime test, in which it was found that a large amount of CO produced by pyrolysis of activated coke could promote the NO_x removal, and long-term escaping of CO on the activated coke carrier did not have a significant negative impact on catalytic performance. The results of the TG-IR test showed that volatile matter is released from the activated coke while TG results showed that the weight loss rate of 4% Fe_0.3La_0.7O_1.5/AC only was 0.0015~0.007%/min at 300–400 °C. Hence, 4% Fe_0.3La_0.7O_1.5/AC had excellent thermal stability and denitrification performance to be continuously used at mid-high temperature. Finally, the mechanisms were proposed on the basis of experiments and characterization results.

     

微波消解-流动注射分光光度法测定总氮和总磷

以碱性过硫酸钾溶液为消解液,采用微波消解-流动注射分光光度法测定水中总氮和总磷。在碱性过硫酸钾溶液中氢氧化钠质量浓度为9.6g/L、微波功率为320W、消解管长度为16m的条件下,总氮和总磷的检出限分别为0.040m g/L和0.020mg/L,线性范围分别为0.040～3.500mg/L和0.020～2.500mg/L,相对标准偏差分别为1.6%和1.0%。微波消解-流动注射分光光度法应用于河水、湖水、化工废水等实际水样中总氮和总磷的测定,加标回收率分别为95.7%～98.1%和97.2%～102.2%。     

两种表面活性剂对剩余污泥产酸影响的比较研究

在批式反应器中研究了常温下2种(两性和阳离子)表面活性剂对剩余污泥产酸的影响,结果表明,2种表面活性剂均能较大幅度地提高剩余污泥生产有机酸的产量.在污泥发酵的第4天,0.1g·g-1(表面活性剂与污泥干重比,下同)的两性和阳离子表面活性剂可分别使剩余污泥生产有机酸的浓度达到226.4和861.4 mg·L-1(以COD计,下同),而空白试验中生成的有机酸浓度仅为3.2 mg·L-1.同时,剩余污泥的有机酸产量随表面活性剂加入量的增加而增加.当表面活性剂的加入量低于0.2 g·g-1时,用两性表面活性剂处理的剩余污泥中有机酸浓度仅为用阳离子表面活性剂处理的剩余污泥中有机酸浓度的50%;当表面活性剂的加入量增至0.3 g·g-1时,两者的有机酸最大产量接近.此外,表面活性剂的种类和加入量对有机酸的组成分布也有一定的影响.     

直链烷基苯磺酸盐促进剩余污泥产生短链脂肪酸的研究

采用批试试验的方法研究了十二烷基苯磺酸钠(C12-LAS)对剩余污泥在厌氧发酵过程中产生的短链脂肪酸(SCFAs)的影响.结果表明,C12-LAS的投加极大地提高了剩余污泥厌氧发酵过程中的SCFAs产量.当C12-LAS加入量低于0.1g·g-1时,SCFAs产量随着C12-LAS加入量的增加而增加,然而,当C12-LAS加入量高于0.1g·g-1时,SCFAs产量反而有所降低.从污泥产酸量以及经济成本考虑,C12-LAS的最佳投加量为0.02g·g-1,此时剩余污泥的SCFAs最大产量出现在第6天.进一步的研究表明,C12-LAS不仅促使大量的碳水化合物和蛋白质脱离污泥颗粒并溶解到液相中,而且抑制了产甲烷菌的活性.尽管剩余污泥经历着酸化过程,但由于其释放出大量的NH4 -N,污泥在整个厌氧发酵过程中的pH值逐渐升高.     

制备方法对MgAl水滑石衍生氧化物负载钯催化剂丙烷完全氧化活性的影响

以沉积沉淀法(DP)、浸渍法(IM)和共沉淀法(CP)制备MgAl水滑石衍生氧化物负载钯催化剂,用ICP、XRD、SEM、TEM、EDS、TPR以及比表面测定等手段对催化剂进行了表征.ICP和XRD数据表明用上述3种方法均可成功制备水滑石为前体载钯催化剂.SEM、TEM、EDS数据表明不同方法制备的样品具有不同的形貌以及钯在其中的分散度.综合各类表征数据可知Pd在催化剂中暴露的活性位是影响其活性的主要因素.     

Ti/Cu交联累托石光催化氧化处理硝基苯废水研究

以钛酸丁酯为钛源,掺杂铜(CuCl2)制备交联剂.制得柱状Ti/Cu交联累托石,结合其吸附特性并通过其在光催化氧化条件下处理含硝基苯有机废水.在pH=9,交联累托石用量为30 g/L,一根20 W紫外灯光辐照2 h的处理条件下,硝基苯由73.81 mg/L降至3.17 mg/L,去除率达到95.71%,优于GB-8978-1996三级标准,用其处理含硝基苯工业废水,COD去除率为83.73%,由4800 mg/L降至530.4 mg/L,硝基苯去除率达92.3l%,由10.32 mg/L降至0.79 mg/L,小于GB-8978-1996-级标准.     

Structure optimization and annual performance analysis of the lens-walled compound parabolic concentrator

The primary lens-walled compound parabolic concentrator (lens-walled CPC) has a significant advantage of a larger half acceptance angle as a static solar concentrator, but it also has a drawback of a low optical efficiency. In order to overcome this drawback, in this article, series of structure parameters were investigated and compared to further improve the optical efficiency within the half acceptance angle combined with the material properties. The average optical efficiencies of the improved lens-walled CPCs could achieve more than 82% within the half acceptance angle of 35?. Experiments were adopted to verify the credibility and validity of the simulation. Moreover, annual performance of the lens-walled CPCs comparison with that of the mirror CPC for Nottingham was analyzed. Results show that the improved lens-walled CPC has a higher optical performance for actual building application.