Brownfield Sites Remediation Technology Overview,Trends, and Opportunities in China

Over decades of economic development, China's industrialization has led to significant environmental issues due to unregulated discharges into air, water, and soil. As cities continue to expand (i.e., urbanization trend) and awareness/concerns about environmental pollution rises, many industrial facilities along the edge of or within the city boundaries have been relocated or closed. This urbanization trend leaves behind idled and abandoned land that is contaminated from the former industrial activities and unregulated discharges. China released its first nationwide soil quality survey in April 2014, and the survey suggests that soil conditions in China represent a significant challenge. China has encouraged local engineering firms to demonstrate soil treatment technologies through pilot‐scale studies, but the outcomes of many demonstrations have not been promising due to the lack of remediation experience and underdeveloped technical guidelines that are needed to guide the remediation processes. During the past decade, some local soil remediation experience has been established, but it is limited for certain technologies that address their primary contaminants of concern: heavy metals and persistent organic pollutants. In 2014, national technical guidelines were published regarding environmental investigation, risk assessment, monitoring, and remediation; however, regulations and funding systems are still underdeveloped. Thus, the remediation processes that should maximize economic and environmental benefits are not streamlined. This article provides an overview of the latest regulatory developments, remediation technologies applied, technology trends, and market opportunities in China. The provided information aims to allow international remediation practitioners to better understand and appreciate this unique and emerging remediation market, which is growing fast, and to highlight the importance of developing a sustainable model that not only provides for cleanup of the environment but also supports economic development. ©2015 Wiley Periodicals, Inc.     

Ambient Air Particulates Bound Mercury Hg(p) Study Among Four Crops (Rice,White Cabbage,Arden Lettuce,and Gynura) at a Characteristic Sampling Site

The main purpose of this study was to monitor ambient air particulates and particulate-bound Hg (Hg[p]) compositions in different crops in the coastal zone in the Taichung, Taiwan, area at a sampling site during 2013 October to 2013 December. In addition, a direct mercury analyzer (DMA-80) was used to directly detect the concentration with measured results by the regression equation of Hg in the ambient air. The results indicated that: 1) the mean values of ambient air Hg(p) compositions in rice displayed no significant differences for weeks one, two, and three versus those of the other crops (white cabbage, Arden lettuce, and Gynura procumbens); 2) for white cabbage, the higher the humidity, the lower the average ambient air Hg(p) compositions that were obtained, a phenomenon that was also reflected on the crops of white cabbage and G. procumbens; 3) Arden lettuce displayed no significant differences in the leaf Hg(p) compositions during weeks one, two, and three; however, the stem portions displayed significant differences in Hg(p) compositions during weeks two and three; and 4) the Spearman statistical method showed the mean differences for ambient air Hg(p) at the Long-jing sampling site (coastal regions) with four different crops (rice, white cabbage, Arden lettuce, and Gynura) in central Taiwan. The results further revealed no significant differences in mean values.     

Anaerobic degradation of nonylphenol in soil

This study investigated the effects of various factors on the anaerobic degradation of nonylphenol (NP) in soil. The results show that the optimal pH for NP degradation was 7.0 and that the degradation rate was enhanced when the temperature was increased. The addition of compost enhanced NP degradation. The individual addition of the electron donors lactate, acetate, and pyruvate inhibited NP degradation. The high-to-low order of NP degradation rates under three anaerobic conditions was sulfate-reducing conditions > methanogenic conditions > nitrate-reducing conditions. The results show that sulfate-reducing bacteria, methanogen, and eubacteria are involved in the anaerobic degradation of NP, with sulfate-reducing bacteria being a major component of the soil. Of the anaerobic strains isolated from the soil samples, strain AT3 expressed the best ability to biodegrade NP.     

Electrochemical oxidation of PFOA and PFOS in concentrated waste streams

The electrochemical oxidation (EO) of environmentally persistent perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) with a Magnéli phase Ti₄O₇ electrode was investigated in this study. After 3 hours (hr) of electrolysis, 96.0 percent of PFOA (10 milligrams per liter [mg/L] in 100 milliliters [mL] 100 millimolar [mM] Na₂SO₄ solution) was removed following pseudo first‐order kinetics (k = 0.0226 per minute [min]) with the degradation half‐life of 30.7 min. Under the same treatment conditions, PFOS (10 mg/L in 100 mL 100 mM Na₂SO₄ solution) removal reached 98.9 percent with a pseudo first‐order degradation rate constant of 0.0491/min and the half‐life of 14.1 min. Although, the degradation of PFOA was slower than PFOS, when subjected to EO treatment in separate solutions, PFOA appeared to degrade faster than PFOS when both are present in the same solution, indicating possible competition between PFOA and PFOS during Ti₄O₇ anode‐based EO treatment with PFOA having the competitive advantage. Moreover, the EO treatment was applied to degrade highly concentrated PFOA (100.5 mg/L) and PFOS (68.6 mg/L) in ion‐exchange resin regenerant (still bottom) with high organic carbon content (15,800 mg/L). After 17‐hr electrolysis, the total removal of PFOA and PFOS was 77.2 and 96.5 percent, respectively, and the fluoride concentration increased from 0.84 mg/L to 836 mg/L. Also, the dark brown color of the original solution gradually faded during EO treatment. In another test using still bottom samples with lower total organic carbon (9,880 mg/L), the PFOA (15.5 mg/L) and PFOS (25.5 mg/L) concentrations were reduced to levels below the limits of quantification after 16‐hr treatment. In addition, the performance of EO treatment using different batch reactor setups was compared in this study, including one‐sided (one anode:one cathode) and two‐sided (one anode:two cathodes) setups. The two‐sided reactor configuration significantly enhanced the degradation efficiency, likely due to the larger anode area available for reactions.     

Investigation of Mtbe and Aromatic Compound Concentrations at a Gas Service Station

Methyl tert-butyl ether (MTBE) has been used as a fuel additive at levels of 2–11% in Taiwan for the past decade. The purpose of this additive is to enhance the octane, replace the use of lead-based anti-knock gasoline additives and reduce aromatic hydrocarbons. However, it is possible that oxygenated fuel has a potential health impact. To determine the air quality impact of MTBE, measurements were made of ambient MTBE and other gasoline constituents at a service station. Additionally, environmental conditions (wind speed, wind direction, and temperature, etc.) that could affect concentrations of emission constituents were measured. Gas samples were analyzed for target MTBE and volatile organic compounds, e.g., benzene and toluene. Ambient samples were collected using Tenax adsorbent tubes for mass spectrometric analysis at a service station located in Changhua County, Taiwan. The resulting measured ambient air concentrations were compared with Taiwans regulatory standards for hazardous air pollutants. Subsequently, the factors controlling the formation of high-VOC levels at the service station and in the residential neighborhoods were identified. Additionally, the results can provide the Environmental Protection Agency (EPA) of Taiwan with useful information and prompt them to mandate this gas service station to install a refueling vapor recovery system.     

Respirometric Evaluation by Graphical Analysis for Microbial Systems

Analysis of respirometric graphs for system diagnosis has recently drawn much attention due to the nature of the test being a fast method with reliable oxygen uptake (Ou) data. In this study, a new graphical analysis procedure is proposed, using the oxygen uptake rate (OUR) vs. Ou respirogram because of its distinct characteristics that provides easy visual inspection. The OUR plot is typically divided into two respiration phases, and each one of these phases can be simulated by a previously derived analytical equation. Based on the 2-phase model, five characteristic parameters (CPs) were derived for the OUR respirogram. Mathematically the 5 CPs can be related to the system parameters (SPs), including the four Monod kinetic parameters and two operating conditions (initial substrate and biomass concentration). Sensitivity analyses were then conducted to assess the 5 CPs for the level of effect caused by system parameters (SPs). This study also conducted respirometric tests under batch operation to evaluate the applicability of the graphical analysis method. Based on the 5 CPs estimated from the OUR respirogram of the tests, it can be concluded that respirometric tests normally experience the problems associated with initial lag, non-uniform seeding, and inadequate mixing.     

Reusing pretreated desulfurization slag to improve clinkerization and clinker grindability for energy conservation in cement manufacture

The purpose of this study was to combine the physical pretreatments of grinding, sieving, and magnetic-separation processes to reclaim iron-rich materials from the desulfurization slag, and to use the remainder for cement clinker production. The iron-rich materials can be separated out efficiently by grinding for 30 min and sieving with a 0.3 mm mesh. The non-magnetic fraction of the particles smaller than 0.3 mm was in the majority, and proved to be suitable for use as a cement raw material. The raw mixes prepared with a pretreated desulfurization slag had a relatively high reactivity, and the temperature at which alite forms was significantly reduced during the clinkerization process. The clinkers produced with 10% desulfurization slag had a high level of alite and good grindability. Generally, the improvements in clinkerization and clinker grindability are beneficial to energy conservation in cement manufacture.     

Enhancement of the polynomial functions response surface model for real-time analyzing ozone sensitivity

• The calculation process and algorithm of response surface model (RSM) were enhanced. • The prediction errors of RSM in the margin and transition areas were greatly reduced. • The enhanced RSM was able to analyze O₃-NO_x-VOC sensitivity in real-time. • The O₃ formations were mainly sensitive to VOC, for the two case study regions. Quantification of the nonlinearities between ambient ozone (O₃) and the emissions of nitrogen oxides (NO_x) and volatile organic compound (VOC) is a prerequisite for an effective O₃ control strategy. An Enhanced polynomial functions Response Surface Model (Epf-RSM) with the capability to analyze O₃-NO_x-VOC sensitivities in real time was developed by integrating the hill-climbing adaptive method into the optimized Extended Response Surface Model (ERSM) system. The Epf-RSM could single out the best suited polynomial function for each grid cell to quantify the responses of O₃ concentrations to precursor emission changes. Several comparisons between Epf-RSM and pf-ERSM (polynomial functions based ERSM) were performed using out-of-sample validation, together with comparisons of the spatial distribution and the Empirical Kinetic Modeling Approach diagrams. The comparison results showed that Epf-RSM effectively addressed the drawbacks of pf-ERSM with respect to over-fitting in the margin areas and high biases in the transition areas. The O₃ concentrations predicted by Epf-RSM agreed well with Community Multi-scale Air Quality simulation results. The case study results in the Pearl River Delta and the north-western area of the Shandong province indicated that the O₃ formations in the central areas of both the regions were more sensitive to anthropogenic VOC in January, April, and October, while more NO_x-sensitive in July.     

Assesment of disinfection by‐products removal by ozonation coupled with adsorption

This research work was performed to evaluate ozonation and granular activated carbon adsorption processes from the view‐point of controlling the formation of disinfection by products (DBPs). Both the humic acid and raw water were first preozonated and then adsorbed on the activated carbon to assess the potency for removal of total organic carbon (TOC) and DBPs. The disinfection by‐product including THMs and HAAs, in principle, can be successfully removed through a use of the ozonation and granular activated carbon (GAC) adsorption processes. However, in practice dealing with the raw water, it is necessary to introduce the pilot‐plant to obtain the design and operation guidelines for the water treatment plant through the ICA (Instrumentation Control and Automation) program in our future research work.     

The occurrence of disinfection by‐products in Taiwan drinking water

In this study, samples were taken from six conventional water treatment plants for disinfection by‐products analysis. Results from the analysis revealed that trihalomethanes (THMs) concentrations in all samples were below regulatory levels (100 μg/L). Although the national standard for haloacetic acids (HAA5) has not yet been promulgated in Taiwan, samples from two water plants contained HAA5 concentrations exceeding the USEPA limit (MCL of HAA5 of Stage 1, 60 μg/L). THMs and HAA5 were found to be the major disinfection by‐products in all water treatment plants. It was noted that the concentration of HAA5 in most samples was higher than that of the trihalomathanes. However, the formation potential of THM (THMFP) was found to be higher than that of HAA (HAAFP). Good correlation also was found between THMFP (or THMFP) and HAA5 (or THMs). In evaluating the performance of the treatment processes, it was found that conventional water treatment processes followed by activated carbon were effective in removing disinfection by‐products (DBPs) from source water with pre‐ozonation. The treatment processes were at their optimum performance in removing contaminants when O₃/TOC₀ was held at 0.75.