Fate of bromine in pyrolysis of printed circuit board wastes

Behavior of Br in pyrolysis of the printed circuit board waste with valuable copper and oil recycling has been studied in the present work. Experimentally, pyrolysis of the printed circuit board waste generated approximately 40.6% of oils, 24.9% of noncondensible gases and 34.5% of solid residues that enriched in copper (90-95%). The cuts of the oils produced from pyrolysis of the printed circuit board waste into weighted boiling fraction were primarily light naphtha and heavy gas oil. Approximately 72.3% of total Br in the printed circuit board waste were found in product gas mainly as HBr and bromobenzene. However, by extended X-ray absorption fine structural (EXAFS) spectroscopy, Cu-O and Cu-(O)-Cu species with bond distance of 1.87 and 2.95 A, respectively, were observed in the solid residues. Essentially, no Cu-Br species was found.     

Characteristics of microbial aerosols released from chicken and swine feces

Bioaerosols generated during livestock and poultry production are significant occupational hazards. This study investigates the characteristics of bioaerosols released from animal feces. Fresh feces from pigs and chickens were obtained and tested in a controlled-environment facility. Airborne viable (culturable) bacteria and fungi were sampled hourly for 48 hr. The predominant species were identified via polymerase chain reaction analysis. The number of bacterial colonies released from chicken feces increased gradually, peaked at approximately 20 hr, and remained relatively constant to test end; however, the bacterial colonies released from swine feces did not increase significantly. The chicken feces released significantly (P < 0.05) more bacterial aerosols than swine feces over 40 hr, by approximately 1 order of magnitude. However, the difference in total fungal aerosols released from the two feces types was relatively small (30-40%) and insignificant (P > 0.05). Aerosols sized between approximately 0.65 and 1.1 microm were predominant for bacteria, whereas aerosols sized between approximately 2.1 and 3.3 microm prevailed for fungi. Genera Stenotrophomonas were the predominant bacterial aerosols, whereas Cladosporium and Acremonium accounted for the greatest amounts of fungi from chicken and swine feces, respectively. More than 1000 culturable bacterial colonies can be released from 1 g of chicken feces per hour, and approximately 80% of these bioaerosols are respirable. Most bacterial aerosols released from swine and chicken feces were opportunistic human pathogens; thus, the significance of their presence warrants further investigations.     

COVID-19 fear and volatility index movements: empirical insights from ASEAN stock markets

Environmental Science and Pollution Research - This research aims to look into the effect of COVID-19 on emerging stock markets in seven of the Association of Southeast Asian Nations’...     

Assessment of heavy metal bioavailability in contaminated sediments and soils using green fluorescent protein-based bacterial biosensors

A green fluorescent protein (GFP)-based bacterial biosensor Escherichia coli DH5alpha (pVLCD1) was developed based on the expression of gfp under the control of the cad promoter and the cadC gene of Staphylococcus aureus plasmid pI258. DH5alpha (pVLCD1) mainly responded to Cd(II), Pb(II), and Sb(III), the lowest detectable concentrations being 0.1 nmol L(-1), 10 nmol L(-1), and 0.1 nmol L(-1), respectively, with 2h exposure. The biosensor was field-tested to measure the relative bioavailability of the heavy metals in contaminated sediments and soil samples. The results showed that the majority of heavy metals remained adsorbed to soil particles: Cd(II)/Pb(II) was only partially available to the biosensor in soil-water extracts. Our results demonstrate that the GFP-based bacterial biosensor is useful and applicable in determining the bioavailability of heavy metals with high sensitivity in contaminated sediment and soil samples and suggests a potential for its inexpensive application in environmentally relevant sample tests.     

Reductive dechlorination for remediation of polychlorinated biphenyls

Technologies such as thermal, oxidative, reductive, and microbial methods for the remediation of polychlorinated biphenyls (PCBs) have previously been reviewed. Based on energy consumption, formation of PCDD/F, and remediation efficiency, reductive methods have emerged as being advantageous for remediation of PCBs. However, many new developments in this field have not been systematically reviewed. Therefore, reductive technologies published in the last decade related to remediation of PCBs will be reviewed here. Three categories, including catalytic hydrodechlorination with H₂, Fe-based reductive dechlorination, and other reductive dechlorination methods (e.g., hydrogen-transfer dechlorination, base-catalyzed dechlorination, and sodium dispersion) are specifically reviewed. In addition, the advantages of each remediation technology are discussed. In this review, 108 articles are referenced.     

A Feasibility Study on the Predictive Emission Monitoring System Applied to the Hsinta Power Plant of Taiwan Power Company

Abstract

The continuous emission monitoring system (CEMS) can monitor flue gas emissions continuously and instantaneously. However, it has the disadvantages of enormous cost, easily producing errors in sampling periods of bad weather, lagging response in variable ambient environments, and missing data in daily zero and span tests and maintenance. The concept of a predictive emission monitoring system (PEMS) is to use the operating parameters of combustion equipment through thermodynamic or statistical methods to construct a mathematic model that can predict emissions by a computer program. The goal of this study is to set up a PEMS in a gas-fired combined cycle power generation unit at the Hsinta station of Taiwan Power Co. The emissions to be monitored include nitrogen oxides (NO_x) and oxygen (O₂) in flue gas. The major variables of the predictive model were determined based on the combustion theory. The data of these variables then were analyzed to establish a regression model. From the regression results, the influences of these variables are discussed and the predicted values are compared with the CEMS data for accuracy. In addition, according to the cost information, the capital and operation and maintenance costs for a PEMS can be much lower than those for a CEMS.     

Tributyltin distribution and producing androgenic activity in water,sediment, and fish muscle

This study investigated the concentrations of Tributyltin (TBT) in water, sediment, and fish muscle samples taken from Kaohsiung Harbor and Kaoping River estuary, Taiwan. TBT concentrations in water and sediment samples ranged from less than 18.5 to 34.1 ng Sn L^?1 and from 2.44 to 29.7 ng Sn g^?1 weight per weight (w/w), respectively. Concentrations in the TBT‐contaminated fish muscle samples ranged from 10.8 to 79.6 ng Sn g^?1 w/w. The TBT concentrations in fish muscle were higher than those in water and sediment samples. The fish muscle/water TBT bioconcentration factor (BCF) ranged from 590 to 3363 L kg^?1. Additionally, the water samples were assessed for androgenic activity with an MCF7‐AR1 human breast cancer cell line. The androgenic activity ranged from 0.94 to 3.1 ng‐dihydrotestosterone per litre water (ng‐DHT L^?1). Higher concentrations of TBT in water and sediment samples occurred in the dry season, but the androgenic activity had higher values in the rainy season.     

Prenatal diagnosis of holoprosencephaly in two fetuses with der (7)t(1;7)(q32;q32)pat inherited from the father with double translocations

The presence of two independent translocations in one person is rare. Herein, we report the prenatal diagnosis of two sibling fetuses with holoprosencephaly, whose father is a carrier of double translocations. The karyotype of the father is 46,XY, t(1;7) (q32;q32), t(14,15) (q32.1;q26.3). The two fetuses had variable facial dysmorphisms and identical cytogenetic abnormality—a derivative (7) t(1;7) (q32;q32) inherited from the father. The proband 1 showed a small mouth, a single median eye and a proboscis above the eye, while the proband 2 showed hypotelorism, a flat nose, cleft lip and cleft palate. Both fetuses also had alobar holoprosencephaly. Haploinsufficiency of the sonic hedgehog gene at 7q36 does account for the occurrence of holoprosencephaly in the two fetuses with a deletion of distal 7q (7q32 → qter). Copyright © 2003 John Wiley & Sons, Ltd.