Revealing the characteristics of dissolved organic matter in urban runoff at three typical regions via optical indices and molecular composition

Dissolved organic matter (DOM) plays a major role in ecological systems and influences the fate and transportation of many pollutants. Despite the significance of DOM, understanding of how environmental and anthropogenic factors influence its composition and characteristics is limited, especially in urban stormwater runoff. In this article, the chemical properties (pollutant loads, molecular weight, aromaticity, sources, and molecular composition) of DOM in stormwater extracted from three typical end-members (traffic, residential, and campus regions) were characterized by UV–visible (UV–vis) spectroscopy, excitation-emission matrix spectroscopy combined with parallel factor analysis (EEM-PARAFAC), and ultra-performance liquid chromatography quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF-MS). There are three findings: (1) The basic properties of DOM in stormwater runoff varied obviously from three urban fields, and the effect of initial flush was also apparent. (2) The DOM in residential areas mainly came from autochthonous sources, while allochthonous sources primarily contributed to the DOM in traffic and campus areas. However, it was mainly composed of terrestrial humic-like components with CHO and CHON element composition and HULO and aliphatic formulas. (3) The parameters characterizing DOM were primarily related to terrestrial source and aromaticity, but their correlations varied. Through the combination of optical methods and UPLC-Q-TOF spectrometry, the optical and molecular characteristics of rainwater are effectively revealed, which may provide a solid foundation for the classification management of stormwater runoff in different urban regions.     

电解催化降解苯胺过程的减秩因子法分析

本文用减秩分析法（RAFA）处理电解催化降解苯胺过程中的动力学谱-光谱组成的两维数据，分析结果表明，当以反应速率常数为优化对象，以消去反应物的信息作为减秩手段时，RAFA可以获得两个最优解，分别对应于两步速率常数（分别为0.0437和和0.0175min^-1)，在获得动力学参数的前提下，利用最小二乘回归法可解出包括中间体在内的各组分的吸收光谱，结果还发现七胺降解过程中有一种表现中间体存在，降解过程符合两步一级反应模型。     

Characterization of particulate products for aging of ethylbenzene secondary organic aerosol in the presence of ammonium sulfate seed aerosol

Aging of secondary organic aerosol(SOA) particles formed from OH– initiated oxidation of ethylbenzene in the presence of high mass(100–300 μg/m~3) concentrations of(NH_4)_2SO_4seed aerosol was investigated in a home-made smog chamber in this study.The chemical composition of aged ethylbenzene SOA particles was measured using an aerosol laser time-of-flight mass spectrometer(ALTOFMS) coupled with a Fuzzy C-Means(FCM) clustering algorithm.Experimental results showed that nitrophenol,ethyl-nitrophenol,2,4-dinitrophenol,methyl glyoxylic acid,5-ethyl-6-oxo-2,4-hexadienoic acid,2-ethyl-2,4-hexadiendioic acid,2,3-dihydroxy-5-ethyl-6-oxo-4-hexenoic acid,1H-imidazole,hydrated N-glyoxal substituted1H-imidazole,hydrated glyoxal dimer substituted imidazole,1H-imidazole-2-carbaldehyde,N-glyoxal substituted hydrated 1H-imidazole-2-carbaldehyde and high-molecular-weight(HMW) components were the predominant products in the aged particles.Compared to the previous aromatic SOA aging studies,imidazole compounds,which can absorb solar radiation effectively,were newly detected in aged ethylbenzene SOA in the presence of high concentrations of(NH_4)_2SO_4seed aerosol.These findings provide new information for discussing aromatic SOA aging mechanisms.     

废旧电路板破碎机设计研究

电路板因为具有韧性高、多组分的特性,在处理过程中不易被破碎。辊式破碎机具有结构简单、工作可靠、能耗低等特点,可用于废旧电路板的粗碎环节。该类辊式破碎机主要由电机、减速器、轴、齿辊、齿轮等组成,齿盘的齿牙形状、尺寸、排列可按电路板物料性质进行设计。首先通过设计计算并使用UG NX软件建立虚拟样机,分析了片状物料在破碎中受力情况;再使用Nastran模块对辊式破碎机的重要部件齿盘进行有限元分析,得出齿盘上承受载荷比较大的位置并对此提出了强化措施。     

利用生物滤池对填埋场甲烷减排的研究

填埋场是一个巨大的人为甲烷释放源,它对全球的温室效应的贡献非常巨大。生物滤池是一种非常具有潜力的大气甲烷减排的方法,它能经济有效地对小型填埋场和封场后的填埋场进行甲烷减排。本文论述了生物滤床的甲烷氧化过程,同时还论述了影响生物滤床甲烷氧化性能的因素,通过对比研究各大因素对生物滤床甲烷氧化性能的影响选出甲烷氧化性能最佳的生物滤床。     

Towards a control model for the highly cybernetic farming ecosystems

Abstract

A dynamic model based on the linear systems theory is developed in designing a highly cybernetic farming strategy to efficiently manage residuals generated in farm ecosystems. A linear cybernetic model would be used to describe the dynamic behavior of resource flow in the farm ecosystem in which the state variables are resource quantities, and the control variables are residual quantities. The controlled process is defined as the controlled management strategy change. Cybernetic mechanism shows the application of residuals as control measures have determinate effects on the controlled process as along as the farming system is observable and controllable in the control sense. To illustrate the model algorithm the idea is applied to simulate the dynamic response of residual phosphorus concentrations in an integrated pig/corn farming system located in the south Taiwan region. General results show that the residual phosphorous concentration is influenced by farming activities which are controlled by a system of gross input and net output parameters. This paper demonstrates using input‐output analysis technique that residuals generated in the farming system is the most important cybernetic variable, so that the proper management of residuals alone has the potential to maintain future productivity and sustainability.     

Use of scalp hair as indicator of human exposure to heavy metals in an electronic waste recycling area

Scalp hair samples were collected at an electronic waste (e-waste) recycling area and analyzed for trace elements and heavy metals. Elevated levels were found for Cu and Pb with geometric means (GMs) at 39.8 and 49.5 μg/g, and the levels of all elements were found in the rank order Pb > Cu ? Mn > Ba > Cr > Ni > Cd > As > V. Besides Cu and Pb, Cd (GM: 0.518 μg/g) was also found to be significantly higher compared to that in hair samples from control areas. Differences with age, gender, residence status and villages could be distinguished for most of the elements. The high levels of Cd, Cu and Pb were likely found to be originated from e-waste related activities, and specific sources were discussed. This study shows that human scalp hair could be a useful biomarker to assess the extent of heavy metal exposure to workers and residents in areas with intensive e-waste recycling activities.     

Cut-off net acid generation pH in predicting acid-forming potential in mine spoils

Acidification of mine wastes can lead to a series of environmental problems, such as acid drainage, heavy metal mobilization, and ecosystem degradation. Prediction of acid-forming potential is one of the key steps in management of sulfide-bearing mine wastes. In this paper, the acid-forming potential of 180 mine waste samples collected from 17 mine sites in China were studied using a net acid generation (NAG) method. The samples contained different contents of total sulfur (ranging from 0.6 to 200 g kg(-1)), pyritic sulfur (ranging from 0 to 100 g kg(-1)), and acid neutralization capacity (ANC, ranging from -41 to 274 kg H2SO4 t(-1)). Samples with high acid-forming potential are generally due to their high sulfur content or low acid neutralization capacity. After the samples were oxidized by H2O2, the amounts of acid generation and the final NAG pH were measured. Results indicated that the final NAG pH gave a well-defined demarcation between acid-forming and non-acid-forming materials. Samples with final NAG pH >or= 5 could be classified as non-acid-forming materials, while those with NAG pH 2.5, but < 5, had low risk of being acid-forming. The confirmation of cut-off NAG pH will be used as a rapid and cost-effective operational monitoring tool for the in-pit prediction of acid-forming potential of mine wastes and classification of waste types.     

How well does XAD resin extraction recover halogenated disinfection byproducts for comprehensive identification and toxicity testing?

Halogenated disinfection byproducts (DBPs) are an unintended consequence of drinking water disinfection, and can have significant toxicity. XAD resins are commonly used to extract and enrich trace levels of DBPs for comprehensive, nontarget identification of DBPs and also for in vitro toxicity studies. However, XAD resin recoveries for complete classes of halogenated DBPs have not been evaluated, particularly for low, environmentally relevant levels (ng/L to low µg/L). Thus, it is not known whether levels of DBPs or the toxicity of drinking water might be underestimated. In this study, DAX-8/XAD-2 layered resins were evaluated, considering both adsorption and elution from the resins, for extracting 66 DBPs from water. Results demonstrate that among the 7 classes of DBPs investigated, trihalomethanes (THMs), including iodo-THMs, were the most efficiently adsorbed, with recovery of most THMs ranging from 50%-96%, followed by halonitromethanes (40%-90%). The adsorption ability of XAD resins for haloacetonitriles, haloacetamides, and haloacetaldehydes was highly dependent on the individual species. The adsorption capacity of XAD resins for haloacetic acids was lower (5%-48%), even after adjusting to pH 1 before extraction. Recovery efficiency for most DBPs was comparable with their adsorption, as most were eluted effectively from XAD resins by ethyl acetate. DBP polarity and molecular weight were the two most important factors that determine their recovery. Recovery of trichloromethane, iodoacetic acid, chloro- and iodo-acetonitrile, and chloroacetamide were among the lowest, which could lead to underestimation of toxicity, particularly for iodoacetic acid and iodo-acetonitrile, which are highly toxic.