Energy performance of European countries by considering the role of forest

Environmental Science and Pollution Research - This paper applies the modified undesirable dynamic data envelopment analysis (DEA) model by considering the role of forest carbon sinks to evaluate...     

Quantification and modelling of 2,4-dinitrotoluene reduction with high-purity and cast iron

Cast iron has been used as a reactive material in permeable reactive barriers (PRBs) for site remediation. While reactions are generally believed to occur on the iron (oxide) surface, a recent study by [Oh, S.Y., Cha, D.K., Chiu, P.C., 2002a. Graphite-mediated reduction of 2,4-dinitrotoluene with elemental iron. Environ. Sci. Technol. 36 (10), 2178-2184] showed that graphite inclusions in cast iron can also serve as reaction sites for 2,4-dinitrotoluene (DNT). These authors also found that graphite-mediated reduction of DNT has a regioselectivity that is different from that for iron surface. In this study, we quantified the observations reported by Oh et al. and examined the role of graphite in cast iron through numerical modelling. Models containing one and two reaction sites were developed to evaluate the mass transfer, sorption and reaction rates for DNT reduction in batch systems containing high-purity and cast iron. Our simulations showed that the regioselectivity, defined as the ratio of the ortho- and para-nitro reduction rate constants, was 0.37+/-0.04 S.E. (S.E.=one estimated standard error) for iron surface and 3.59+/-0.76 S.E. for graphite surface. In the cast iron-water system, we estimated that at least 66+/-2% S.E. of the DNT was reduced on graphite surface, despite the low graphite content and the lower DNT reduction rate with graphite than with iron. Graphite played such an important role because of the rapid adsorption of DNT to graphite. In the batch experiments conducted by Oh et al., external mass transfer was not rate limiting. Surface reaction was the rate-limiting step for DNT reduction on the graphite surface in cast iron, whereas internal mass transfer and/or adsorption and surface reaction were important for high-purity iron.     

A model for pulse jet fabric filters

A new model for pulse jet fabric filtration is proposed. In contrast to the earlier model of Ravin and Humphries, which was formulated on the steady state assumption, the present study is aimed at developing a predictive capability for both transient and steady state operations, taking into account the compression effect of filter cakes. The model's relative simplicity allows frequent updating of the model parameter values, thus improving the accuracy of predictions. As a result, the model is particularly useful in developing control algorithms and designing controllers of pulse jet fabric filtration systems.     

Porous materials produced from incineration ash using thermal plasma technology

This study presents a novel thermal plasma melting technique for neutralizing and recycling municipal solid waste incinerator (MSWI) ash residues. MSWI ash residues were converted into water-quenched vitrified slag using plasma vitrification, which is environmentally benign. Slag is adopted as a raw material in producing porous materials for architectural and decorative applications, eliminating the problem of its disposal. Porous materials are produced using water-quenched vitrified slag with Portland cement and foaming agent. The true density, bulk density, porosity and water absorption ratio of the foamed specimens are studied here by varying the size of the slag particles, the water-to-solid ratio, and the ratio of the weights of the core materials, including the water-quenched vitrified slag and cement. The thermal conductivity and flexural strength of porous panels are also determined. The experimental results show the bulk density and the porosity of the porous materials are 0.9–1.2 g cm^?3 and 50–60%, respectively, and the pore structure has a closed form. The thermal conductivity of the porous material is 0.1946 W m^?1 K^?1. Therefore, the slag composite materials are lightweight and thermal insulators having considerable potential for building applications.     

A CLOSED WATER REUSE SYSTEM FOR POWER PLANT COOLING AND DIGESTER HEATING1

ABSTRACT: A model consisting of closed water reuse and productive use of various types of wastes for energy generation is presented. The sewage after treatment would be used as the cooling water for power plants, and the condenser discharge therefrom be used as heating water for sludge digesters. The water is then purified for municipal water supply for continuous use. The advantages of this system are that water resources and energy are conserved while various types of wastes including waste heat are controlled. With a preliminary system analysis, it appears that the design for power plant based on the total heating value of wastes and digester capacity based on sewage sludge generation is feasible in terms of acquisition and full utilization of various types of wastes as generated in a single metropolitan area. The system as shown in this design is in balance among various factors such as the generation rate of municipal refuse, municipal sewage, waste heat in the condenser discharge, and raw sewage sludge.     

Male reproductive biology of the red frog crab,Ranina ranina,off Hachijojima,Izu Islands,Japan

Male red frog crabs, Ranina ranina, were collected year round in 1990 and 1991 off Hachijojima for histological study of the reproductive system and cycle. The testis containing the lobules and seminiferous ducts is surrounded by connective tissue. The seminiferous duct connects to the anterior end of the vas deferens, which can be histologically divided into three portions similar to one another in appearance. It was surrounded by fibrous connective tissue, muscle fibrils and columnar epithelium. Muscle fibrils were absent in the anterior portion. Multiple sperm masses were not formed in the vas deferens and ejaculatory duct, but the sperm mass was covered with a capsule composed of two layers. The outer layer of the capsule was periodic acid Schiff (PAS)-positive, but the inner layer was negative. Both layers were Alcian Blue negative, except the vacuoles in the outer layer that were stained blue. The small round androgenic gland was attached to the posterior end of the vas deferens of the coxa of the eighth thoracic appendage. The ejaculatory duct was distinguishable from the vas deferens by the absence of columnar epithelium and the presence of thick longitudinal muscle fibers. Spermatogenesis was histochemically examined. The acrosomal vesicle appeared to be derived from PAS-positive vesicles in the cytoplasm of the spermatid at the early stage of spermiogenesis. The arms were positive to the Feulgen reaction and the subacrosomal region was negative to PAS. Seasonal changes in reproductive cycle were inconspicuous histologically and microscopically. Sperm were always present in the testis and vas deferens throughout the year and occupied 5.1 to 19.6% of testis observed in cross sections. The minimum size of maturity is less than 39 mm carapace length, but the minimum size capable of successful mating was estimated to be ca. 55 mm.