Effects of biochar addition on the anaerobic digestion of carbohydrate-rich,protein-rich,and lipid-rich substrates

ABSTRACT

Although biochar addition into the anaerobic digestion of food waste (FW) is an efficient means to enhance methane production, the effects of biochar on various FW components remain unclear. Laboratory batch experiments were conducted to investigate the impact of sewage sludge-derived biochar (SSB) supplementation on the anaerobic digestion (AD) of major FW components, including carbohydrate-rich, protein-rich, and lipid-rich substrates. The lag phase of AD with the carbohydrate-rich substrate was 48.6% shorter when SSB was added, and the cumulative methane yield was 4.74 times higher compared to AD without biochar. SSB supplementation also increased the rate of methane production from the lipid-rich substrate. However, the effect of SSB addition on AD of the protein-rich substrate was minor. Analysis of the microbial communities revealed that methanogen growth was enhanced during AD of the carbohydrate-rich and lipid-rich substrates, but not the protein-rich substrate, following SSB supplementation. Also, the most dominant methanogenic genus varied with the substrates. SSB addition promoted the growth of hydrolytic and fermentative bacteria, particularly phylum Bacteroidetes.

Implications: Biochar supplementation has been studied to overcome the shortcomings of anaerobic digestion (AD). However, the effects of biochar on different substrates remain unclear. This study compared carbohydrate-rich, protein-rich, and lipid-rich substrates in anaerobic digestion with sewage sludge-derived biochar (SSB). SSB supplementation improved methane generation from all but the protein-rich substrate. The study results imply that the effect of SSB addition on AD varied with the substrate due to the substrates underwent different degradation processes with different microbial communities.     

Comparisons of particulate-bound mercury (PBM) compositions in soil and vegetation at a traffic site

This investigation analyzes the particulate-bound mercury (PBM) compositions in soil and vegetation at a traffic sampling site in Taichung, Taiwan, during a sampling period from October to December, 2015. A direct mercury analyzer (DMA-80) was used to measure the particulate-bound mercury (PBM). A T-test was conducted to determine the mean differences between the PBM composition in soil and that in vegetation at the site. The results indicate that 1) the mean particulate-bound mercury compositions in soil and vegetation were the lowest in November, when the (mean OR average) wind speed was the highest (4.1 m/s); 2) Particulate-bound mercury compositions (PBM) in both soil and vegetation correlated weakly with temperature, humidity and wind speed; 3) T-test statistical results denoted that the PBM compositions did not significantly differ between soil and vegetation in the three-month sampling period.     

Annual ambient atmospheric mercury speciation measurement from Longjing,a rural site in Taiwan

The main purpose of this study was to monitor ambient air particulates and mercury species [RGM, Hg(p), GEM and total mercury] concentrations and dry depositions over rural area at Longjing in central Taiwan during October 2014 to September 2015. In addition, passive air sampler and knife-edge surrogate surface samplers were used to collect the ambient air mercury species concentrations and dry depositions, respectively, in this study. Moreover, direct mercury analyzer was directly used to detect the mercury Hg(p) and RGM concentrations. The result indicated that: (1) The average highest RGM, Hg(p), GEM and total mercury concentrations, and dry depositions were observed in January, prevailing dust storm occurred in winter season was the possible major reason responsible for the above findings. (2) The highest average RGM, Hg(p), GEM and total mercury concentrations, dry depositions and velocities were occurred in winter. This is because that China is the largest atmospheric mercury (Hg) emitter in the world. Its Hg emissions and environmental impacts need to be evaluated. (3) The results indicated that the total mercury ratios of Kaohsiung to that of this study were 5.61. This is because that Kaohsiung has the largest industry density (~60 %) in Taiwan. (4) the USA showed average lower mercury species concentrations when compared to those of the other world countries. The average ratios of China/USA values were 89, 76 and 160 for total mercury, RGM and Hg(p), respectively, during the years of 2000–2012.     

Microbial PCB dechlorination in dredged sediments and the effect of moisture

Evidence of reductive dechlorination of polychlorinated biphenyls (PCBs) in sediments was investigated in Hudson River sediments dredged and encapsulated in 1978 at Moreau, NY. The effect of different moisture contents in dredged sediments on dechlorination and dechlorinating microorganisms was also determined using PCB-spiked sediments in which the moisture level was adjusted by simulating a dewatering process. The congener pattern of PCBs indicated that the dechlorination in the dredged sediments was far less advanced than that in the river sediments collected from the general area of the dredged site (Ft. Edward site). Dechlorination in encapsulated sediments at the Moreau site appeared to have stopped soon after dredging. When microorganisms eluted from the encapsulated sediments were inoculated in clean sediments spiked with Aroclor 1242, an extensive dechlorination was observed, indicating that the encapsulated sediments still harbored dechlorinating microorganisms. However, the same inoculum failed to further dechlorinate residual congeners in the dredged sediments. On the other hand, an inoculum obtained in 1990 from the dredged site in the Hudson River dechlorinated the residual congeners further. In simulated dredged sediments, the maximum level of dechlorination was lower at reduced moisture contents. The population size of dechlorinating microorganisms, as determined by the most probable number (MPN) technique, was also smaller at the lower moisture levels. There was a significant correlation between the maximum extent of dechlorination and the specific death rate of dechlorinating populations. These results indicate that the underlying mechanism of the moisture-dependent maximum dechlorination is the moisture-dependence of the death rate of dechlorinating microorganisms.     

Removal of organic and nitrogen and molecular weight distribution of residual soluble organic from entrapped mixed microbial cells and activated sludge processes.

The simultaneous removal of organic and nitrogen and molecular weight distribution (MWD) of residual soluble chemical oxygen demand (RSCOD) in final effluent were investigated using entrapped mixed microbial cells (EMMC) and conventional activated sludge processes. Two different types of processes using EMMC carriers demonstrated better organic and nitrogen removal performance because of the high solids retention time (SRT) compared with the activated sludge process. Regarding the RSCOD, the longer SRT process (EMMC) was affected by reducing the hydraulic retention time, resulting in the increase of high-molecular-weight materials. On the other hand, reducing the aeration period had significantly affected the MWD in the shorter SRT process (activated sludge), resulting in an increase of low-molecular-weight materials.     

Comparison of seven indicator PCBs and three coplanar PCBs in beef, pork, and chicken fat

The risk assessment of polychlorinated biphenyls (PCBs) is difficult since complex congeners were used in many industrial applications for a long period of time and the residue monitoring in foods of animal origin and the environment were not established in comparable systems. The relationships of determined concentrations in indicator PCB congeners (mono- and di-ortho PCBs) and coplanar PCB congeners (non-ortho PCBs) in livestock products are presented in this study. The concentrations of seven indicator PCBs were compared with three coplanar PCBs in beef, pork, and chicken fat. Distributions of concentration for the indicator PCBs in three different animal species were similar except for that of PCB-118 (2,3',4,4',5-pentachlorobiphenyl) in pork fat. The congeners with the highest concentration were PCB-138 (2,2',3,4,4',5'-hexachlorobiphenyl) in beef and pork fat and PCB-28 (2,4,4'-trichlorobiphenyl) in chicken fat. The bioaccumulation and metabolism of PCBs in animal species represent different congener profiles in livestock products. The percentage of the total concentration of three coplanar PCBs was about 2% of the total concentration of the seven indicator PCBs. Relatively high concentration of mono-ortho and di-ortho PCBs in fat samples of livestock products may be calculated with the concentration of coplanar PCBs that can be usually determined on a sequential procedure with dioxin analysis. Therefore, the relationship of the amounts between seven indicator PCBs and three coplanar PCBs may be useful to derive the composition and level of contaminants in beef, pork, and chicken.     

Heavy contamination of a subsurface aquifer and a stream by livestock wastewater in a stock farming area, Wonju, Korea

A survey of groundwater and stream water quality was undertaken in a stock farming area where livestock wastewater infiltrates into sandy unsaturated zones and saturated bedrock aquifers containing fractures. To determine the degree of contamination and track the effect of livestock wastewater on groundwater and stream water quality, the population of indicator bacteria (total coliforms, fecal coliforms, fecal streptococci, Staphylococcus spp., and sulfite-reducing clostridia) together with relevant physicochemical parameters were monitored along the wastewater flow-pathways over a 19-month period. The stream water was severely contaminated with livestock wastewater. Nearly all physicochemical and bacteriological parameters in the stream water were much greater than those in the groundwater. Nitrate-N concentrations ranged from 10.0 to 20.0 mg l(-1) in boreholes located downstream (site C) from the livestock waste disposal site, while those in the background borehole (W2) were below 1.0 mg l(-1). Densities of indicator bacteria in boreholes at site C were two or three orders of magnitude higher than those in W2 borehole. In boreholes located downstream from the livestock waste disposal site, the concentration of ammonium-N, nitrate-N, and pollution indicator bacteria increased as groundwater level rose due to infiltration of rainwater. In W2 borehole, however, physicochemical parameters and the number of pollution indicator bacteria had no correlation with the groundwater level. Collectively, these results suggest that the deep aquifers were heavily contaminated with infiltrated livestock wastewater, which consequently must be adequately treated to minimize groundwater pollution.     

Soil Vapor Extraction and Chemical Oxidation to Remediate Chlorinated Solvents in Fractured Crystalline Bedrock: Pilot Study Results and Lessons Learned

A pilot study was completed at a fractured crystalline bedrock site using a combination of soil vapor extraction (SVE) and in‐situ chemical oxidation (ISCO) with Fenton's Reagent. This system was designed to destroy 1,1,1‐trichloroethane (TCA) and its daughter products, 1,1‐dichloroethene (DCE) and 1,1‐dichloroethane (DCA). Approximately 150 pounds of volatile organic compounds (VOCs) were oxidized in‐situ or removed from the aquifer as vapor during the pilot study. Largely as a result of chemical oxidation, TCA concentrations in groundwater located within a local groundwater mound decreased by 69 to 95 percent. No significant rebound in VOC concentration was observed in these wells. Wells located outside of the groundwater mound showed less dramatic decreases in VOC concentration, and the data show that vapor stripping and short‐term groundwater migration following the oxidant injection were the key processes at these wells. Although the porosity of the aquifer at the site is on the order of 2 percent or less, the pilot study showed that SVE could be an effective remedial process in fractured crystalline rock. © 2002 Wiley Periodicals, Inc.     

Mercury leaching characteristics of waste treatment residues generated from various sources in Korea

In this study, mercury (Hg) leaching characteristics of the waste treatment residues (fly ash, bottom ash, sludge, and phosphor powder) generated from various sources (municipal, industrial, medical waste incinerators, sewage sludge incinerator, oil refinery, coal-fired power plant, steel manufacturing plant, fluorescent lamp recycler, and cement kiln) in Korea were investigated. First, both Hg content analysis and toxicity characteristic leaching procedure (TCLP) testing was conducted for 31 collected residue samples. The Hg content analysis showed that fly ash from waste incinerators contained more Hg than the other residue samples. However, the TCLP values of fly ash samples with similar Hg content varied widely based on the residue type. Fly ash samples with low and high Hg leaching ratios (R_L) were further analyzed to identify the major factors that influence the Hg leaching potential. Buffering capacity of the low-R_L fly ash was higher than that of the high-R_L fly ash. The Hg speciation results suggest that the low-R_L fly ashes consisted primarily of low-solubility Hg compounds (Hg₂Cl₂, Hg⁰ or HgS), whereas the high-R_L fly ashes contain more than 20% high-solubility Hg compounds (HgCl₂ or HgSO₄).