The toxicity and physiological effect of goniothalamin, a styryl-pyrone, on the generalist herbivore, Spodoptera exigua Hübner

Efficacy of Goniothalamin a styryl-pyrone isolated from Goniothalamus wightii Hook.f. and Thoms, against beet armyworm, Spodoptera exigua (Hübner), populations was determined under laboratory condition. The experiments were carried out with concentrations of 5, 10, 15 and 30 ppm in an artificial diet and compared with control insects. Laboratory bioassay showed that the goniothalamin had a strong effect on food utilization, moulting and gut histology. The food consumption and conversion of ingested and digested food to body matter decreased with increasing pyrone concentration. The antifeedant activity was also observed in larvae of S. exigua. The treated third instar larvae exhibited mortality in a dose dependent manner. At 5, 10, 15 and 30 ppm/insect, the pyrone gave 23%, 45% 63% and 100% mortality respectively. The larvae of S. exigua gained significantly less weight until pupation in the 10 and 15 ppm pyrone concentrations. Duration of larval period was also affected after treatment with pyrone. The metamorphosis was delayed with additional moulting (7th instar) after treatment with 10 and 15 ppm of goniothalamin, the percentage of larvae successfully moulted into progressive instars was significantly decreased with an increase in pyrone concentrations. The effects of goniothalamin on midgut ultrastructure of third instar larvae of S. exigua were investigated by using light microscopy. Cross sections of the midgut showed that the epithelial cells were destroyed. Significant damage of the midgut epithelium was observed along with lysis.     

Effect of membrane type and material on performance of a submerged membrane bioreactor

This study evaluated the impact of membrane type and material on filtration performance in a submerged membrane bioreactor (MBR) for municipal wastewater treatment. Three types of microfiltration membranes with similar pore size of 0.1 microm but different materials and types, phase-inversed polytetrafluoroethylene (PTFE), track-etched polycarbonate (PCTE) and track-etched polyester (PETE), were used. Changes in permeability with time for the PCTE and PTFE membranes appeared similarly, whereas the PETE membrane exhibited the most rapid flux decline. Lower TOC in the permeate compared to the supernatant was probably due to a combination of biodegradation by the biofilm (cake layer) developed on the membrane surface and further filtration by cake layer and narrowed pores. The faster permeability decline and higher TOC removal rate of the PETE membrane were attributed to an initial permeate flux higher than an average design flux, which led to a faster rate of fouling and thicker cake layer. Therefore, an MBR should not be operated at a flux higher than the average design flux for a specific type of membrane. A gradual increment of biomass concentration did not significantly affect membrane permeability of each membrane investigated. Dissolved organic carbon fractionation results showed that the composition of each fraction between the supernatant and permeates did not change significantly with time, suggesting that membrane hydrophobicity was not a dominant factor affecting MBR fouling in this study. The organic foulants desorbed from the PCTE membrane contained approximately 60% of hydrophobic fraction, which was probably attributable to the extracellular polymeric substances proteins released from the biomass attached to the membrane. While the total filtration resistance of the PTFE membrane was influenced by a higher surface roughness, those of the PETE and PCTE membranes, which had a similar and lower roughness, were affected by the initial operating flux.     

Monitoring bacterial community structure and variability in time scale in full-scale anaerobic digesters

Using a high-throughput pyrosequencing technology, this study assessed bacterial community structure and time-scale variability in great detail in seven full-scale anaerobic digesters operated variously in terms of influent substrate, digestion temperature, and reactor configuration. Pyrosequencing generated a total of 83,774 sequence reads from 40 digester sludge samples collected monthly for six months. The highest number of sequence reads were detected within Proteobacteria (20.5%), followed by those within Bacteroidetes (19.7%), Firmicutes (17.8%), and Chloroflexi (4.8%). The relative composition of bacterial populations was varied within the digesters as well as between the digesters, and the bacterial community structures were mainly influenced by digestion temperature. Detailed bacterial community structures were assessed by analyzing the operational taxonomic units (OTUs) based on 97% sequence similarity, which resulted in a total of 9051 OTUs. Among these, a total of 31 core OTUs were analyzed and inferred phylogenetically, which enabled us to classify the sequences within an unclassified phylum. Unclassified sequences were mostly affiliated with the sequences within Spirochaetes and Firmicutes. Interestingly, numerically dominant novel phylotypes (18% of the total sequence reads) presumably involved in anaerobic digestion within Spirochaetes were identified. Temporal variability was further explored using a non-metric multidimensional scaling ordination which demonstrated that the variability of the bacterial community within the digesters was smaller than between digesters. Correlation analysis demonstrated that digester performance and operational conditions affected the pattern of bacterial community in the ordination. Additionally, a multi-response permutation procedure revealed that the bacterial communities within the digesters were more similar than those belonging to other digesters statistically, demonstrating a patchiness of the digesters in the distribution of bacterial populations. Overall, this study revealed the correlation of bacterial community structure and time-scale variability with digester performance and operating conditions.     

Reach and messages of the world's largest ivory burn

Recent increases in ivory poaching have depressed African elephant populations. Successful enforcement has led to ivory stockpiling. Stockpile destruction is becoming increasingly popular, and most destruction has occurred in the last 5 years. Ivory destruction is intended to send a strong message against ivory consumption, both in promoting a taboo on ivory use and catalyzing policy change. However, there has been no effort to establish the distribution and extent of media reporting on ivory destruction events globally. We analyzed media coverage of the largest ivory destruction event in history (Kenya, 30 April 2016) across 11 nation states connected to ivory trade. We used an online‐media crawling tool to search online media outlets and subjected 5 of the largest print newspapers (by circulation) in 5 nations of interest to content analysis. Most online news on the ivory burn came from the United States (81% of 1944 articles), whereas most of the print news articles came from Kenya (61% of 157 articles). Eighty‐six to 97% of all online articles reported the burn as a positive conservation action, whereas 4–50% discussed ivory burning as having a negative impact on elephant conservation. Most articles discussed law enforcement and trade bans as effective for elephant conservation. There was more relative search interest globally in the 2016 Kenyan ivory burn than any other burn in 5 years. Ours is the first attempt to track the reach of media coverage relative to an ivory burn and provides a case study in tracking the effects of a conservation‐marketing event.     

Removal of As(V) and Sb(V) in aqueous solution by Mg/Al-layered double hydroxide-incorporated polyethersulfone polymer beads (PES-LDH)

To develop a novel granular adsorbent to remove arsenic and antimony from water, calcined Mg/Al-layered double-hydroxide (CLDH)-incorporated polyethersulfone (PES) granular adsorbents (PES-LDH) were prepared using a core-shell method having 25% PES in an N,N-dimethylformamide solution. The PES-LDH displayed a spherical hollow shape having a rough surface and the average particle size of 1–2 mm. On the PES-LDH surface, nanosized CLDH (100–150 nm) was successfully immobilized by consolidation between PES and CLDH. The adsorption of Sb(V) by PES-LDH was found to be more favorable than for As(V), with the maximum adsorption capacity of As(V) and Sb(V) being 7.44 and 22.8 mg/g, respectively. The regeneration results indicated that a 0.5 M NaOH and 5 M NaCl mixed solution achieved an 80% regeneration efficiency in As(V) adsorption and desorption. However, the regeneration efficiency of Sb(V) gradually decreased due to its strong binding affinity, even though the PES-LDH showed much higher Sb(V) adsorption efficiency than As(V). This study suggested that PES-LDH could be a promising granular adsorbent for the remediation of As(V) and Sb(V) contained in wastewater.

     

Interferometric Microwave Radiometers for High-Resolution Imaging of the Atmosphere Brightness Temperature Based on the Adaptive Capon Signal Processing Algorithm

Passive microwave remote sensing from satellites and ground stations has contributed uniquely, and substantially, to the study of atmospheric chemistry, meteorology, and environmental monitoring. As user requirements are raised, in terms of the accuracy and the spatial resolution, a mechanically scanning radiometer, with a real aperture, becomes impractical due to the requirement for a very large antenna size. However, an aperture synthesis interferometric radiometer presents a valuable alternative. The work presented in this paper was devoted to high spatial resolution imaging, using the 37 GHz band interferometric radiometer, developed by ourselves. The spatially adaptive Capon beamforming method was exploited for the imaging, which outperformed the conventional Fourier Transform method. We concluded that the high spatial resolution imaging of the brightness temperature of the atmosphere could be accomplished with an interferometric radiometer equipped with the developed Capon beamforming imaging algorithm.     

Design of a water quality monitoring network in a large river system using the genetic algorithm

Despite several decades of operations and the increasing importance of water quality monitoring networks, the authorities still rely on experiential insights and subjective judgments in siting water quality monitoring stations. This study proposes an integrated technique which uses a genetic algorithm (GA) and a geographic information system (GIS) for the design of an effective water quality monitoring network in a large river system. In order to develop a design scheme, planning objectives were identified for water quality monitoring networks and corresponding fitness functions were defined using linear combinations of five selection criteria that are critical for developing a monitoring system. The criteria include the representativeness of a river system, compliance with water quality standards, supervision of water use, surveillance of pollution sources and examination of water quality changes. The fitness levels were obtained through a series of calculations of the fitness functions using GIS data. A sensitivity analysis was performed for major parameters such as the numbers of generations, population sizes and probability of crossover and mutation, in order to determine a good fitness level and convergence for optimum solutions. The proposed methodology was applied to the design of water quality monitoring networks in the Nakdong River system, in Korea. The results showed that only 35 out of 110 stations currently in operation coincide with those in the new network design, therefore indicating that the effectiveness of the current monitoring network should be carefully re-examined. From this study, it was concluded that the proposed methodology could be a useful decision support tool for the optimized design of water quality monitoring networks.     

Effect of Solids Concentration on Bacterial Leaching of Heavy Metals from Sewage Sludge

Abstract

Microbial metal leaching from sewage sludge (2-9% w/v) was carried out with the iron-oxidizing bacterium Thiobacillus ferrooxidans. Measurements of pH, oxidation-reduction potential, and concentration of Fe²⁺ indicated that T. ferrooxidans was effective in removing metals from an incubation bath containing less than 5% sludge solids concentration. Specifically, Cu leaching was completely suppressed at a high solids concentration of 9% (w/v). Results indicated that the deactivation of T. ferrooxidans at a high sludge content was mainly due to the presence of inhibiting materials such as organic matter. A mixed culture of sulfur-oxidizing bacteria was obtained by enrichment from anaerobically digested sewage sludge to enhance the efficiency of the microbial leaching process. These bacteria were much more effective in metal leaching than was iron-oxidizing T. ferrooxidans. At 9% (w/v) solids concentration, the leaching efficiencies of Zn and Cu were 78% (2.66 g/kg dry sludge) and 59% (1.36 g/kg dry sludge), respectively. Therefore, when removing heavy metals from the anaerobically digested sewage sludge, the indigenous sulfur-oxidizing bacteria isolated in the current study were more efficient than T. ferrooxidans, especially at high sludge solids concentrations.     

Optimal operating parameters in the composting of swine manure with wastepaper

Abstract

A series of experiments were conducted to determine the optimal conditions for composting of swine manure and wastepaper. The aeration rate and mixing ratio were the variables investigated. In the first study (Study‐1), four experiments each with the same mixing ratio but a different aeration rate were carried out. In the second study (Study‐2), different mixing ratios were investigated, each however with the same aeration rate which was found to be optimal from Study‐1. Composting efficiencies were evaluated on the temperature profile and the reduction of C/N ratio. From the aeration rates of 200, 500, 1000, and 1500 mL/min.kg_vs that were evaluated, the aeration rate of 500 mL/min.kg_vs and higher showed good results. In Study‐2, where the initial C/N ratios were 20, 25, 30, and 35 respectively, the C/N ratio of 30 was found to be optimal. In conclusion, the composting of swine manure with the amendment of wastepaper was best carried out at the aeration of >500 mL/min.kg_vs and C/N ratio of 30.