Optimal operating parameters in the composting of swine manure with wastepaper

Abstract

A series of experiments were conducted to determine the optimal conditions for composting of swine manure and wastepaper. The aeration rate and mixing ratio were the variables investigated. In the first study (Study‐1), four experiments each with the same mixing ratio but a different aeration rate were carried out. In the second study (Study‐2), different mixing ratios were investigated, each however with the same aeration rate which was found to be optimal from Study‐1. Composting efficiencies were evaluated on the temperature profile and the reduction of C/N ratio. From the aeration rates of 200, 500, 1000, and 1500 mL/min.kg_vs that were evaluated, the aeration rate of 500 mL/min.kg_vs and higher showed good results. In Study‐2, where the initial C/N ratios were 20, 25, 30, and 35 respectively, the C/N ratio of 30 was found to be optimal. In conclusion, the composting of swine manure with the amendment of wastepaper was best carried out at the aeration of >500 mL/min.kg_vs and C/N ratio of 30.     

Effect of Solids Concentration on Bacterial Leaching of Heavy Metals from Sewage Sludge

Abstract

Microbial metal leaching from sewage sludge (2-9% w/v) was carried out with the iron-oxidizing bacterium Thiobacillus ferrooxidans. Measurements of pH, oxidation-reduction potential, and concentration of Fe²⁺ indicated that T. ferrooxidans was effective in removing metals from an incubation bath containing less than 5% sludge solids concentration. Specifically, Cu leaching was completely suppressed at a high solids concentration of 9% (w/v). Results indicated that the deactivation of T. ferrooxidans at a high sludge content was mainly due to the presence of inhibiting materials such as organic matter. A mixed culture of sulfur-oxidizing bacteria was obtained by enrichment from anaerobically digested sewage sludge to enhance the efficiency of the microbial leaching process. These bacteria were much more effective in metal leaching than was iron-oxidizing T. ferrooxidans. At 9% (w/v) solids concentration, the leaching efficiencies of Zn and Cu were 78% (2.66 g/kg dry sludge) and 59% (1.36 g/kg dry sludge), respectively. Therefore, when removing heavy metals from the anaerobically digested sewage sludge, the indigenous sulfur-oxidizing bacteria isolated in the current study were more efficient than T. ferrooxidans, especially at high sludge solids concentrations.     

Investigation of hit-and-run crash occurrence and severity using real-time loop detector data and hierarchical Bayesian binary logit model with random effects

Objective: Most of the extensive research dedicated to identifying the influential factors of hit-and-run (HR) crashes has utilized typical maximum likelihood estimation binary logit models, and none have employed real-time traffic data. To fill this gap, this study focused on investigating factors contributing to HR crashes, as well as the severity levels of HR.

Methods: This study analyzed 4-year crash and real-time loop detector data by employing hierarchical Bayesian models with random effects within a sequential logit structure. In addition to evaluation of the impact of random effects on model fitness and complexity, the prediction capability of the models was examined. Stepwise incremental sensitivity and specificity were calculated and receiver operating characteristic (ROC) curves were utilized to graphically illustrate the predictive performance of the model.

Results: Among the real-time flow variables, the average occupancy and speed from the upstream detector were observed to be positively correlated with HR crash possibility. The average upstream speed and speed difference between upstream and downstream speeds were correlated with the occurrence of severe HR crashes. In addition to real-time factors, other variables found influential for HR and severe HR crashes were length of segment, adverse weather conditions, dark lighting conditions with malfunctioning street lights, driving under the influence of alcohol, width of inner shoulder, and nighttime.

Conclusions: This study suggests the potential traffic conditions of HR and severe HR occurrence, which refer to relatively congested upstream traffic conditions with high upstream speed and significant speed deviations on long segments. The above findings suggest that traffic enforcement should be directed toward mitigating risky driving under the aforementioned traffic conditions. Moreover, enforcement agencies may employ alcohol checkpoints to counter driving under the influence (DUI) at night. With regard to engineering improvements, wider inner shoulders may be constructed to potentially reduce HR cases and street lights should be installed and maintained in working condition to make roads less prone to such crashes.     

The application and development of country-specific parameters for accurate estimations of methane emissions from solid-waste disposal sites

To identify the application and development of country-specific parameters for methane emission estimations from solid-waste disposal sites, National Inventory Reports of 41 Annex I countries and National Communications of ten non-Annex I countries of the United Nations Framework Convention on Climate Change were analyzed. A first-order decay method was applied to 38 out of 41 Annex I countries and to five out of ten non-Annex I countries in national GHG inventory submissions up to 2012. Country-specific parameters were approximately 26 % of the total number of parameters used in the 38 Annex I countries and were mostly developed for degradable organic carbon and reaction constants that cover certain waste compositions. The UNFCCC encourages countries to develop more country-specific parameters reflecting the distinct characteristics of each country in which solid-waste disposal site is a key source. Depending on a country’s condition, a stepwise approach regarding the development of country-specific parameters needs to be done so as to improve the accuracy of methane emission estimates in the solid-waste disposal site category.     

Polychlorinated biphenyls (PCB) and dichlorodiphenyltrichloroethane (DDE) air concentrations in the Lake Ontario region: Trends and potential sources

Airborne particle and gas samples were collected approx every 12 days from April 2002 to June 2006 at the Sterling Nature Center located near the southeast corner of Lake Ontario. These samples were analyzed for polychlorinated biphenyls (PCBs) and dichlorodiphenyltrichloroethane (DDE). Clausius-Clapeyron (C–C) regression analyses of PCBs and DDE yielded moderate correlations (r² = 0.54, p < 0.001; r² = 0.74, p < 0.001, respectively) indicating that much of the variations in concentrations can be explained by temperature. Back trajectory analysis indicated that the most important factors driving unusually high PCB partial pressures relative to those predicted by the C–C regression were slow wind speeds and winds generally from the southwest. This combination, which occurred frequently in 2004, increased contact of the air with contaminated upwind surfaces with minimum dilution. Hybrid receptor modeling (Potential Source Contribution Function (PSCF)) results for the total PCBs identified the midwestern US region that contains the urban areas of southern Indiana (IN), southwestern Ohio (OH), and northern Kentucky (KY) having the highest PSCF values. In general urban areas like Chicago (IL), Detroit (MI), Cleveland (OH), St. Louis (MO), and Nashville (TN) also had significant possibilities. In contrast, the PSCF modeling for DDE identified northern Alabama as the area with the highest probability where DDT was applied to cotton fields.     

Alpha radiation exposure decreases apoptotic cells in zebrafish embryos subsequently exposed to the chemical stressor, Cd

The aim of this study was to demonstrate that zebrafish embryos subjected to a priming exposure provided by one environmental stressor (low-dose alpha particles) can induce an adaptive response against a subsequent challenging exposure provided by another environmental stressor (heavy metal Cd). The effect thus identified would be an antagonistic multiple stressor effect. The effects of alpha particle radiation and/or Cd on whole embryos were studied through quantification of apoptotic signals at 24?h post-fertilization (hpf). Embryos were stained with the vital dye acridine orange, followed by counting the stained cells. For each set of experiments, 30 dechorionated embryos were divided into three groups, each having ten embryos. The three groups of embryos were referred to as (A) the control group, which received no more further treatments after dechorionation, (B) Cd-treated group, which did not receive any priming exposure and would receive a challenging exposure at 10 hpf and (C) (alpha + Cd)-treated group, which would receive both priming and challenging exposures. We defined the normalized net number of apoptotic signals in the (alpha + Cd)-treated group as N _C * = [(apoptotic signals for (alpha + Cd)-treated group ? average apoptotic signals for the corresponding control group)/average apoptotic signals for the corresponding control group] and that in the Cd-treated group as N _B* = [(apoptotic signals for Cd-treated group ? average apoptotic signals for the corresponding control group)/ average apoptotic signals for the corresponding control group]. By using the non-parametric Mann?CWhitney U statistic, we were able to show that N _C * was significantly smaller than N _B *(p?=?0.006). These demonstrated an antagonistic multiple stressor effect between ionizing radiation and Cd through the induction of an adaptive response by the ionizing radiation against subsequent exposures to Cd.     

Evaluation of the antifungal effects of bio-oil prepared with lignocellulosic biomass using fast pyrolysis technology

This study was performed to investigate the utility of bio-oil, produced via a fast pyrolysis process, as an antifungal agent against wood-rot fungi. Bio-oil solutions (25-100 wt.%) were prepared by diluting the bio-oil with EtOH. Wood block samples (yellow poplar and pitch pine) were treated with diluted bio-oil solutions and then subjected to a leaching process under hot water (70 °C) for 72 h. After the wood block samples were thoroughly dried, they were subjected to a soil block test using Tyromyces palustris and Trametes versicolor. The antifungal effect of the 75% and 100% bio-oil solutions was the highest for both wood blocks. Scanning electron microscopy analysis indicated that some chemical components in the bio-oil solution could agglomerate together to form clusters in the inner part of the wood during the drying process, which could act as a wood preservative against fungal growth. According to GC/MS analysis, the components of the agglomerate were mainly phenolic compounds derived from lignin polymers.     

Reducing ammonia emissions and volatile fatty acids in poultry litter with liquid aluminum chloride

This study was a pen trial in which the effects of adding different rates of liquid aluminum chloride (AlCl(3)) on litter pH, total volatile fatty acids (VFAs), and ammonia (NH(3)) fluxes was evaluated. Liquid AlCl(3) treatments used in this study were sprayed on the rice hull surface at rates of 100 g, 200 g, and 300 g liquid AlCl(3)/kg rice hulls; untreated rice hulls served as controls. Litter pH, total VFAs, and NH(3) fluxes were all lowered (P< 0.05) by all of the liquid AlCl(3) treatments compared with controls during certain times of the 5 week study. However, there were no significant differences among treatments on litter pH at the end of the study (from 3 to 5 weeks) or NH(3) fluxes at beginning of the study (0 to 3 weeks). Total VFAs were reduced 16 %, 29 %, and 53 % by 100 g liquid AlCl(3)/kg rice hulls, 200 g liquid AlCl(3)/kg rice hulls, and 300 g liquid AlCl(3)/kg rice hulls, respectively. Liquid AlCl(3)additions reduced NH(3) fluxes by 35 %, 57 % and 67 %, respectively, at the low, medium and high rates. In summary, these results indicate that adding liquid aluminum chloride to rice hulls would be a useful tool in reducing the negative environmental impact of poultry litter. It should be noted that the decreased VFA production and NH(3) volatilization was chiefly associated with reduction in litter pH.     

Mercury (Hg) emissions from domestic biomass combustion for space heating

Three mercury (Hg) species (gaseous elemental mercury (GEM), gaseous oxidized mercury (GOM), and fine particulate-bound mercury (PBM_2.5)) were measured in the stack of a small scale wood combustion chamber at 400 °C, in the stack of an advanced wood boiler, and in two areas influenced by wood combustion. The low temperature process (lab-scale) emitted mostly GEM (∼99% when burning wood pellets and ∼95% when burning unprocessed wood). The high temperature wood boiler emitted a greater proportion of oxidized Hg (approximately 65%) than the low temperature system. In field measurements, mean PBM_2.5 concentrations at the rural and urban sites in winter were statistically significantly higher than in warmer seasons and were well correlated with Delta-C concentrations, a wood combustion indictor measured by an aethalometer (UV-absorbable carbon minus black carbon). Overall the results suggest that wood combustion may be an important source of oxidized mercury (mostly in the particulate phase) in northern climates in winter.