Effect of activated sludge properties and membrane operation conditions on fouling characteristics in membrane bioreactors

Biofouling control is considered to be a major challenge in operating membrane bioreactors (MBRs) for the treatment of wastewater. This study examined the impact of biological, chemical, and physical properties of activated sludge on membrane filtration performance in laboratory-scale MBRs. Sludges with different microbial communities were produced using pseudo-continuous stirred-tank reactors and pseudo-plug flow reactors treating a synthetic paper mill wastewater. Various filtration resistances were used to investigate membrane fouling characteristics, and molecular biology tools targeting 16S ribosomal DNA gene sequences were used to identify predominant bacterial populations in the sludges or attached to the fouled membranes. Filtration experiments using axenic cultures of Escherichia coli, Acinetobacter calcoaceticus, and Gordonia amarae were also performed to better understand the initiation and development of biofouling. The results showed that the tendency of membranes to biofoul depended upon membrane operating conditions as well as the properties of the activated sludge in the MBR systems. Specific bacterial populations, which were not dominant in the activated sludges, were selectively accumulated on the membrane surface leading to the development of irreversible biofouling.     

A combined approach for the evaluation of a volatile organic compound emissions inventory

Emissions inventories significantly affect photochemical air quality model performance and the development of effective control strategies. However, there have been very few studies to evaluate their accuracy. Here, to evaluate a volatile organic compound (VOC) emissions inventory, we implemented a combined approach: comparing the ratios of carbon bond (CB)-IV VOC groups to nitrogen oxides (NOx) or carbon monoxide (CO) using an emission preprocessing model, comparing the ratios of VOC source contributions from a source apportionment technique to NOx or CO, and comparing ratios of CB-IV VOC groups to NOx or CO and the absolute concentrations of CB-IV VOC groups using an air quality model, with the corresponding ratios and concentrations observed at three sites (Maryland, Washington, DC, and New Jersey). The comparisons of the ethene/NOx ratio, the xylene group (XYL)/NOx ratio, and ethene and XYL concentrations between estimates and measurements showed some differences, depending on the comparison approach, at the Maryland and Washington, DC sites. On the other hand, consistent results at the New Jersey site were observed, implying a possible overestimation of vehicle exhaust. However, in the case of the toluene group (TOL), which is emitted mainly from surface coating and printing sources in the solvent utilization category, the ratios of TOL/ NOx or CO, as well as the absolute concentrations revealed an overestimate of these solvent sources by a factor of 1.5 to 3 at all three sites. In addition, the overestimate of these solvent sources agreed with the comparisons of surface coating and printing source contributions relative to NOx from a source apportionment technique to the corresponding value of estimates at the Maryland site. Other studies have also suggested an overestimate of solvent sources, implying a possibility of inaccurate emission factors in estimating VOC emissions from surface coating and printing sources. We tested the impact of these overestimates with a chemical transport model and found little change in ozone but substantial changes in calculated secondary organic aerosol concentrations.     

Distributions of heavy metals in the sediments of South Korean harbors

Bottom sediments of harbors in the South Korea have been long suspected for metal contamination due to ship-based and urban-based activities for the past several decades. A number of areas have been suspected to impair ecosystem services to the local residents and drawn complaints from main stakeholders. Twelve contamination suspected harbors were subject to evaluate the level of contamination of Cr, Ni, Cu, Zn, As, Cd, Pb and Hg. The level of sediment contamination for each metal was evaluated comparing the relative enrichment of a given metal to pollution-insensitive aluminum. Regional background concentration of a given metal was also determined based on its down core measurement and sediment texture. Ecological risk posed by the presence of heavy metals was evaluated using the sediment quality guidelines (SQGs) developed by United States National Ocean and Atmosphere Administration (US NOAA) as benchmarks for evaluating sediment chemistry to aquatic organisms. Cu, Zn, Cd, Pb and Hg in the surface sediment were found to be higher than a factor of 1.5 than background sediments, and the overall metal contaminations of surface sediment can be regarded as medium-high- to high-priority sites in the sense of SQGs.     

Bioremediation of diesel-contaminated soil with composting

The major objective of this research was to find the appropriate mix ratio of organic amendments for enhancing diesel oil degradation during contaminated soil composting. Sewage sludge or compost was added as an amendment for supplementing organic matter for composting of contaminated soil. The ratios of contaminated soil to organic amendments were 1:0.1, 1:0.3, 1:0.5, and 1:1 as wet weight basis. Target contaminant of this research was diesel oil, which was spiked at 10,000 mg/kg sample on a dry weight basis. The degradation of diesel oil was significantly enhanced by the addition of these organic amendments relative to straight soil. Degradation rates of total petroleum hydrocarbons (TPH) and n-alkanes were the greatest at the ratio of 1:0.5 of contaminated soil to organic amendments on wet weight basis. Preferential degradation of n-alkanes over TPH was observed regardless of the kind and the amount of organic amendments. The first order degradation constant of n-alkanes was about twice TPH degradation constant. Normal alkanes could be divided in two groups (C10-C15 versus C16-C20) based on the first order kinetic constant. Volatilization loss of TPH was only about 2% of initial TPH. Normal alkanes lost by volatilization were mainly by the compounds of C10 to C16. High correlations (r=0.80-0.86) were found among TPH degradation rate, amount of CO2 evolved, and dehydrogenase activity.     

Sequential soil washing techniques using hydrochloric acid and sodium hydroxide for remediating arsenic-contaminated soils in abandoned iron-ore mines

Sequential washing techniques using single or dual agents [sodium hydroxide (NaOH) and hydrochloric acid (HCl) solutions] were applied to arsenic-contaminated soils in an abandoned iron-ore mine area. We investigated the best remediation strategies to maximize arsenic removal efficiency for both soils and arsenic-containing washing solution through conducting a series of batch experiments. Based on the results of a sequential extraction procedure, most arsenic prevails in Fe-As precipitates or coprecipitates, and iron exists mostly in the crystalline forms of iron oxide. Soil washing by use of a single agent was not effective in remediating arsenic-contaminated soils because arsenic extractions determined by the Korean standard test (KST) methods for washed soils were not lower than 6mg kg(-1) in all experimental conditions. The results of X-ray diffraction (XRD) indicated that iron-ore fines produced mobile colloids through coagulation and flocculation in water contacting the soils, containing dissolved arsenic and fine particles of ferric arsenate-coprecipitated silicate. The first washing step using 0.2M HCl was mostly effective in increasing the cationic hydrolysis of amorphous ferrihydrite, inducing high removal of arsenic. Thus, the removal step of arsenic-containing flocs can lower arsenic extractions (KST methods) of washed soils. Among several washing trials, alternative sequential washing using 0.2M HCl followed by 1M HCl (second step) and 1M NaOH solution (third step) showed reliable and lower values of arsenic extractions (KST methods) of washed soils. This washing method can satisfy the arsenic regulation of washed soil for reuse or safe disposal application. The kinetic data of washing tests revealed that dissolved arsenic was easily readsorbed into remaining soils at a low pH. This result might have occurred due to dominant species of positively charged crystalline iron oxides characterized through the sequential extraction procedure. However, alkaline extraction using NaOH was effective in removing arsenic readsorbed onto the surface of crystalline minerals. This is because of the ligand displacement reaction of hydroxyl ions with arsenic species and high pH conditions that can prevent readsorption of arsenic.     

Gaseous mercury fluxes from the forest floor of the Adirondacks

The flux of gaseous elemental mercury (Hg⁰) from the forest floor of the Adirondack Mountains in New York (USA) was measured numerous times throughout 2005 and 2006 using a polycarbonate dynamic flux chamber (DFC). The Hg flux ranged between −2.5 and 27.2 ng m⁻² h⁻¹ and was positively correlated with temperature and solar radiation. The measured Hg emission flux was highest in spring, and summer, and lowest in winter. During leaf-off periods, the Hg emission flux was highly dependent on solar radiation and less dependent on temperature. During leaf-on periods, the Hg emission flux was fairly constant because the forest canopy was shading the forest floor. Two empirical models were developed to estimate yearly Hg⁰ emissions, one for the leaf-off period and one for the leaf-on period. Using the U.S. EPA's CASTNET meteorological data, the cumulative estimated emission flux was approx. 7.0 μg Hg⁰ m⁻² year⁻¹.     

Health risk assessment and source apportionment of PM2.5-bound toxic elements in the industrial city of Siheung,Korea

Environmental Science and Pollution Research - The emission sources and their health risks of fine particulate matter (PM2.5) in Siheung, Republic of Korea, were investigated as a middle-sized...     

Electrocatalytic conversion of nitrate waste into ammonia: a review

Environmental Chemistry Letters - The electrocatalytic reduction of nitrate waste into ammonia allows both the removal of nitrate contaminants and an alternative production of ammonia compared to...