Recycling of tailings from Korea Molybdenum Corporation as admixture for high-fluidity concrete

The main objective of this study is to develop an eco-friendly and a large recycling technique of flotation Tailings from korea (TK) from metal mines as construction materials such as admixtures for high-fluidity concrete (HFC). TK used in this study was obtained from the Korea Molybdenum Corporation in operation. TK was used as the alternative material to adjust flowability and viscosity of HFC in the form of powder agent which enables adjustment of concrete compressive strength. In this study, we have performed concrete rheological tests and concrete flowability tests to obtain the quality characteristics of TK for using as the admixture in producing HFC. The results indicated that the adequate mix ratio of cement to TK should be 8:2 (vol%). It is more effective to use the TK as admixture to control flowability, viscosity and strength of HFC than the normal concrete. It was found that TK could be recycled construction materials in bulk such as admixture for HFC, in terms of the economic and eco-friendly aspects.     

The estimation of N2O emissions from municipal solid waste incineration facilities: The Korea case

The greenhouse gases (GHGs) generated in municipal solid waste (MSW) incineration are carbon dioxide (CO₂), methane (CH₄), and nitrous oxide (N₂O). In South Korea case, the total of GHGs from the waste incineration facilities has been increasing at an annual rate 10%. In these view, waste incineration facilities should consider to reduce GHG emissions.This study is designed to estimate the N₂O emission factors from MSW incineration plants, and calculate the N₂O emissions based on these factors. The three MSW incinerators examined in this study were either stoker or both stoker and rotary kiln facilities. The N₂O concentrations from the MSW incinerators were measured using gas chromatography-electron capture detection (GC-ECD) equipment.The average of the N₂O emission factors for the M01 plant, M02 plant, and M03 plant are 71, 75, and 153 g-N₂O/ton-waste, respectively. These results showed a significant difference from the default values of the intergovernmental panel on climate change (IPCC), while approaching those values derived in Japan and Germany. Furthermore, comparing the results of this study to the Korea Energy Economics Institute (KEEI) (2007) data on waste incineration, N₂O emissions from MSW incineration comprised 19% of the total N₂O emissions.     

Comprehensive analysis on mercury stream of cold cathode fluorescent lamps (CCFLs) in Korea (Republic of)

Journal of Material Cycles and Waste Management - Due to the activation of the Minamata Convention, policies and treatment facilities for the safe management of mercury and mercury compounds have...     

Comparative Analysis of Viral Concentration Methods for Detecting the HAV Genome Using Real-Time RT-PCR Amplification

Hepatitis A is a major infectious disease epidemiologically associated with foodborne and waterborne outbreaks. Molecular detection using real-time RT-PCR to detect the hepatitis A virus (HAV) in contaminated vegetables can be hindered by low-virus recoveries during the concentration process and by natural PCR inhibitors in vegetables. This study evaluated three virus concentration methods from vegetables: polyethylene glycol (PEG) precipitation, ultrafiltration (UF), and immunomagnetic separation (IMS). UF was the most efficient concentration method, while PEG and IMS were very low for the recovery rate of HAV. These results demonstrate that UF is the most appropriate method for recovering HAV from contaminated vegetables and that this method combined with the real-time RT-PCR assay may be suitable for routine laboratory use.     

Distinct effects of intrinsic motivation and extrinsic rewards on radical and incremental creativity: The moderating role of goal orientations

Previous studies have investigated the role of intrinsic motivation and extrinsic rewards in enhancing employee creativity. However, the possibility that these motivational factors affect the creativity of different types remains largely unexplored, particularly in the organizational settings. Moreover, the potential that personality traits may moderate the function of these motivational factors toward creativity is another underresearched area. By drawing on the person–situation interaction perspective, we propose that both intrinsic motivation and extrinsic rewards predict creativity but of different types. Thus, we diverge from the view that creativity is a uniform criterion domain by adopting the distinction between radical and incremental creativity. Our empirical analysis of 220 independent employee–supervisor dyads confirmed that intrinsic motivation and extrinsic rewards predict radical and incremental creativity, respectively. Moreover, the effects of intrinsic motivation on radical and incremental creativity are more positive for employees with higher learning goal orientation. By contrast, the effect of extrinsic rewards on incremental creativity is more positive for employees with higher performance goal orientation. This study offers elaborate and nuanced perspectives and insights into the role of different motivational processes in the development of different types of creativity.     

Variability of nitrous oxide and carbon dioxide emissions continuously measured in solid waste incinerators

Nitrous oxide and carbon dioxide were continuously measured and variability of emission factors (EFs) was evaluated in five municipal waste incinerators (MWIs) and four industrial waste incinerators (IWIs) from 24 to 86 days between 2008 and 2011. N₂O EFs were calculated by Monte Carlo simulation and mean N₂O EFs were 7.1, 107, 127, 219 g N₂O/ton waste combusted in MWIs with selective catalytic reduction (SCR) for NOx control, MWIs with selective non-catalytic reduction (SNCR), IWIs with SNCR, and a MWI using fluidized bed with SNCR, respectively. Climate-relevant CO₂ EFs ranged from 0.45 to 0.72 ton CO₂/ton waste combusted in MWIs. Maximum values of upper limit for 95% confidence intervals (CIs) of N₂O EFs estimated in each MWIs with SCR, MWIs with SNCR, IWIs with SNCR were 185, 94, 101% of mean N₂O EFs, respectively. Meanwhile, maximum values of upper limit for 95% CIs of CO₂ EFs were much lower as between 18 and 36% in those facilities. 84% CIs of mean N₂O EFs in MWIs with SNCR and IWIs with SNCR were overlapped indicating those values are not significantly different.     

Distributions of heavy metals in the sediments of South Korean harbors

Bottom sediments of harbors in the South Korea have been long suspected for metal contamination due to ship-based and urban-based activities for the past several decades. A number of areas have been suspected to impair ecosystem services to the local residents and drawn complaints from main stakeholders. Twelve contamination suspected harbors were subject to evaluate the level of contamination of Cr, Ni, Cu, Zn, As, Cd, Pb and Hg. The level of sediment contamination for each metal was evaluated comparing the relative enrichment of a given metal to pollution-insensitive aluminum. Regional background concentration of a given metal was also determined based on its down core measurement and sediment texture. Ecological risk posed by the presence of heavy metals was evaluated using the sediment quality guidelines (SQGs) developed by United States National Ocean and Atmosphere Administration (US NOAA) as benchmarks for evaluating sediment chemistry to aquatic organisms. Cu, Zn, Cd, Pb and Hg in the surface sediment were found to be higher than a factor of 1.5 than background sediments, and the overall metal contaminations of surface sediment can be regarded as medium-high- to high-priority sites in the sense of SQGs.     

Bioremediation of diesel-contaminated soil with composting

The major objective of this research was to find the appropriate mix ratio of organic amendments for enhancing diesel oil degradation during contaminated soil composting. Sewage sludge or compost was added as an amendment for supplementing organic matter for composting of contaminated soil. The ratios of contaminated soil to organic amendments were 1:0.1, 1:0.3, 1:0.5, and 1:1 as wet weight basis. Target contaminant of this research was diesel oil, which was spiked at 10,000 mg/kg sample on a dry weight basis. The degradation of diesel oil was significantly enhanced by the addition of these organic amendments relative to straight soil. Degradation rates of total petroleum hydrocarbons (TPH) and n-alkanes were the greatest at the ratio of 1:0.5 of contaminated soil to organic amendments on wet weight basis. Preferential degradation of n-alkanes over TPH was observed regardless of the kind and the amount of organic amendments. The first order degradation constant of n-alkanes was about twice TPH degradation constant. Normal alkanes could be divided in two groups (C10-C15 versus C16-C20) based on the first order kinetic constant. Volatilization loss of TPH was only about 2% of initial TPH. Normal alkanes lost by volatilization were mainly by the compounds of C10 to C16. High correlations (r=0.80-0.86) were found among TPH degradation rate, amount of CO2 evolved, and dehydrogenase activity.     

Catalytic liquid-phase oxidation of acetaldehyde to acetic acid over a Pt/CeO2–ZrO2–SnO2/γ-alumina catalyst

Pt/CeO₂–ZrO₂–SnO₂/γ-Al₂O₃ catalysts were prepared by co-precipitation and wet impregnation methods for catalytic oxidation of acetaldehyde to acetic acid in water. In the present catalysts, Pt and CeO₂–ZrO₂–SnO₂ were successfully dispersed on the γ-Al₂O₃ support. Dependences of platinum content and reaction time on the selective oxidation of acetaldehyde to acetic acid were investigated to optimize the reaction conditions for obtaining both high acetaldehyde conversion and highest selectivity to acetic acid. Among the catalysts, a Pt(6.4 wt.%)/Ce_0.68Zr_0.17Sn_0.15O_2.0(16 wt.%)/γ-Al₂O₃ catalyst showed the highest acetaldehyde oxidation activity. On this catalyst, acetaldehyde was completely oxidized after the reaction at 0°C for 8 hr, and the selectivity to acetic acid reached to 95% and higher after the reaction for 4 hr and longer.