Effects of activated carbon types and service life on removal of endocrine disrupting chemicals: amitrol, nonylphenol, and bisphenol-A

Removal performances of endocrine disrupting chemicals (EDC) such as amitrol, nonylphenol, and bisphenol-A were evaluated in this study using granular activated carbon (GAC) adsorption. This study found that GAC adsorption was effective in removal of EDCs with high K_ow value. Nonylphenol and bisphenol-A were effectively adsorbed onto all carbons (including the used carbons) tested in this study. As indicated by K_ow value, nonylphenol was more effectively adsorbed than bisphenol-A. The coal-based carbon was found more effective than other carbons in the adsorption of nonylphenol and bisphenol-A due to its larger pore volume. The adsorption capacity reduced with the operation year, and the extent of the reduction was different depending upon the carbon type and the operation year. Amitrol was effectively removed by biological degradation, but was poorly adsorbed. Since the microbes residing at the used carbons already accustomed to amitrol, the used carbons removed amitrol better than the virgin carbons. Although the coal-based carbon showed the best removal performance of amitrol, GAC adsorption could not be recommended for amitrol removal because considerable portion of incoming amitrol (9–87%) passed through GAC adsorption column. According to this study, pore volume mainly influenced the adsorption capacity, but the surface charge was also important due to electrical interaction. The adsorption parameters for nonylphenol and bisphenol-A provided by this study could be valuable when GAC adsorption was considered to handle an accidental spill of nonylphenol and bisphenol-A.     

A study on hexachromic ion selective electrode based on supported liquid membranes

An ion selective electrode (ISE) for determining Cr(VI) using supported liquid membranes (SLMs) containing trioctylphosphine oxide (TOPO) was investigated in this study. TOPO, as a carrier, had a high selectivity for Cr(VI) against interfering ions such as sulfate, nitrate, nitrite, and chloride. The composition of the SLM was optimized as 0.193 g TOPO/1 mL NPOE (o-nitrophenyl octyl ether)/0.5 g poly (vinyl chloride) for detection of Cr(VI). The Cr(VI) concentration was measured in the range of1 × 10^-3 to 1 × 10^-6 M with the SLM prepared in the study. It seemed that Cr(VI) was transported in the SLM as a triply charged ion indicated by the slope of the emf response. Selectivity coefficients and detection limits of Cr(VI) in the presence of interfering ions were determined experimentally using the fixed interference method.     

Sediment characteristics,phosphorus types and phosphorus release rates between river and lake sediments

The Han river is 469.7 km long with 26219-km2 area watershed, and is the primary drinking water source for the 20 million people that live in Seoul, Kangwon-Do and Kyunggi-Do, Korea. Phosphorus release from sediments impacts water quality, and is endangering the beneficial use of the river. This research measures phosphorus release and predicts future releases from bottom sediments of two tributary areas (Chungpyung Lake (CPL) and Jamsil submerged dam (JSD) area in the Han river). Sediment samples were taken over a 4-year period from four points in the Jamsil dam area and from 92 points in CPL. The sediments were analyzed for total phosphorus, the form of the phosphorus and release rates under different conditions to the water column. Sediment phosphorus distribution from CPL was 3-5% adsorbed-P (Ads-P), 15-20% non-apatite-P (NAI-P), 25-30% apatite-P (A-P) and 45-57% residual-P (R-P). In the JSD area, the phosphorus distribution ranges were 1-3% Ads-P, 22-39% NAI-P, 26-40% A-P and 30-39% R-P. Laboratory experiments showed that phosphorus release rates from 60 to 80 mg/m2 week in JSD area and ranged from 25 to 40 mg/m2 week in CPL sediments.     

Fundamental characteristics of input waste of small MSW incinerators in Korea

Waste incineration in a small incinerator is a simple and convenient way of treating waste discharged from small areas or from large facilities and buildings such as business centers, marketplaces, factories, and military units. Despite their ostensible advantages, however, many small incinerators frequently suffer from serious problems, e.g., unsystematic waste feeding, unstable combustion, deficient air pollution control devices, and consequently, environmental pollution. To obtain a better understanding of the characterization of wastes in small incinerators, we investigated a series of fundamental characteristics, i.e., physical composition, bulk density, proximate and ultimate analysis, potential energy content, and so on. The main waste components in small incinerators were identified as paper and plastic; the proportion of food waste was less than that in large incinerators. Especially, a low ratio of food waste had a strong influence on other waste characteristics, e.g., lower moisture content and bulk density, and higher potential energy. On the other hand, in contrast with that of HCl, there was no distinguishable linear relationship between Cl content in waste and PCDD/DF concentration in combustion gas.     

Chlorinated persistent organic pollutants in black-tailed gulls (Larus crassirostris) from Hokkaido, Japan

Concentrations and patterns of several chlorinated persistent organic pollutants (POPs) including polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and biphenyls (PCBs) and DDTs, HCHs, CHLs and HCB were determined in black-tailed gulls (Larus crassirostris) from breeding grounds in Hokkaido, Japan. Subcutaneous fat of five adult gulls was analyzed, which had different concentrations of target compounds, whereas gull eggs contained similar concentrations of target compounds. Similar congener profiles were found between adult gulls and eggs. The concentrations of non-ortho PCBs varied from 3.4 to 13.5 ng/g lipid weight (lw) in the fat of black-tailed gulls and from 2.4 to 7.4 ng/g lw in their eggs. 2,3,7,8-PCDD/Fs occurred at relatively lower concentrations than non-ortho PCB congeners in both adult gulls and eggs. The total TEQs (toxic equivalents, PCDD/Fs+ non-ortho PCB) ranged from 0.26 to 1.0 ng/g lw in adult gulls and ranged from 0.19 to 0.58 ng/g lw in eggs.     

Biodegradation of methoxychlor and its metabolites by the white rot fungus Stereum hirsutum related to the inactivation of estrogenic activity

The white rot fungus Stereum hirsutum was used to degrade methoxychlor [2,2,2-trichloro-1,1-bis(4-methoxyphenyl)ethane] in culture and the degraded products were extensively determined. The estrogenic activity of the degraded products of methoxychlor was examined using cell proliferation and pS2 gene expression assays in MCF-7 cells. S. hirsutum showed high resistance to methoxychlor 100 ppm, and the mycelial growth was fully completed within 8 days of incubation at 30 degrees C. Methoxychlor in liquid culture medium was gradually converted into 2,2-dichloro-1,1-bis(4-methoxyphenyl)ethane, 2,2-dichloro-1,1-bis(4-methoxyphenyl)ethylene, 2-chloro-1,1-bis(4-methoxyphenyl) ethane, 2-chloro-1,1-bis(4-methoxyphenyl) ethylene, and 1,1-bis(4-methoxyphenyl)ethylene, indicating that methoxychlor is dominantly degraded by dechlorination and dehydrogenation. MCF-7 cells were demonstrated to proliferate actively at the 10-5 M concentration of methoxychlor. However, cell proliferation was significantly inhibited by the incubation with methoxychlor culture media containing S. hirsutum. In addition, the expression level of pS2 mRNA was increased at the concentration (10-5 M) of methoxychlor. The reductive effect of S. hirsutum for methoxychlor was clear but not significant as in the proliferation assay.     

Optimal operating parameters in the composting of swine manure with wastepaper

A series of experiments were conducted to determine the optimal conditions for composting of swine manure and wastepaper. The aeration rate and mixing ratio were the variables investigated. In the first study (Study-1), four experiments each with the same mixing ratio but a different aeration rate were carried out. In the second study (Study-2), different mixing ratios were investigated, each however with the same aeration rate which was found to be optimal from Study-1. Composting efficiencies were evaluated on the temperature profile and the reduction of C/N ratio. From the aeration rates of 200, 500, 1000, and 1500 mL/min.kg_vs that were evaluated, the aeration rate of 500 mL/min.kg_vs and higher showed good results. In Study-2, where the initial C/N ratios were 20, 25, 30, and 35 respectively, the C/N ratio of 30 was found to be optimal. In conclusion, the composting of swine manure with the amendment of wastepaper was best carried out at the aeration of > 500 mL/min.kg_vs and C/N ratio of 30.     

The use of food waste-based diets and Napier grass to culture grass carp: growth performance and contaminants contained in cultured fish

The present study used commercial feeds, food waste feeds, Napier grass, and mixed feeds (food waste feed to Napier grass ratio, 1:10) to feed grass carp (Ctenopharyngodon idellus). The results indicated that grass carp fed with food waste feeds and mix feeds achieved growth performance (based on specific growth rate and feed conversion ratio) that was similar to commercial feeds (p?>?0.05). Concentrations of metalloid/metals in food waste feeds and polycyclic aromatic hydrocarbons (PAHs) in Napier grass were relatively higher than other types of fish feeds (p?<?0.05). However, most of the metalloid/metals and PAH levels in fish fed with four types of fish feeds were not significantly different (p?>?0.05). These findings show that food waste feeds are suitable for using in the production of fish feed and Napier grass can be served as supplemental feeds for grass carp, and hence reducing the production cost.