Comparisons of polybrominated diphenyl ethers levels in paired South Korean cord blood, maternal blood, and breast milk samples

Polybrominated diphenyl ethers (PBDEs), commonly used flame retardants, have been reported as potential endocrine disruptor and neurodevelopmental toxicants, thus giving rise to the public health concern. The goal of this study was to investigate the relationship between umbilical cord blood, maternal blood, and breast milk concentrations of PBDEs in South Korean. We assessed PBDE levels in paired samples of umbilical cord blood, maternal blood, and breast milk. The levels of seven PBDE congeners were measured in 21 paired samples collected from the Cheil Woman’s Hospital (Seoul, Korea) in 2008. We also measured thyroid hormones levels in maternal and cord blood to assess the association between PBDEs exposure and thyroid hormone levels. However, there was no correlation between serum thyroxin (T4) and total PBDEs concentrations. The total PBDEs concentrations in the umbilical cord blood, maternal blood, and breast milk were 10.7 ± 5.1 ng g⁻¹ lipid, 7.7 ± 4.2 ng g⁻¹ lipid, and 3.0 ± 1.8 ng g⁻¹ lipid, respectively. The ranges of total PBDE concentrations observed were 2.28-30.94 ng g⁻¹ lipid in umbilical cord blood, 1.8-17.66 ng g⁻¹ lipid in maternal blood, and 1.08-8.66 ng g⁻¹ lipid in breast milk. BDE-47 (45-73% of total PBDEs) was observed to be present dominantly in all samples, followed by BDE-153. A strong correlation was found for major BDE-congeners between breast milk and cord blood or maternal blood and cord blood samples. The measurement of PBDEs concentrations in maternal blood or breast milk may help to determine the concentration of PBDEs in infant.     

Fungal biodegradation of CCA-treated wood and removal of its metal components

In the present study, 5 isolates of brown-rot fungi were used for fungal bioprocessing (FB) of chromated copper arsenate (CCA)-treated wood wastes: Antrodia vaillantii SEL8501, Fomitopsis palustris TYP0507 and TYP6137, and Crustoderma sp. KUC8065 and KUC8611. The isolates showed notable capacity for the degradation of treated wood and removal of CCA components via the American Wood Protection Association soil block test. Among them, Crustoderma sp. KUC8611 effectively decayed the treated wood, causing a mass loss of up to 60%. F. palustris caused extensive leaching of CrO₃ of up to 79% and As₂O₅ of up to 87%, but only moderate leaching of CuO of up to 50%. This high capacity for removal of CrO₃ and As₂O₅ showed a strong logarithmic relationship with the amount of oxalic acid produced in the decayed wood. The majority of metals removed from treated wood during the decay process were deposited in the soil and feeder strip. Further investigation will be required to establish the capability of selected fungi for FB of full-sized lumber treated with CCA.     

In vivo assessment of plant extracts for control of plant diseases: A sesquiterpene ketolactone isolated from Curcuma zedoaria suppresses wheat leaf rust

As an alternative to synthetic pesticides, natural materials such as plant extracts and microbes have been considered to control plant diseases. In this study, methanol extracts of 120 plants were explored for in vivo antifungal activity against Rhizoctonia solani, Botrytis cinerea, Phytophthora infestans, Puccinia triticina, and Blumeria graminis f. sp. hordei. Of the 120 plant extracts, eight plant extracts exhibited a disease control efficacy of more than 90% against at least one of five plant diseases. In particular, a methanol extract of Curcuma zedoaria rhizomes exhibited strong activity against wheat leaf rust caused by P. triticina. When the C. zedoaria methanol extracts were partitioned with various solvents, the layers of n-hexane, methylene chloride, and ethyl acetate showed disease control values of 100, 80, and 43%, respectively, against wheat leaf rust. From the C. zedoaria rhizome extracts, an antifungal substance was isolated and identified as a sesquiterpene ketolactone based on the mass and nuclear magnetic resonance spectral data. The active compound controlled the development of rice sheath blight, wheat leaf rust, and tomato late blight. Considering the in vivo antifungal activities of the sesquiterpene ketolactone and the C. zedoaria extracts, these results suggest that C. zedoaria can be used as a potent fungicide in organic agriculture.     

Assessing hydrological impact of potential land use change through hydrological and land use change modeling for the Kishwaukee River basin (USA)

We connected a cellular, dynamic, spatial urban growth model and a semi-distributed continuous hydrology model to quantitatively predict streamflow in response to possible future urban growth at a basin scale. The main goal was to demonstrate the utility of the approach for informing public planning policy and investment choices. The Hydrological Simulation Program-Fortran (HSPF) was set up and calibrated for the Kishwaukee River basin in the Midwestern USA and was repeatedly run with various land use scenarios generated either by the urban growth model (LEAMluc) or hypothetically. The results indicate that (1) the land use scenarios generated by LEAMluc result in little changes in total runoff but some noticeable changes in surface flow; (2) the argument that low flows tend to decrease with more urbanized areas in a basin was confirmed in this study but the selection of indicators for low flows can result in misleading conclusions; (3) dynamic simulation modeling by connecting a distributed land use change model and a semi-distributed hydrological model can be a good decision support tool demanding reasonable amount of efforts and capable of long-term scenario-based assessments.     

Tracing lead pollution sources in abandoned mine areas using stable Pb isotope ratios

This study focused on Pb isotope ratios of sediments in areas around an abandoned mine to determine if the ratios can be used as a source tracer. For pretreatment, sediment samples were dissolved with mixed acids, and a multi-collector inductively coupled plasma mass spectrometer (MC-ICP-MS, Nu plasma II) was used to investigate the Pb isotopic composition of the samples. The measured isotope ratios were then corrected for instrumental mass fractionation by measuring the ²⁰³Tl/²⁰⁵Tl ratio. Repeated measurements with the NIST SRM 981 reference material showed that the precision of all ratios was below 104 ppm (±2σ) for 50 ng/g. The isotope ratios (²⁰⁷Pb/²⁰⁶Pb) found were 0.85073?±?0.0004~0.85373?±?0.0003 for the main stream, while they were 0.83736?±?0.0010 for the tributary and 0.84393?±?0.0002 for the confluence. A binary mixing equation for isotope ratios showed that the contributions of mine lead to neighboring areas were up to 60 %. Therefore, Pb isotope ratios can be a good source tracer for areas around abandoned mines.     

The estimation of N2O emissions from municipal solid waste incineration facilities: The Korea case

The greenhouse gases (GHGs) generated in municipal solid waste (MSW) incineration are carbon dioxide (CO₂), methane (CH₄), and nitrous oxide (N₂O). In South Korea case, the total of GHGs from the waste incineration facilities has been increasing at an annual rate 10%. In these view, waste incineration facilities should consider to reduce GHG emissions.This study is designed to estimate the N₂O emission factors from MSW incineration plants, and calculate the N₂O emissions based on these factors. The three MSW incinerators examined in this study were either stoker or both stoker and rotary kiln facilities. The N₂O concentrations from the MSW incinerators were measured using gas chromatography-electron capture detection (GC-ECD) equipment.The average of the N₂O emission factors for the M01 plant, M02 plant, and M03 plant are 71, 75, and 153 g-N₂O/ton-waste, respectively. These results showed a significant difference from the default values of the intergovernmental panel on climate change (IPCC), while approaching those values derived in Japan and Germany. Furthermore, comparing the results of this study to the Korea Energy Economics Institute (KEEI) (2007) data on waste incineration, N₂O emissions from MSW incineration comprised 19% of the total N₂O emissions.     

Case study in Korea of manufacturing SRF for polyurethanes recycling in e-wastes

Statistics showed that approximately 1,195,000 refrigerator units (116,094 metric tons) were recycled annually in Korea’s formal sector. Although the recycling level for these was satisfactory, collecting and processing polyurethane at recycling centers (RCs) posed several problems, including the risk of fire from the incinerator, the generation of fugitive dust, and the high cost of disposal. The objective of our study is to provide an overview of refrigerator recycling and to introduce polyurethane solid refuse fuel (SRF) manufacturing facilities. These facilities, installed at four regional RCs in Korea, have a capacity of 800 kg/h, a motor of 476 kWh, and cost $664,300 (USD) to construct (criteria two facilities). According to our examination of the physico-chemical properties of SRF product, all results in categories have been satisfied with the quality standards. In terms of finances, RCs can reduce the total disposal cost from $160–175 to $60 by installing facilities, which results in savings of (on average) $180,546 annually. The Metropolitan Electronics Recycling Center, for example, has reduced its costs by $180,880 each year. Their return on investment was calculated to be about 3 years and 8 months (assuming no operating expenses) or 7 years and 4 months (including operating expenses).     

Variability of nitrous oxide and carbon dioxide emissions continuously measured in solid waste incinerators

Nitrous oxide and carbon dioxide were continuously measured and variability of emission factors (EFs) was evaluated in five municipal waste incinerators (MWIs) and four industrial waste incinerators (IWIs) from 24 to 86 days between 2008 and 2011. N₂O EFs were calculated by Monte Carlo simulation and mean N₂O EFs were 7.1, 107, 127, 219 g N₂O/ton waste combusted in MWIs with selective catalytic reduction (SCR) for NOx control, MWIs with selective non-catalytic reduction (SNCR), IWIs with SNCR, and a MWI using fluidized bed with SNCR, respectively. Climate-relevant CO₂ EFs ranged from 0.45 to 0.72 ton CO₂/ton waste combusted in MWIs. Maximum values of upper limit for 95% confidence intervals (CIs) of N₂O EFs estimated in each MWIs with SCR, MWIs with SNCR, IWIs with SNCR were 185, 94, 101% of mean N₂O EFs, respectively. Meanwhile, maximum values of upper limit for 95% CIs of CO₂ EFs were much lower as between 18 and 36% in those facilities. 84% CIs of mean N₂O EFs in MWIs with SNCR and IWIs with SNCR were overlapped indicating those values are not significantly different.     

Establishing methodology for evaluating refrigerant recovery and recycling equipment: institutional responses to climate change in South Korea

Journal of Material Cycles and Waste Management - This paper aims to propose testing methods and standards for evaluating refrigerant recovery and recycling equipment so that the methodology can be...