Urban tracer dispersion experiments during the second DAPPLE field campaign in London 2004

As part of the DAPPLE programme two large scale urban tracer experiments using multiple simultaneous releases of cyclic perfluoroalkanes from fixed location point sources was performed. The receptor concentrations along with relevant meteorological parameters measured are compared with a three screening dispersion models in order to best predict the decay of pollution sources with respect to distance. It is shown here that the simple dispersion models tested here can provide a reasonable upper bound estimate of the maximum concentrations measured with an empirical model derived from field observations and wind tunnel studies providing the best estimate. An indoor receptor was also used to assess indoor concentrations and their pertinence to commonly used evacuation procedures.     

Comprehensive analysis of the carbon impacts of vehicle intelligent speed control

In recent years sophisticated technologies have been developed to control vehicle speed based on the type of road the vehicle is driven on using Global Positioning Systems and in-car technology that can alter the speed of the vehicle. While reducing the speed of road vehicles is primarily of interest from a safety perspective, vehicle speed is also an important determinant of vehicle emissions and thus these technologies can be expected to have impacts on a range of exhaust emissions. This work analyses the results from a very large, comprehensive field trial that used 20 instrumented vehicles with and without speed control driven almost 500,000 km measuring vehicle speed at 10 Hz. We develop individual vehicle modal emissions models for CO₂ for 30 Euro III and Euro IV cars at a 1-Hz time resolution. Generalized Additive Models were used to describe how emissions from individual vehicles vary depending on their driving conditions, taking account of variable interactions and time-lag effects. We quantify the impact that vehicle speed control has on-vehicle emissions of CO₂ by road type, fuel type and driver behaviour. Savings in CO₂ of ≈6% were found on average for motorway-type roads when mandatory speed control was used compared with base case conditions. For most other types of road, speed control has very little effect on emissions of CO₂ and in some cases can result in increased emissions for low-speed limit urban roads. We also find that there is on average a 20% difference in CO₂ emission between the lowest and highest emitting driver, which highlights the importance of driver behaviour in general as a means of reducing emissions of CO₂.     

Assimilation of conventional and satellite wind observations in a mesoscale atmospheric model for studying atmospheric dispersion

A mesoscale atmospheric model PSU/NCAR MM5 is used to provide operational weather forecasts for a nuclear emergency response decision support system on the southeast coast of India. In this study the performance of the MM5 model with assimilation of conventional surface and upper-air observations along with satellite derived 2-d surface wind data from QuickSCAT sources is examined. Two numerical experiments with MM5 are conducted: one with static initialization using NCEP FNL data and second with dynamic initialization by assimilation of observations using four dimensional data assimilation (FDDA) analysis nudging for a pre-forecast period of 12 h. Dispersion simulations are conducted for a hypothetical source at Kalpakkam location with the HYSPLIT Lagrangian particle model using simulated wind field from the above experiments. The present paper brings out the differences in the atmospheric model predictions and the differences in dispersion model results from control and assimilation runs. An improvement is noted in the atmospheric fields from the assimilation experiment which has led to significant alteration in the trajectory positions, plume orientation and its distribution pattern. Sensitivity tests using different PBL and surface parameterizations indicated the simple first order closure schemes (Blackadar, MRF) coupled with the simple soil model have given better results for various atmospheric fields. The study illustrates the impact of the assimilation of the scatterometer wind and automated weather stations (AWS) observations on the meteorological model predictions and the dispersion results.     

Evaluation of a detailed model of secondary organic aerosol formation from α-pinene against dark ozonolysis experiments

BOREAM, a detailed model for the gas-phase oxidation of α-pinene and its subsequent formation of Secondary Organic Aerosol (SOA), is tested against a large set of SOA yield measurements obtained in dark ozonolysis experiments. For the majority of experiments, modelled SOA yields are found to agree with measured yields to within a factor 2. However, the comparisons point to a general underestimation of modelled SOA yields at high temperatures (above 30 °C), reaching an order of magnitude or more in the worst cases, whereas modelled SOA yields are often overestimated at lower temperature (by a factor of about 2). Comparisons of results obtained using four different vapour pressure prediction methods indicate a strong sensitivity to the choice of the method, although the overestimated temperature dependence of the yields is found in all cases. Accounting for non-ideality of the aerosol mixture (based on an adapted UNIFAC method) has significant effects, especially at low yields. Our simulations show that the formation of oligomers through the gas-phase reactions of Stabilised Criegee Intermediates (SCI) with other molecular organic products could increase the SOA yield significantly only at very low relative humidity (below 1%). Further tests show that the agreement between model and measurements is improved when the ozonolysis mechanism includes additional production of non-volatile compounds.     

Contribution of transition metals in the reactive oxygen species activity of PM emissions from retrofitted heavy-duty vehicles

We assessed the contribution of water-soluble transition metals to the reactive oxygen species (ROS) activity of diesel exhaust particles (DEPs) from four heavy-duty vehicles in five retrofitted configurations (V-SCRT, Z-SCRT, DPX, hybrid, and school bus). A heavy-duty truck without any control device served as the baseline vehicle. Particles were collected from all vehicle-configurations on a chassis dynamometer under three driving conditions: cruise (80 km h^?1), transient UDDS, and idle. A sensitive macrophage-based in vitro assay was used to determine the ROS activity of collected particles. The contribution of water-soluble transition metals in the measured activity was quantified by their removal using a Chelex^® complexation method. The study demonstrates that despite an increase in the intrinsic ROS activity (per mass basis) of exhaust PM with use of most control technologies, the overall ROS activity (expressed per km or per h) was substantially reduced for retrofitted configurations compared to the baseline vehicle. Chelex treatment of DEPs water extracts removed a substantial (≥70%) and fairly consistent fraction of the ROS activity, which ascertains the dominant role of water-soluble metals in PM-induced cellular oxidative stress. However, relatively lower removal of the activity in few vehicle-configurations (V-SCRT, DPX and school bus idle), despite a large aggregate metals removal, indicated that not all species were associated with the measured activity. A univariate regression analysis identified several transition metals (Fe, Cr, Co and Mn) as significantly correlated (R > 0.60; p < 0.05) with the ROS activity. Multivariate linear regression model incorporating Fe, Cr and Co explained 90% of variability in ROS levels, with Fe accounting for the highest (84%) fraction of the variance.     

Study on ambient concentrations of PM10, PM10–2.5, PM2.5 and gaseous pollutants. Trace elements and chemical speciation of atmospheric particulates

This study provides the first comprehensive report on mass concentrations of particulate matter of various sizes, inorganic and organic gas concentrations monitored at three sampling sites in the city of Palermo (Sicily, Italy). It also provides information on the water-soluble species and trace elements. A total of 2054 PM₁₀ (1333) and PM_2.5 (721) daily measurements were collected from November 2006 to February 2008. The highest mass concentrations were observed at the urban stations, average values being about two times higher than those at the suburban (control) site. Time variations in PM₁₀ and also PM_10–2.5 were observed at the urban stations, the highest concentrations being measured in autumn and winter. CO, NOx, NO₂, benzene, toluene and o-xylene concentrations peaked in autumn and winter, a pattern similar to those recorded for PM₁₀ and PM_10–2.5 mass levels, indicating the importance of traffic emissions in urban air pollution. 91% and 51% of the benzene measurements exceeded the limit of 5 μg m^?3 at the two urban monitoring sites. Trace elements (As, Ba, Cr, Cu, Mo, Pb, Sb) suspected of being introduced into the atmosphere mainly by anthropogenic activities, were highly enriched with respect to local soil. Results indicate that a large fraction of PM₁₀ (31–47% in weight) and PM_2.5 (29% in weight) is made up of water-soluble ions. Ammonium sulphate and nitrate particles accounted for 14–29 wt% of particulate matter mass concentrations. Crustal and marine components, combined, account for 41% and 49% in PM_2.5 and PM₁₀, respectively. The calculated deficits in Cl^- and NH₄⁺ ions suggest that a proportion of these ions are lost, via the formation of gaseous NH₄Cl or HCl and NH₃.     

Biomarkers of pesticide exposure and diabetes in the 1999–2004 National Health and Nutrition Examination Survey

The associations of 8 pesticides and pesticide metabolites with total diabetes (diagnosed and undiagnosed) and pre-diabetes (glycohemoglobin 5.7–6.4%) were evaluated using the National Health and Nutrition Examination Survey (NHANES), 1999–2004. Six of the pesticides were found to be associated with total diabetes in separate adjusted logistic regressions. These pesticides and pesticide metabolites were beta-hexachlorocyclohexane, p,p′-DDE, p,p′-DDT, oxychlordane, trans-nonachlor, and heptachlor epoxide. When the number of compounds elevated was tested, 4 or more, of the 6, elevated had an odds ratio of 4.99 (95% CI 1.97–12.61) compared to none elevated. When the 6 compounds were tested together in a single combined adjusted logistic regression only oxychlordane, a metabolite of chlordane, and heptachlor epoxide, a metabolite of heptachlor, were significantly associated with total diabetes. In the combined adjusted logistic regression, oxychlordane ≥ 14.5 ng/g lipid adjusted had an odds ratios of 1.90 (95% CI 1.09–3.32) compared to oxychlordane < 14.5 ng/g lipid adjusted, and heptachlor epoxide ≥ 14.6 ng/g lipid adjusted had an odds ratio of 1.70 (95% CI 1.16–2.49) compared to heptachlor epoxide < 14.6 ng/g lipid adjusted. Heptachlor epoxide and p,p′-DDT were significantly associated with pre-diabetes in separate adjusted logistic regressions. When these 2 compounds were tested together only heptachlor epoxide remained significantly associated with pre-diabetes. The evidence supporting the relationship between pesticides and pesticide metabolites, with diabetes, was strongest for heptachlor epoxide and oxychlordane, intermediate for p,p′-DDT, and least for beta-hexachlorocyclohexane, p,p′-DDE, and trans-nonachlor. Mirex and dieldrin were not associated with total diabetes or pre-diabetes.     

Assessment of dietary exposure to PCDD/F and dioxin-like PCB in infant formulae available on the EU market

In infant period, human milk and infant formulae are the major sources of exposure to dioxins (polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (PCB). Since in many parts of Europe the mothers are increasingly reluctant to breastfeed their babies, the main objective of the present study is to assess the level of exposure of non-breast-fed infants during their early development. Consequently, the concentration levels of PCDD/F and dioxin-like PCB were determined in industrial infant formulae including "starting" (aged 0-4months) and "follow-on" (after 4months) products of milk formula, soy formula and hypoallergenic infant formula, available on the EU market. Furthermore, dietary exposure to dioxin of exclusively formula-fed infants was assessed at each month from 0 to 9months. The results suggest that dietary exposure to dioxins via formulae is higher when consuming "starting" than "follow-on" infant formulae on a body-weight basis. Estimated dietary exposure after 4months of age was always below the lowest range of the Tolerable Daily Intake (TDI) of 1pg WHO-TEQkg(-1)bwd(-1) and Provisional Tolerable Monthly Intake (PTMI) of 70pg WHO-TEQkg(-1)bwmonth(-1). The highest estimated cumulative dietary exposure to PCDD/F and dioxin-like PCB was obtained considering infants of 0-1months fed with the "starting" hypoallergenic infant formula (2.8pg WHO-TEQkg(-1)bwd(-1) and 84pg WHO-TQkg(-1)bwmonth(-1)). However, these elevated levels are much lower than those observed in some studies in breast-fed infants. The study can be used for further risk assessments in regard to infant exposure.     

Metabolic diversity of the heterotrophic microorganisms and potential link to pollution of the Rouge River

The heterotrophic microbial communities of the Rouge River were tracked using Biolog Ecoplates to understand the metabolic diversity at different temporal and spatial scales, and potential link to river pollution. Site less impacted by anthrophogenic sources (site 1), showed markedly lower metabolic diversity. The only substrates that were utilized in the water samples were carbohydrates. Sites more impacted by anthrophogenic sources (sites 8 and 9) showed higher metabolic diversity. Higher functional diversity was linked to the physico-chemical and biological properties of the water samples (i.e. higher concentrations of DO, DOC, chlorophyll, and bacterial density). Biolog analysis was found to be useful in differentiating metabolic diversity between microbial communities; in determining factors that most influence the separation of communities; and in identifying which substrates were most utilized by the communities. It can also be used as an effective ecological indicator of changes in river function attributable to urbanization and pollution.     

Accumulation and biological cycling of heavy metal in four salt marsh species, from Tagus estuary (Portugal)

Pools of Zn, Cu, Cd and Co in leaf, stem and root tissues of Sarcocornia fruticosa, Sarcocornia perennis, Halimione portulacoides and Spartina maritima were analyzed on a bimonthly basis, in a Tagus estuary salt marsh. All the major concentrations were found in the root tissues, being the concentrations in the aboveground organs neglectable for sediment budget proposes, as seen by the low root-aboveground translocation. Metal annual accumulation, root turnovers and cycling coefficients were also assessed. S. maritima showed the higher root turnovers and cycling coefficients for most of the analyzed metals, making this a phytostabilizer specie. By contrast the low root turnover, cycling coefficient and low root necromass generation makes S. perennis the most suitable specie for phytoremediation processes. Although the high amounts of metal return to the sediments, due to root senescence, salt marshes can still be considered sinks of heavy metals, cycling heavy metals mostly between sediment and root.