Role of competition in phytoplankton population for the occurrence and control of plankton bloom in the presence of environmental fluctuations

Termination of harmful algal blooms (HABs) and coexistence of phytoplankton–zooplankton populations are of great importance to human health, ecosystem, environment, tourism and fisheries. In this paper, we propose a three component model consisting of non-toxic phytoplankton (NTP), toxin producing phytoplankton (TPP) and zooplankton (Z). The growth of zooplankton species is assume to reduce due to toxic chemicals released by TPP population. We have extended the model proposed by Chattopadhyay et al. [Chattopadhyay, J., Sarkar, R.R., Pal, S., 2004. Mathematical modelling of harmful algal blooms supported by experimental findings. Ecol. Comp. 1, 225–235] by including competition terms between TPP and NTP. We observe the effect of competition factors both in the presence and absence of the environmental fluctuation. From our field as well as model analysis we observe that competition helps in the coexistence of the species, but if the effect of competition is very high on the TPP population, it results in planktonic bloom. It is shown that the coexistence equilibrium loses its stability when the competition coefficient crosses a critical value and resulting Hopf-bifurcation around the positive equilibrium depicting oscillations phenomena of the populations.     

Characterizing ammonia emissions from swine farms in eastern North Carolina: part 1--conventional lagoon and spray technology for waste treatment

Ammonia (NH3) fluxes from waste treatment lagoons and barns at two conventional swine farms in eastern North Carolina were measured. The waste treatment lagoon data were analyzed to elucidate the temporal (seasonal and diurnal) variability and to derive regression relationships between NH3 flux and lagoon temperature, pH and ammonium content of the lagoon, and the most relevant meteorological parameters. NH3 fluxes were measured at various sampling locations on the lagoons by a flowthrough dynamic chamber system interfaced to an environmentally controlled mobile laboratory. Two sets of open-path Fourier transform infrared (FTIR) spectrometers were also used to measure NH3 concentrations for estimating NH3 emissions from the animal housing units (barns) at the lagoon and spray technology (LST) sites. Two different types of ventilation systems were used at the two farms. Moore farm used fan ventilation, and Stokes farm used natural ventilation. The early fall and winter season intensive measurement campaigns were conducted during September 9 to October 11, 2002 (lagoon temperature ranged from 21.2 to 33.6 degrees C) and January 6 to February 2, 2003 (lagoon temperature ranged from 1.7 to 12 degrees C), respectively. Significant differences in seasonal NH3 fluxes from the waste treatment lagoons were found at both farms. Typical diurnal variation of NH3 flux with its maximum value in the afternoon was observed during both experimental periods. Exponentially increasing flux with increasing surface lagoon temperature was observed, and a linear regression relationship between logarithm of NH3 flux and lagoon surface temperature (T1) was obtained. Correlations between lagoon NH3 flux and chemical parameters, such as pH, total Kjeldahl nitrogen (TKN), and total ammoniacal nitrogen (TAN) were found to be statistically insignificant or weak. In addition to lagoon surface temperature, the difference (D) between air temperature and the lagoon surface temperature was also found to influence the NH3 flux, especially when D > 0 (i.e., air hotter than lagoon). This hot-air effect is included in the statistical-observational model obtained in this study, which was used further in the companion study (Part II), to compare the emissions from potential environmental superior technologies to evaluate the effectiveness of each technology.     

Application of a “closed-can” technique for measuring radon exhalation from mine samples of Punjab, Pakistan

Using the closed-can technique, radon exhalation rate measurements have been carried out for shale and coal samples collected from various mines located in the Chakwal and Makarwal areas of Pakistan. For the two areas, the measured average values of the exhalation rates from shale are 1.45±0.13 and 0.67±0.25 Bq m⁻² h⁻¹ and for coal are 1.0±0.03 and 0.65±0.32 Bq m⁻² h⁻¹, respectively. These values are much lower than the measured exhalation rates from alum-shale-based Nordic concrete which has values in the 50–200 Bq m⁻² h⁻¹ range. The lower values of the measured exhalation rates from the shale and coal deposits in the Chakwal and Makarwal areas are indicative of their lower uranium contents and mine workers in these areas do not face any abnormal health hazard due to radon since the exhalation rates have been found to be on the low side.     

A linear and nonlinear approach for interpretation of groundwater quality based on water quality index

In this study using linear and nonlinear approach, aggregate indices for various water quality parameters were analyzed. Using a linear and nonlinear interpolating surface, various water quality variables at grid points were investigated that is essential for mapping. The values help in constituting a key approach for determining the water quality index (WQI), which converts pollutant concentration data into subindex values and then combines them into a single score. One of the biggest advantages of WQI is its summary and intuitive communication capability which will be extremely helpful for demarcating safe aquifer zones of groundwater and in the selection of suitable method for remedial. The present study also describes pollution potential in ground water of Madhya Pradesh, India. The aggregate indices suggest intermediate to high pollution susceptibility in some region of Madhya Pradesh that may increase further if not managed. The overall interpretation of the study will be helpful in formulating suitable approach for water quality interpretation and sustainable planning of groundwater resources.     

Correction to: Water‑induced erosion potentiality and vulnerability assessment in Kangsabati river basin,eastern India

Environment, Development and Sustainability -     

Linking river flow modification with wetland hydrological instability,habitat condition,and ecological responses

Environmental Science and Pollution Research - Flow modification pursuing dams is widely found. Some works also focused on its impact on floodplain wetland hydrology. However, how this change can...     

Nano-inspired systems in food technology and packaging

Creation of food-based nanomaterials for food processing and packaging applications is actually gaining in importance. Indeed, the design of a suitable food carrier system controls the encapsulation efficiency, the product stability and release of bioactives such as micronutrients, antimicrobial compounds and antioxidants. The smaller size of nanomaterials provides higher thermodynamic and kinetic stability. Whereas the higher surface area enhances compound solubility. Nanoemulsions both encapsulate bioactive compounds effectively and address the food safety concerns of the fresh produce associated with foodborne pathogens. Nanoliposomes encapsulate bioactive whey peptides and fat-soluble vitamins with improved functionalities. Encapsulated bioactive molecules are released by diffusion into the surrounding environment after degradation of the surrounding polymeric matrix.     

Complete degradation of di-n-octyl phthalate by Gordonia sp. strain Dop5

The present study describes the assimilation of di-n-octyl phthalate by an aerobic bacterium, isolated from municipal waste-contaminated soil sample utilizing di-n-octyl phthalate as the sole source of carbon and energy. The isolate was identified as Gordonia sp. based on the morphological, nutritional and biochemical characteristics as well as 16S rRNA gene sequence analysis. A combination of chromatographic and spectrometric analyses revealed a complete di-n-octyl assimilation pathway. In the degradation process, mono-n-octyl phthalate, phthalic acid, protocatechuic acid and 1-octanol were identified as the degradation products of di-n-octyl phthalate. Furthermore, phthalic acid was metabolized via protocatechuic acid involving protocatechuate 3,4-dioxygenase while 1-octanol was metabolized by NAD⁺-dependent dehydrogenases to 1-octanoic acid, which was subsequently degraded via β-oxidation, ultimately, leading to tricarboxylic acid cycle intermediates. Apart from phthalic acid and 1-octanol metabolizing pathway enzymes, two esterases, di-n-octyl phthalate hydrolase and mono-n-octyl phthalate hydrolase involved in di-n-octyl phthalate degradation were found to be inducible in nature. This is the first report on the metabolic pathway involved in the complete degradation of di-n-octyl phthalate by a single bacterial isolate, which is also capable of efficiently degrading other phthalate esters of environmental concern having either shorter or longer alkyl chains.     

Determinations of PCB within a project to develop cleanup methods for PCB-containing elastic sealant used in outdoor joints between concrete blocks in buildings

Determinations of PCB were carried out as part of a project aimed at developing cleanup methods for PCB-containing elastic sealant used in outdoor joints between concrete blocks. The goals of the project were to develop methods, which minimise the spread of PCB to the outdoor environment and to indoor air, and which keep the PCB levels as low as reasonably possible in the workplace environment whilst removing the elastic sealant. The following PCB determinations were carried out: (1) concentration in the elastic sealant; (2) concentration in the concrete close to the sealant; (3) concentration in soil; (4) concentration in the indoor air; and (5) concentration in the air in the workplace environment. The cleanup process consisted of a number of different steps: (1) cutting the elastic sealant with an oscillating knife; (2) grinding the concrete with a mechanical machine; (3) sawing the concrete with a mechanical saw and (4) cutting the concrete with a mechanical chisel. In all these different steps a high capacity vacuum cleaner connected to the machines was used. The elastic sealant contained 4.7 to 8.1% total PCB of a technical product with a composition most similar to Clophene A40. The concrete close to the sealant (first 2 mm) contained 0.12 and 1.7% total PCB at two different places. The pattern of the PCB in the concrete resembled that of the sealant. PCB concentrations in the soil from the ground close to the building were 0.1 and 0.3 ppm at two different places before the remedial action. The source of the PCB in the soil is most likely the sealant as the PCB pattern is similar for the two materials. The PCB levels in the workplace air at the beginning of the project, when the techniques were not fully developed, were generally above the occupational exposure limit of 10 micrograms m-3 (up to 120 micrograms m-3). Later when the techniques were optimised to better take care of dust and gases produced during the cutting and grinding etc., the levels were below or close to 10 micrograms m-3. The pattern of the PCB in the workplace air was different from that of the sealant and contained higher levels of lighter components. The PCB concentrations in the indoor air were measured before and during the remedial process. The levels were around 600 ng m-3 and there was no significant increase during the removal of the sealant. The PCB level after the remedial action will be measured later. The pattern of the PCB in the indoor air was different from that of the sealant as well as from that of the workplace air. Higher levels of the lighter PCB were present indoors compared to the composition in both workplace air and in sealant. Extracts of PCB were analysed by GC-MS with a SIM method (selected ion monitoring). Standard procedures were used for extraction of solid materials. For the air samples an OVS tube was used with XAD-2 as adsorbent. The filter and adsorbent were extracted with toluene. This work shows that it is important to perform remedial action of PCB-containing elastic sealant as: (1) there is a spread of PCB to the indoor air giving high enough concentrations to make this the main PCB load on humans living in the apartments studied in this project; (2) large amounts are spread to the soil from these sealants; and (3) many of the PCB-containing elastic sealants used need to be changed from a functional perspective.     

Stability consistency and trend mapping of seasonally inundated wetlands in Moribund deltaic part of India

Environment, Development and Sustainability - The Ganga-Padma moribund deltaic zone contains plenty of small seasonal wetlands. In this paper we mapped the temporal hydrological dynamics of...