Flame retardants and legacy contaminants in polar bears from Alaska, Canada, East Greenland and Svalbard, 2005-2008

Flame retardants and legacy contaminants were analyzed in adipose tissue from 11 circumpolar polar bear (Ursus maritimus) subpopulations in 2005-2008 spanning Alaska east to Svalbard. Although 37 polybrominated diphenyl ethers (PBDEs), total-(α)-hexabromocyclododecane (HBCD), 2 polybrominated biphenyls (PBBs), pentabromotoluene, pentabromoethylbenzene, hexabromobenzene, 1,2-bis(2,4,6-tribromophenoxy(ethane) and decabromodiphenyl ethane were screened, only 4 PBDEs, total-(α-)HBCD and BB153 were consistently found. Geometric mean ΣPBDE (4.6-78.4 ng/g lipid weight (lw)) and BB153 (2.5-81.1 ng/g lw) levels were highest in East Greenland (43.2 and 39.2 ng/g lipid weight (lw), respectively), Svalbard (44.4 and 20.9 ng/g lw) and western (38.6 and 30.1 ng/g lw) and southern Hudson Bay (78.4 and 81.1 ng/g lw). Total-(α)-HBCD levels (<0.3-41.1 ng/g lw) were lower than ΣPBDE levels in all subpopulations except in Svalbard, consistent with greater European HBCD use versus North American pentaBDE product use. ΣPCB levels were high relative to flame retardants as well as other legacy contaminants and increased from west to east (1797-10,537 ng/g lw). ΣCHL levels were highest among legacy organochlorine pesticides and relatively spatially uniform (765-3477 ng/g lw). ΣDDT levels were relatively low and spatially variable (31.5-206 ng/g lw). However, elevated proportions of p,p'-DDT to ΣDDT in Alaska and Beaufort Sea relative to other subpopulations suggested fresh inputs from vector control use in Asia and/or Africa. Comparing earlier circumpolar polar bear studies, ΣPBDE, total-(α)-HBCD, p,p'-DDE and ΣCHL levels consistently declined, whereas levels of other legacy contaminants did not. International regulations have clearly been effective in reducing levels of several legacy contaminants in polar bears relative to historical levels. However, slow or stalling declines of certain historic pollutants like PCBs and a complex mixture of "new" chemicals continue to be of concern to polar bear health and that of their arctic marine ecosystems.     

Energy efficiency of substance and energy recovery of selected waste fractions

In order to reduce the ecological impact of resource exploitation, the EU calls for sustainable options to increase the efficiency and productivity of the utilization of natural resources. This target can only be achieved by considering resource recovery from waste comprehensively. However, waste management measures have to be investigated critically and all aspects of substance-related recycling and energy recovery have to be carefully balanced. This article compares recovery methods for selected waste fractions with regard to their energy efficiency.Whether material recycling or energy recovery is the most energy efficient solution, is a question of particular relevance with regard to the following waste fractions: paper and cardboard, plastics and biowaste and also indirectly metals. For the described material categories material recycling has advantages compared to energy recovery. In accordance with the improved energy efficiency of substance opposed to energy recovery, substance-related recycling causes lower emissions of green house gases.For the fractions paper and cardboard, plastics, biowaste and metals it becomes apparent, that intensification of the separate collection systems in combination with a more intensive use of sorting technologies can increase the extent of material recycling. Collection and sorting systems must be coordinated. The objective of the overall system must be to achieve an optimum of the highest possible recovery rates in combination with a high quality of recyclables.The energy efficiency of substance related recycling of biowaste can be increased by intensifying the use of anaerobic technologies. In order to increase the energy efficiency of the overall system, the energy efficiencies of energy recovery plants must be increased so that the waste unsuitable for substance recycling is recycled or treated with the highest possible energy yield.     

International comparative study of 3R and waste management policy developments

Reduce, reuse, and recycle (3R) policies form the basis of waste management and global warming countermeasures globally, so we conducted a comparative study of 3R and waste management policies in the European Union (EU), USA, Korea, Japan, China, and Vietnam. An international workshop for 3R and waste management policymakers was held in Kyoto, Japan, and a bibliographic survey was also conducted to collect data. 3R policies are clearly given priority in the hierarchy of waste management in every country studied. Thermal recovery, which includes power generation from waste heat and methane gas collected from organic waste, is also a priority; this is consistent with the increased use of countermeasures to reduce greenhouse gas (GHG) emissions. In the EU, waste management is characterized by practical and effective 3R policies through the development of realistic regulations and by the policymakers??desire to simplify management systems. The policy ideal in China, however, is the development of a circular economy that targets reductions in the amount and hazardousness of waste. Limits on the number of final disposal sites, strategies for procuring resources, and GHG emission countermeasures are closely linked with 3R policies, and further development of 3R policies in parallel with such issues is expected.     

Fluorescence Verses Radioactivity Labeling for Lab-Scale Investigation of the Fate of Water-Soluble Polymers in Wastewater Treatment Plants

Water-soluble synthetic polymers are extensively used in cosmetics, detergents and paints. Many end up in wastewater and, later on, in wastewater-treatment plants. In order to gain an insight into their fate in such plants, fluorescence and radioactivity labelings were compared using a lab-scale reactor designed to mimic industrial conditions. Two fermentation media were considered, namely a mixture of E402 and E204 micro-organisms and an activated sludge collected from a water-treatment plant located in the south of France. A sample of low molar mass commercial poly(acrylic acid) (PAA) was labeled by radioactivity with tritium and by coupling the 6-aminofluorescein fluorescent dye. Labeled PAA-containing sludges were allowed to ferment. To monitor the fate of the polymers, aliquots of the fermented mixtures were withdrawn at selected times and centrifuged. Liquid and solid phases were analyzed by scintigraphy or UV spectrometry, depending of the labeling techniques. Both techniques led to similar distributions, c.a. 75% in the supernatant and 25% in the solid phase. Distributions remained constant during the biological tests. There was no degradation of the commercial PAA after aqueous size exclusion chromatography (SEC), in agreement with literature. These features showed that fluorescence-labeling can be used instead of the complex and expensive radiolabeling. The validated fluorescence-based method was then applied to a linear poly(acrylic acid) synthesized by ATRP and labeled with 6-aminofluorescein. There was no significant difference between the commercial and the linear poly(acrylic acid)s. In contrast, a linear PAA with 5% of tert-butyl ester repeating units was predominantly found in the solid phase although adsorption or absorption by micro-organisms could not be demonstrated. The method based on fluorescence labeling should be applicable to other water soluble polymers provided that the dye remains attached to the polymer as it was the case for the studied poly(acrylic acid)s.     

Multi-decadal changes in tundra environments and ecosystems: synthesis of the International Polar Year-Back to the Future project (IPY-BTF)

Understanding the responses of tundra systems to global change has global implications. Most tundra regions lack sustained environmental monitoring and one of the only ways to document multi-decadal change is to resample historic research sites. The International Polar Year (IPY) provided a unique opportunity for such research through the Back to the Future (BTF) project (IPY project #512). This article synthesizes the results from 13 papers within this Ambio Special Issue. Abiotic changes include glacial recession in the Altai Mountains, Russia; increased snow depth and hardness, permafrost warming, and increased growing season length in sub-arctic Sweden; drying of ponds in Greenland; increased nutrient availability in Alaskan tundra ponds, and warming at most locations studied. Biotic changes ranged from relatively minor plant community change at two sites in Greenland to moderate change in the Yukon, and to dramatic increases in shrub and tree density on Herschel Island, and in subarctic Sweden. The population of geese tripled at one site in northeast Greenland where biomass in non-grazed plots doubled. A model parameterized using results from a BTF study forecasts substantial declines in all snowbeds and increases in shrub tundra on Niwot Ridge, Colorado over the next century. In general, results support and provide improved capacities for validating experimental manipulation, remote sensing, and modeling studies.     

Physico-chemical characteristics of well waters in four urban centers in Southern Nigeria

An ensemble of thirty physico-chemical characteristics was used to assess the quality of well waters in four urban centers in southern Nigeria: Lagos, Benin City, Warri, and Ekpoma. The characteristics investigated include pH; color; turbidity; salinity; electrical conductivity, EC; total dissolved solids, TDS; total suspended solids, TSS; dissolved oxygen, DO; total hydrocarbon, THC; biochemical oxygen demand, BOD; chemical oxygen demand, COD; and nitrate, nitrite, ammonia, sulfate, and phosphate concentrations. Also monitored were the concentrations of sodium, calcium, potassium, magnesium, chloride, bicarbonate, iron, lead, copper, manganese, zinc, chromium, nickel, and cadmium. The results obtained were compared with World Health Organization, WHO, and Nigerian Federal Ministry of Environment, FME, drinking water standards. The results show that with the well water obtained from Lagos, turbidity, 11.80 NTU; pH, 5.68; EC, 1065.55 μS/cm; TDS, 539.00 mg/L; concentrations of iron, 1.83 mg/L; manganese, 0.14 mg/L; and lead, 1.35 mg/L did not meet the WHO standards. In Warri, pH, 5.19; concentrations of lead, 1.35 mg/L; and chromium, 0.10 mg/L in the well water were above the WHO desirable limits. The results also indicated that the well water from Benin City contained concentrations of chromium, 0.18 mg/L; and lead, 0.20 mg/L that exceeded the recommended WHO limits. In Ekpoma, the pH, 6.00; concentrations of chromium, 0.15 mg/L; and lead, 0.44 mg/L were higher than the desirable limits of WHO. Generally, the assessments revealed that the waters were good and fit for drinking and other domestic application without serious threat to public health.     

Effect of metal accumulation on metallothionein level and condition of the periwinkle Littorina littorea along the Scheldt estuary (the Netherlands)

Metal (i.e. Ag, As, Ca, Cd, Co, Cu, Mn, Pb and Zn) and metallothionein (MT) concentrations in the soft tissue of Littorina littorea were measured along the heavily polluted Western Scheldt (WS) and relatively clean Eastern Scheldt (ES) estuary. Along the WS metal and MT levels in periwinkles reflected the known downstream decreasing pollution gradient. Surprisingly in ES animals As, Mn and Zn concentrations decreased from east to west reflecting past pollution. Compared to the WS metal concentrations of ES periwinkles were significantly lower and both estuaries were maximally discriminated from each other based on their Cd soft tissue concentration using a canonical discriminant analysis. Furthermore, no overall difference was found in MT levels among animals from both estuaries. Using previously obtained condition data (i.e. dry/wet weight ratio and lipid content) the relation between soft tissue metal concentration (i.e. Cd, Cu and Zn) and fitness indicators (i.e. MT and condition data) was examined using a canonical correlation analysis. Periwinkles with a high metal load (i.e. Cd and Zn) also had high MT levels but were in a relatively poor condition.     

Fenton-like oxidation and mineralization of phenol using synthetic Fe(II)–Fe(III) green rusts

Background, aim, and scope  

In literature, the environmental applications of green rust (GR) have mainly been pointed out through the reduction of inorganic contaminants and the reductive dechlorination of chlorinated organics. However, reactions involving GR for the oxidation and mineralization of organic pollutants remain very scantly described. In this study, the ability of three synthetic Fe(II)–Fe(III) green rusts, GR(CO₃²⁻), GR(SO₄²⁻), and GR(Cl⁻), to promote Fenton-like reaction was examined by employing phenol as a model pollutant. Unlike the traditional Fenton’s reagent (dissolved Fe(II) + H₂O₂), where the pH values have to be lowered to less than 4, the proposed reaction can effectively oxidize the organic molecules at neutral pH and could avoid the initial acidification which may be costly and destructive for the in situ remediation of contaminated groundwater and soils. The green rust reactivity towards the oxidative transformation of phenol was thoroughly evaluated by performing a large kinetic study, chemical analyses, and spectroscopic investigations.     

Trapping efficiencies of cultivated and natural riparian vegetation of northern Laos

In northern Laos, intensification of cultivation on sloping land leads to accelerated erosion processes. Management of riparian land may counteract the negative impacts of higher sediment delivery rates on water quality. This study assessed water and sediment concentration trapping efficiencies of riparian vegetation in northern Laos and the effect of cultivation of riparian land on water quality. Runoff flowing in and out of selected riparian sites was monitored by means of open troughs. In 2005, two native grass, two bamboo, and two banana sites were monitored. In 2006, adjacent to steep banana, bamboo, and native grass sites, three upland rice sites were established and monitored. Water trapping efficiency (WTE) and sediment concentration trapping efficiency (SCTE) were calculated on an event basis; means and 95% confidence intervals (CIs) were estimated with a bootstrapping approach. Confidence intervals were large and overlapping among sites. Seepage conditions severely limited trapping efficiency. Native grass resulted in the highest WTE (95% CI, -0.10 to 0.23), which was not significantly different from zero. Banana resulted in the highest SCTE (95% CI, 0.06-0.40). Bamboo had negative WTE and SCTE. Median outflow runoff from rice sites was nine times the inflow. Median outflow sediment concentration from rice sites was two to five times that of their adjacent sites and two to five times the inflow sediment concentration. Although low-tillage banana plantation may reduce sediment concentration of runoff, cultivation of annual crops in riparian land leads to delivery of turbid runoff into the stream, thus severely affecting stream water quality.     

Simulating sulfadimidine transport in surface runoff and soil at the microplot and field scale

To prevent residues of veterinary medicinal products (VMPs) from contaminating surface waters and ground water, an environmental impact assessment is required before a new product is allowed on the market. Physically based simulation models are advocated for the calculation of predicted environmental concentrations at higher tiers of the assessment process. However, the validation status of potentially useful models is poor for VMP transport. The objective of this study was to evaluate the dual-permeability model MACRO for simulation of transport of sulfonamide antibiotics in surface runoff and soil. Special focus was on effects of solute application in liquid manure, which may alter the hydraulic properties at the soil surface. To this end we used data from a microplot runoff experiment and a field experiment, both conducted on the same clay loam soil prone to preferential flow. Results showed that the model could accurately simulate concentrations of sulfadimidine and the nonreactive tracer bromide in runoff and in soil from the microplot experiments. The use of posterior parameter distributions from calibrations using the microplot data resulted in poor simulations for the field data of total sulfadimidine losses. The poor results may be due to surface runoff being instantly transferred off the field in the model, whereas in reality re-infiltration may occur. The effects of the manure application were reflected in smaller total and micropore hydraulic conductivities compared with the application in aqueous solution. These effects could easily be accounted for in regulatory modeling.