Development of a hybrid photo-bioreactor and nanoparticle adsorbent system for the removal of CO2 , and selected organic and metal co-pollutants

Fossil fuel combustion and many industrial processes generate gaseous emissions that contain a number of toxic organic pollutants and carbon dioxide (CO₂) which contribute to climate change and atmospheric pollution. There is a need for green and sustainable solutions to remove air pollutants, as opposed to conventional techniques which can be expensive, consume additional energy and generate further waste. We developed a novel integrated bioreactor combined with recyclable iron oxide nano/micro-particle adsorption interfaces, to remove CO_2, and undesired organic air pollutants using natural particles, while generating oxygen. This semi-continuous bench-scale photo-bioreactor was shown to successfully clean up simulated emission streams of up to 45% CO₂ with a conversion rate of approximately 4% CO₂ per hour, generating a steady supply of oxygen (6 mmol/hr), while nanoparticles effectively remove several undesired organic by-products. We also showed algal waste of the bioreactor can be used for mercury remediation. We estimated the potential CO₂ emissions that could be captured from our new method for three industrial cases in which, coal, oil and natural gas were used. With a 30% carbon capture system, the reduction of CO₂ was estimated to decrease by about 420,000, 320,000 and 240,000 metric tonnes, respectively for a typical 500 MW power plant. The cost analysis we conducted showed potential to scale-up, and the entire system is recyclable and sustainable. We further discuss the implications of usage of this complete system, or as individual units, that could provide a hybrid option to existing industrial setups.     

Age-related multi-year associations in female humpback whales (Megaptera novaeangliae)

Analyses of social structures in baleen whales are rare, and so far, they are thought to consist of mostly short and unstable associations. We investigated the association patterns of individual humpback whales from a summer feeding aggregation in the Gulf of St. Lawrence from 1997 to 2005. Photo-identified animals were sexed using genetic methods and were grouped into five categories: juvenile males/females, mature males and lactating/non-lactating females. We calculated half-weight association indices within and between the groups and found that 45% of the observation showed single animals and another 45% small groups (two to three) consisting mainly of mature animals besides lactating females. Using permutation tests, we found evidence for long-term associations between mature males and non-lactating females as well as among non-lactating females. Standardised lagged association rates revealed that these male–female groups disassociated quickly over about 2 weeks, whereas associations increased again towards the beginning of the breeding season. Non-lactating females of similar age engaged in multi-seasonal stable pairs for up to six consecutive feeding seasons; no mature male–female association was observed in consecutive years. The females with the most stable and long-term associations also had the highest reproductive output. While the risk of predation could not explain these long-term bonds, feeding cooperation seemed the most plausible explanation for group forming behaviour during the summer months.     

Large-scale patterns of shell variation in Littorina striata, a planktonic developing periwinkle from Macaronesia (Mollusca: Prosobranchia)

Littorina striata King and Broderip, 1832 is a strictly Macaronesian, intertidal periwinkle with planktonic development. The species displays a high degree of shell variation involving size and sculpture (nodulose vs smooth shells). The present work provides a preliminary account of some aspects of this shell variation on wave-exposed shores over the entire geographical range of the species. Based on morphological patterns observed among other prosobranchs it was predicted that southern specimens of L. littorina should on the average be larger, heavier, more nodulose, and should show more shell repair marks, than northern specimens. These expectations were confirmed for shell size and weight. In contrast, there was no consistent pattern in nodulosity between archipelagos, even though there were differences at much smaller scales. Shell repair marks were more prevalent in northern populations, but this trend was only due to a significant N–S difference among nodulose shells. This is surprising as nodulose shells displayed significantly fewer shell repair marks than smooth shells. These observations were tentatively interpreted as a function of presumed differential N–S patterns of wave action and ambient temperatures. In this context, wave action in Macaronesia seems to increase in the south (contrary to what current theories predict). This atypical situation may confound the interpretation of morphological patterns in L. striata so that firm conclusions cannot be drawn without further experimental work at different spatial scales. Nevertheless, it seems that generalisations about macrogeographic shell morphology patterns, based on interspecific comparisons, are not directly applicable to intraspecific patterns, and may strongly depend on local conditions which make adequate sampling and data treatment very difficult. Received: 10 September 1997 / Accepted: 15 January 1998     

Online elemental analysis of process gases with ICP-OES: A case study on waste wood combustion

A mobile sampling and measurement system for the analysis of gaseous and liquid samples in the field was developed. An inductively coupled plasma optical emission spectrometer (ICP-OES), which is built into a van, was used as detector. The analytical system was calibrated with liquid and/or gaseous standards. It was shown that identical mass flows of either gaseous or liquid standards resulted in identical ICP-OES signal intensities. In a field measurement campaign trace and minor elements in the raw flue gas of a waste wood combustor were monitored. Sampling was performed with a highly transport efficient liquid quench system, which allowed to observe temporal variations in the elemental process gas composition. After a change in feedstock an immediate change of the element concentrations in the flue gas was detected. A comparison of the average element concentrations during the combustion of the two feedstocks showed a high reproducibility for matrix elements that are expected to be present in similar concentrations. On the other hand elements that showed strong differences in their concentration in the feedstock were also represented by a higher concentration in the flue gas. Following the temporal variations of different elements revealed strong correlations between a number of elements, such as chlorine with sodium, potassium and zinc, as well as arsenic with lead, and calcium with strontium.     

Chamber studies on mass-transfer of di(2-ethylhexyl)phthalate (DEHP) and di-n-butylphthalate (DnBP) from emission sources into house dust

For a number of phthalates and especially for di(2-ethylhexyl)phthalate (DEHP), surprisingly high house dust concentrations are reported in the literature. Therefore, the uptake of the most prominent compounds DEHP and di-n-butylphthalate (DnBP) from plasticized indoor materials into house dust samples of different organic content has been experimentally determined. The experiments have been performed within 45 days which is sufficient for the more volatile phthalate (DnBP) to reach equilibrium conditions. DnBP reaches considerably higher concentrations in the chamber air compared to real room measurements and, thus, also elevated dust concentrations. In contrast, the mass transfer of DEHP in the dust via the gas phase was significantly lower. However, small chamber experiments showed elevated mass transfer of DEHP in case of direct contact between emission source and sink. This aspect is experimentally determined using an plasticized PVC polymer with and without direct contact to house dust. A transfer into the dust could be observed in dependence of the initial concentration in the material. However, the results do not allow the differentiation between the two uptake mechanisms via capillary forces and contact to the material’s boundary layer. The results illustrate that the reasons for elevated DEHP concentrations in dust indoors can be traced back to direct contact of source and sink, abrasion from the source, and transport via airborne particles.     

Source Reduction and the Waste Management Hierarchy

Source reduction and the waste management hierarchy have become the subject of considerable controversy. This paper describes the two extreme positions on source reduction and places them in context in the debate on how to better manage waste. It uses case studies to illustrate that the polar positions are ideological and that such simplistic views lead to inaction. It argues for compromise positions and emphasizes that improved hazardous substances management will come about not through further debate but through implementing solutions on a case-by-case basis. Some measures may prove appropriate only for certain plants and operations; other measures may apply across an entire industry.     

Survival of weed seeds and animal parasites as affected by anaerobic digestion at meso- and thermophilic conditions

Anaerobic digestion of residual materials from animals and crops offers an opportunity to simultaneously produce bioenergy and plant fertilizers at single farms and in farm communities where input substrate materials and resulting digested residues are shared among member farms. A surplus benefit from this practice may be the suppressing of propagules from harmful biological pests like weeds and animal pathogens (e.g. parasites). In the present work, batch experiments were performed, where survival of seeds of seven species of weeds and non-embryonated eggs of the large roundworm of pigs, Ascaris suum, was assessed under conditions similar to biogas plants managed at meso- (37 °C) and thermophilic (55 °C) conditions. Cattle manure was used as digestion substrate and experimental units were sampled destructively over time. Regarding weed seeds, the effect of thermophilic conditions (55 °C) was very clear as complete mortality, irrespective of weed species, was reached after less than 2 days. At mesophilic conditions, seeds of Avena fatua, Sinapsis arvensis, Solidago canadensis had completely lost germination ability, while Brassica napus, Fallopia convolvulus and Amzinckia micrantha still maintained low levels (～1%) of germination ability after 1 week. Chenopodium album was the only weed species which survived 1 week at substantial levels (7%) although after 11 d germination ability was totally lost. Similarly, at 55 °C, no Ascaris eggs survived more than 3 h of incubation. Incubation at 37 °C did not affect egg survival during the first 48 h and it took up to 10 days before total elimination was reached. In general, anaerobic digestion in biogas plants seems an efficient way (thermophilic more efficient than mesophilic) to treat organic farm wastes in a way that suppresses animal parasites and weeds so that the digestates can be applied without risking spread of these pests.     

Energy or compost from green waste? – A CO2 – Based assessment

Green waste is increasingly extracted from the material recycling chain and, as a result of the financial subsidy arising from the German renewable energy law for the generation of energy from renewable raw materials; it is fed into the energy recovery process in biomass power stations. A reduction in climate relevant gases is also linked to the material recovery of green waste – in particular when using composts gained from the process as a new raw material in different types of potting compost and plant culture media as a replacement for peat. Unlike energy recovery, material valorisation is not currently subsidised. Through the analysis of material and energy valorisation methods for green waste, with particular emphasis on primary resource consumption and CO₂-balance, it could be determined that the use of green waste for energy generation and its recovery for material and peat replacement purposes can be considered to be on a par. Based on energy recovery or material oriented scenarios, it can be further deduced that no method on its own will achieve the desired outcome and that a combination of recycling processes is more likely to lead to a significant decrease of greenhouse gas emissions.