Acetylcholinesterase in honey bees (Apis mellifera) exposed to neonicotinoids, atrazine and glyphosate: laboratory and field experiments

In Québec, as observed globally, abnormally high honey bee mortality rates have been reported recently. Several potential contributing factors have been identified, and exposure to pesticides is of increasing concern. In maize fields, foraging bees are exposed to residual concentrations of insecticides such as neonicotinoids used for seed coating. Highly toxic to bees, neonicotinoids are also reported to increase AChE activity in other invertebrates exposed to sub-lethal doses. The purpose of this study was therefore to test if the honey bee’s AChE activity could be altered by neonicotinoid compounds and to explore possible effects of other common products used in maize fields: atrazine and glyphosate. One week prior to pollen shedding, beehives were placed near three different field types: certified organically grown maize, conventionally grown maize or non-cultivated. At the same time, caged bees were exposed to increasing sub-lethal doses of neonicotinoid insecticides (imidacloprid and clothianidin) and herbicides (atrazine and glyphosate) under controlled conditions. While increased AChE activity was found in all fields after 2 weeks of exposure, bees close to conventional maize crops showed values higher than those in both organic maize fields and non-cultivated areas. In caged bees, AChE activity increased in response to neonicotinoids, and a slight decrease was observed by glyphosate. These results are discussed with regard to AChE activity as a potential biomarker of exposure for neonicotinoids.     

Guidance for the Performance Evaluation of Three-Dimensional Air Quality Modeling Systems for Particulate Matter and Visibility

ABSTRACT

Guidance for the performance evaluation of three-dimensional air quality modeling systems for particulate matter and visibility is presented. Four levels are considered: operational, diagnostic, mechanistic, and probabilistic evaluations. First, a comprehensive model evaluation should be conducted in at least two distinct geographical locations and for several meteorological episodes. Next, streamlined evaluations can be conducted for other similar applications if the comprehensive evaluation is deemed satisfactory. In all cases, the operational evaluation alone is insufficient, and some diagnostic evaluation must always be carried out. Recommendations are provided for designing field measurement programs that can provide the data needed for such model performance evaluations.     

Study of the Relationship of Distant SO2 Emissions to Dallas-Fort Worth Winter Haze

ABSTRACT

A study was conducted to estimate the changes in wintertime visual air quality in Dallas-Fort Worth (DFW) that might occur due to proposed reductions in SO₂ emissions at two steam electric generating plants in eastern Texas, each over 100 km from the city. To provide information for designing subsequent investigations, the haze was characterized broadly during the first year of the study. Meteorological data acquired then demonstrated that, during haze episodes, emissions from only one of the two plants were likely to be transported directly to DFW. Therefore, the second year of the study was centered on just one of the power plants. Air quality was then characterized within the urban area and at rural locations that would be upwind and downwind of the plant during transport to DFW. An instrumented aircraft measured plume dispersion and the air surrounding the plume on selected days. A mathematical model was used to predict the change that would occur in airborne particulate matter concentrations in DFW if SO₂ emissions were reduced to reflect the proposed limitations. The contribution of particles in the atmosphere to light extinction was estimated, and simulated photographs were produced to illustrate the visibility changes. The study concluded that the proposed emission reductions would, at most, subtly change perceived wintertime visibility.     

Modeling of Potential Power Plant Plume Impacts on Dallas-Fort Worth Visibility

ABSTRACT

During wintertime, haze episodes occur in the Dallas-Ft. Worth (DFW) urban area. Such episodes are characterized by substantial light scattering by particles and relatively low absorption, leading to so-called “white haze.” The objective of this work was to assess whether reductions in the emissions of SO₂ from specific coal-fired power plants located over 100 km from DFW could lead to a discernible change in the DFW white haze. To that end, the transport, dispersion, deposition, and chemistry of the plume of a major power plant were simulated using a reactive plume model (ROME). The realism of the plume model simulations was tested by comparing model calculations of plume concentrations with aircraft data of SF₆ tracer concentrations and ozone concentrations. A second-order closure dispersion algorithm was shown to perform better than a first-order closure algorithm and the empirical Pasquill-Gifford-Turner algorithm. For plume impact assessment, three actual scenarios were simulated, two with clear-sky conditions and one with the presence of fog prior to the haze. The largest amount of sulfate formation was obtained for the fog episode. Therefore, a hypothetical scenario was constructed using the meteorological conditions of the fog episode with input data values adjusted to be more conducive to sulfate formation. The results of the simulations suggest that reductions in the power plant emissions lead to less than proportional reductions in sulfate concentrations in DFW for the fog scenario. Calculations of the associated effects on light scattering using Mie theory suggest that reduction in total (plume + ambient) light extinction of less than 13% would be obtained with a 44% reduction in emissions of SO₂ from the modeled power plant.     

Distribution of Hg,As and Se in material and flue gas streams from preheater–precalciner cement kilns and vertical shaft cement kilns in China

The aim of this study was to evaluate the behavior of Hg, As, and Se in cement production. Two types of cement plants were studied, including the vertical shaft kiln (VSK) and preheater–precalciner kiln (PPK) processes. Determination of Hg, As, and Se in the main material and gas streams were performed. It was found that recycling of particulate matter captured by an air pollution control device caused a significant enrichment of Hg and As inside both processes. The total quantity of Hg entering the process and the quantity emitted to the atmosphere were found to be 10–109 and 6.3–38 mg, respectively, per ton of clinker produced. The average Hg emission was calculated to be around 41% of the total mercury input. The emissions found complied with the European Union (EU) limit and exceeded partly the U.S. limit. Furthermore, it was found that oxidized mercury was the dominant species in the PPK process, whereas the reduced form was dominant in the VSK process, due to the oxidizing and reducing gas conditions, respectively. Regarding the distribution of As and Se, the major amounts were bound to the solid materials, that is, cement clinker and particulate matter. Based on cement production data in China in 2013, the annual emissions of Hg and As were estimated to be in the range of 8.6–52 and 4.1–9.5 tons, respectively.

Implications: There are fairly limited studies on Hg, As, and Se measurements from cement manufacturing facilities in China, and even more limited studies on the behavior in vertical shaft kilns. The needs for increased emission reduction efforts in energy-intensive industries are globally recognized, and an improved understanding of the processes ongoing in a cement kilns system is decisive. Since the processes are complex and almost impossible to recreate in the laboratory, field measurements are indeed important. The findings in the present study were solely based on field measurements and the data are considered to be valuable for the further development of emission reduction technology.     

Hormesis and longevity with tannins: Free of charge or cost-intensive?

Hormetic lifespan extension is, for obvious reasons, beneficial to an individual. But is this effect really cost-neutral? To answer this question, four tannic polyphenols were tested on the nematode Caenorhabditis elegans. All were able to extend the lifespan, but only some in a hormetic fashion. Additional life trait variables including stress resistance, reproductive behavior, growth, and physical fitness were observed during the exposure to the most life extending concentrations. These traits represent the quality of life and the population fitness, being the most important parameters of a hormetic treatment besides lifespan. Indeed, it emerged that each life-extension is accompanied by a constraining effect in at least one other endpoint, for example growth, mobility, stress resistance, or reproduction. Thus, in this context, longevity could not be considered to be attained for free and therefore it is likely that other hormetic benefits may also incur cost-intensive and unpredictable side-effects.     

水环境中镍毒性的机制研究：有害结局路径(AOP)分析

目前对镍(Ni)生态风险评估和水质法规采用了基于机制的预测工具,如生物配体模型(BLMs)。然而,尽管有许多具体细致的研究,Ni对水生生物毒性的精确机制仍然难以确定。对Ni行为机制的不确定性导致了大家在一些管理设置中应用像BLM这样的工具时,有所顾虑。为了解决这一认知差距,作者使用了有害结局路径(AOP)分析,也是第一个用于金属的AOP分析,来确定Ni毒性的多种潜在机制以及它们与淡水水生生物的相互作用。在金属的分子起始事件(molecular initiating events)在分类群中可能存在的前提下,在许多不同种水生和陆生生物数据的基础上,考虑建立一种潜在的行为机制。通过分析,作者识别了Ni可能对水生生物产生毒性的5个潜在的分子起始事件：Ca²⁺体内平衡的破坏,Mg²⁺体内平衡的破坏,Fe²⁺/³⁺体内平衡的破坏,活性氧类物质引起的氧化损伤,以及呼吸上皮细胞的过敏反应。在生物组织的器官水平,这5个潜在的分子起始事件会分解成3个可能的途径：支持外骨骼、外壳和骨骼生长的Ca²⁺减少;呼吸受损;细胞毒性和肿瘤形成。在整个生物体的水平,器官水平的反应将可能导致生长、繁殖的降低和/或能量代谢的改变,并且在每个通路之间有几个潜在的反馈回路。总体来说,目前的AOP分析可指导Ni的毒性机制研究,并为其他金属开发AOPs提供了有效的参考。
精选自Brix, K. V., Schlekat, C. E. and Garman, E. R. (2017), The mechanisms of nickel toxicity in aquatic environments: An adverse outcome pathway analysis. Environmental Toxicology and Chemistry, 36: 1128–1137. doi: 10.1002/etc.3706
详情请见http://onlinelibrary.wiley.com/wol1/doi/10.1002/etc.3706/full
     

Modeling forest floor contribution to phosphorus supply to maritime pine seedlings in two-layered forest soils

The quantitative contribution of the forest floor to P nutrition of maritime pine seedlings was experimentally determined by Jonard et al. (2009) in a greenhouse experiment using the radio-isotopic labeling. To extend the results of the experiment on a known mineral soil, a modeling approach was developed to predict P uptake of maritime pine seedlings growing in a mineral soil covered with a forest floor layer. The classical nutrient uptake model based on the diffusion/mass-flow theory was extended to take into account mineralization of P in dead organic matter, microbial P immobilization and re-mineralization and P leaching. In addition, the buffer power characterizing the P retention properties of the mineral soil was allowed to vary with time and with the P-ion concentration in solution. To account for increasing root competition with time, a moving boundary approach was implemented. According to the model, the forest floor contributed most of the P supply to the seedlings (99.3% after 130 days). Predicted P uptake was consistent with observed P uptake and modeling efficiency was 0.97. The uptake model was then used to evaluate the impact of the P retention properties of the mineral soil on the contribution of the forest floor to P uptake. Simulations showed that the contribution of the forest floor was much lower in the quasi non-reactive soil (45.7%) but rapidly increased with soil P reactivity.     

Functional traits and the growth-mortality trade-off in tropical trees

A trade-off between growth and mortality rates characterizes tree species in closed canopy forests. This trade-off is maintained by inherent differences among species and spatial variation in light availability caused by canopy-opening disturbances. We evaluated conditions under which the trade-off is expressed and relationships with four key functional traits for 103 tree species from Barro Colorado Island, Panama. The trade-off is strongest for saplings for growth rates of the fastest growing individuals and mortality rates of the slowest growing individuals (r2 = 0.69), intermediate for saplings for average growth rates and overall mortality rates (r2 = 0.46), and much weaker for large trees (r2 < or = 0.10). This parallels likely levels of spatial variation in light availability, which is greatest for fast- vs. slow-growing saplings and least for large trees with foliage in the forest canopy. Inherent attributes of species contributing to the trade-off include abilities to disperse, acquire resources, grow rapidly, and tolerate shade and other stresses. There is growing interest in the possibility that functional traits might provide insight into such ecological differences and a growing consensus that seed mass (SM), leaf mass per area (LMA), wood density (WD), and maximum height (H(max)) are key traits among forest trees. Seed mass, LMA, WD, and H(max) are predicted to be small for light-demanding species with rapid growth and mortality and large for shade-tolerant species with slow growth and mortality. Six of these trait-demographic rate predictions were realized for saplings; however, with the exception of WD, the relationships were weak (r2 < 0.1 for three and r2 < 0.2 for five of the six remaining relationships). The four traits together explained 43-44% of interspecific variation in species positions on the growth-mortality trade-off; however, WD alone accounted for > 80% of the explained variation and, after WD was included, LMA and H(max) made insignificant contributions. Virtually the full range of values of SM, LMA, and H(max) occurred at all positions on the growth-mortality trade-off. Although WD provides a promising start, a successful trait-based ecology of tropical forest trees will require consideration of additional traits.     

Field Trial of Biosparging with Oxygen for Bioremediation of Volatile Organic Compounds

Xpert Design & Diagnostics, LLC (XDD), & Conestoga‐Rovers and Associates (CRA) conducted a biosparging field trial at a Superfund site in New Jersey. The biosparging field trial proved that biosparging with oxygen was very effective in promoting the biological destruction of benzene. The approximately 265‐day period of oxygen injection successfully reduced benzene concentrations by several orders of magnitude, or even to non‐detect values, at least 40 feet from the point of injection. Through co‐precipitation of arsenic with oxidized iron, biosparging also effectively reduced total concentrations of arsenic and iron in groundwater. Based on the results of the biosparging field trial, the final remedy for the site has been amended to include the use of biosparging technology as an alternative to groundwater pumping and aboveground treatment in select locations. © 2001 John Wiley & Sons,Inc.