Half-lives of tetra-, penta-, hexa-, hepta-, and octachlorodibenzo-p-dioxin in rats,monkeys, and humans--a critical review

The elimination half-lives (t1/2) in Sprague-Dawley rats for 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), 1,2, 3,7,8-pentachlorodibenzo-p-dioxin (PeCDD), 1,2,3,4,7,8-hexachlorodibenzo-p-dioxin (HxCDD), 1,2,3,4,6,7,8-heptachlorodibenzo-p-dioxin (HpCDD) and 1,2,3,4,6,7,8,9-octachlorodibenzo-p-dioxin (OCDD) were estimated in long-term studies by Schlatter, Poiger and others. Furthermore, there are some published half-lives of TCDD in adult humans. The average half-life of TCDD in adult humans is approximately 2840 days, while in Sprague-Dawley rats the average t1/2 of TCDD is 19 days. The t1/2 of TCDD in humans is about 150 times that of rats. This factor was used to calculate the t1/2 values of the other polychlorinated dibenzo-p-dioxins (PCDDs) in humans from the rat data. Furthermore, the terminal t1/2 values of PCDDs in adult humans were calculated from the regression equation: logt1/2H = 1.34 logt1/2R + 1.25 which was recently established for 50 xenobiotics (t1/2H = terminal half-lives in days for humans, t1/2R = terminal half-lives in days for rats). The following terminal half-lives in adult humans were obtained: 12.6 years for 1,2,3,7,8-PeCDD, 26-45 years for 1,2,3,4,7,8-HxCDD, 80-102 years for 1,2,3,4,6,7,8-HpCDD and ca. 112-132 years for OCDD. These half-lives of PCDDs are critically compared with measured t1/2 values of PCDDs and other persistent organic pollutants in rats, monkeys and humans.     

Suitability of ignition source “exploding wire” for determination of dust explosion characteristics in the 20-L-sphere

Several safety characteristics of dusts are determined in the 20-L-sphere (also known as SIWEK Chamber) according to international standards. Dust cloud ignition is carried out using pyrotechnical igniters. Due to various disadvantages of such igniters the need for alternative ignition sources arises again and again. An alternative could be an ignition source which is known as “exploding wire” or “fuse wire”. The paper presents test results of a comparative study between both ignition sources for the determination of the safety characteristics “Maximum Explosion Pressure” and “Maximum Rate of Explosion Pressure Rise” of five selected dusts in the 20-L-sphere. In addition to that the ignition mechanisms of both ignition sources were analyzed by high speed camera recordings and the ignition energy was determined with electric and calorimetric recordings. The paper shows results of measurements of the ignition energy of both ignition sources as well as sequences of the flame propagation.     

Is the convenience yield a good indicator of a commodity's supply risk?

A strong increase in the demand for some commodities over the last decade will have a major impact on their future supply situation. Of increasing importance, therefore, is an assessment of a commodity's criticality, and especially its supply risk, by appropriate indicators. The literature has proposed numerous indicators of the supply risk. Here, we use the convenience yield of commodity futures as a supply risk indicator to address some of the major shortcomings of existing indicators, especially regarding their predictive power. This paper aims to test the applicability of the convenience yield as an indicator of a commodity's future supply risk. Therefore, we calculate historical convenience yields for 3-, 15-, and 27-month futures contracts for five major industrial metals (aluminum, copper, lead, nickel, and zinc) during the period 1999 to 2011. We compare the convenience yields at the beginning of the contract period to known indicators at maturity to find that the convenience yield has generally predictive power for the static stock lifetime (i.e., inventory volume/turnover) and future spot prices. Furthermore, we find that, with some restrictions, the convenience yield is an applicable indicator of a commodity's supply risk.     

Pro-Poor local economic development in South Africa: The role of pro-poor tourism

This paper describes features of the emerging nexus in South Africa between tourism, poverty alleviation and local economic development (LED) interventions. The South African experience of evolving a strong pro-poor focus in LED planning is distinctive in the international context of writings on LED. Pro-poor LED is increasingly the outcome of the application of measures and programmes that are linked to the approach of pro-poor tourism in both rural and urban areas of South Africa. Two studies are presented of Alexandra township, Johannesburg and the Madikwe Game Reserve in North West Province as examples of pro-poor tourism as a form of pro-poor LED. It is argued that the growth of pro-poor tourism initiatives in South Africa suggests that the country is currently a laboratory for the testing and evolution of new approaches towards the planning of LED that potentially will have relevance for other countries in the developing world.     

Effects of new technologies with special regard for the implementation process per se

The aim of this study was to investigate the effects of the implementation process to new technologies [e.g. drawing board/computer-aided design (CAD), microfiche/electronic data processing] on the employees concerned. Since the emphasis of the study lay in the intrinsic relationship of the implementation process with stress reactions, the parameters were measured at the place of work in a longitudinal design. Employees (n = 279) in seven companies (work fields: CAD, clerical work, telephone information desk) were tested three times — two months prior to, during, and 12 months after implementation. Aspects of strain and satisfaction were taken into account at each measurement phase. A special test-instrument was designed to describe the ’style of implementation‘ (manner in which implementation took place) particular to each company. The level of strain was found to increase during the implementation process. The amount of this increase was found to correlate with the company's style of implementation as well as with the type of the individual's work activity. The highest levels were found among those employees little included in the implementation process and those whose work is described as monotonous.     

Population structure of an exploited benthic cnidarian: the case study of red coral (Corallium rubrum L.)

Octocorals are an important part of many ecosystems as they add three-dimensional complexity to the benthos and thereby increase biodiversity. The Mediterranean red coral (Corallium rubrum, L. 1758) is a longevous octocoral that is harvested commercially, yet natural and anthropogenic influences on its population size structure are little understood. This study found that some harvested red coral populations had a significantly different size structure when compared to populations at the nearby Marine Protected Area (MPA) of Medas Islands at the Spanish Costa Brava (NW Mediterranean). Eighty-nine percent of the red corals in the harvested Costa Brava area are less than 10 years old and 96% of all colonies have not yet grown more than second-order branches. The size/age distribution of the harvested population is notably skewed towards younger and smaller colonies. Thus, although red coral is still abundant, its population structure is strongly distorted by harvesting. The results confirm that MPAs are useful to distinguish between anthropogenic and natural influences on population structure. However, 14 years of protection appears to be an insufficient recovery time for a longevous octocoral population such as red coral.     

可持续是每个人的职责

在发达和发展中国家找到改善生活水平及预期增长的一个可持续发展道路的压力正在增加.达到可持续需要有关生产和清楚行为的根本改变.发现使用低能耗和原材料(产生较少的废弃物)提供较好能力的方法能够有助于世界范围生活水平的改善.特别是在过去十年中,许多企业家对于可持续采取了更加负责的态度,例如在经济效益、与利益相关者的社会对话和共同的社会责任领域.公司正在认识到他们必须与广大的合作伙伴和利益相关者合作,在市场中变得更可持续和成功.     

Dibenzo-p-dioxins in the environment from ceramics and pottery produced from ball clay mined in the United States

Processed ball clay samples used in the production of ceramics and samples of the ceramic products were collected and analyzed for the presence and concentration of the 2,3,7,8-Cl substituted polychlorinated dibenzo-p-dioxins and -furans (PCDDs/PCDFs). The processed ball clay had average PCDD concentrations of 3.2 ng/g toxic equivalents, a congener profile, and isomer distribution consistent with those found previously in raw ball clay. The PCDF concentrations were below the average limit of detection (LOD) of 0.5 pg/g. The final fired ceramic products were found to be free of PCDDs/PCDFs at the LODs. A consideration of the conditions involved in the firing process suggests that the PCDDs, if not destroyed, may be released to the atmosphere and could represent an as yet unidentified source of dioxins to the environment. In addition, the PCDDs in clay dust generated during manufacturing operations may represent a potential occupational exposure.     

Beyond the medicine cabinet: an analysis of where and why medications accumulate

Active pharmaceutical ingredients (APIs) from medications can enter the environment as trace contaminants, at individual concentrations generally below a part per billion (microg/L). APIs enter the environment primarily via the discharge of raw and treated sewage. Residues of unmetabolized APIs from parenteral and enteral drugs are excreted in feces and urine, and topically applied medications are washed from skin during bathing. These trace residues may pose risks for aquatic life and cause concern with regard to subsequent human exposure. APIs also enter the environment from the disposal of unwanted medications directly to sewers and trash. The relative significance of this route compared with excretion and bathing is poorly understood and has been subject to much speculation. Two major aspects of uncertainty exist: the percentage of any particular API in the environment originating from disposal is unknown, and disposal undoubtedly occurs from a variety of dispersed sources. Sources of disposal, along with the types and quantities of APIs resulting from each source, are important to understand so that effective pollution prevention approaches can be designed and implemented. Accumulation of leftover, unwanted drugs poses three major concerns: (i) APIs disposed to sewage or trash compose a diverse source of potential chemical stressors in the environment. (ii) Accumulated drugs represent increased potential for drug diversion, with its attendant risks of unintentional poisonings and abuse. (iii) Leftover drugs represent wasted healthcare resources and lost opportunities for medical treatment. This paper has four major purposes: (1) Define the processes, actions, and behaviors that control and drive the consumption, accumulation, and need for disposal of pharmaceuticals. (2) Provide an overview of the diverse locations where drugs are used and accumulate. (3) Present a summary of the first cataloging of APIs disposed by a defined subpopulation. (4) Identify opportunities for pollution prevention and source reduction.