微生物制剂与玄武岩纤维联斥处理城市废水

为了探索一种新型的去除水体中有机物的工艺,以模拟城市废水为研究对象,研究不同工况条件下,复合微生物制剂、组合双环玄武岩纤维填料以及复合微生物制剂与组合双环玄武岩纤维填料结合对模拟城市废水中COD的去除情况。实验结果表明,复合微生物制剂与组合双环玄武岩纤维填料结合在曝气的情况下对COD的去除能力较高。在复合微生物制剂与组合双环玄武岩纤维填料结合的条件下,对COD浓度为500mg／L左右的模拟城市废水的去除效率可达97．22％;影响模拟城市废水中COD去除效果的各因素的主次顺序依次为反应时间〉曝气时间〉投加量=pH;得出最佳工况参数是：复合微生物制剂的投加量为0．05g／L,曝气时间为72h,反应时间为96h,pH为7。     

An economic evaluation and assessment of environmental impact of the municipal solid waste management system for Taichung City in Taiwan

Municipal solid waste management (MSWM) is an important environmental challenge and subject in urban planning. For sustainable MSWM strategies, the critical management factors to be considered include not only economic efficiency of MSW treatment but also life-cycle assessment of the environmental impact. This paper employed linear programming technique to establish optimal MSWM strategies considering economic efficiency and the air pollutant emissions during the life cycle of a MSWM system, and investigated the correlations between the economical optimization and pollutant emissions. A case study based on real-world MSW operating parameters in Taichung City is also presented. The results showed that the costs, benefits, streams of MSW, and throughputs of incinerators and landfills will be affected if pollution emission reductions are implemented in the MSWM strategies. In addition, the quantity of particulate matter is the best pollutant indicator for the MSWM system performance of emission reduction. In particular, this model will assist the decision maker in drawing up a friendly MSWM strategy for Taichung City in Taiwan.

Implications: Recently, life-cycle assessments of municipal solid waste management (MSWM) strategies have been given more considerations. However, what seems to be lacking is the consideration of economic factors and environmental impacts simultaneously. This work analyzed real-world data to establish optimal MSWM strategies considering economic efficiency and the air pollutant emissions during the life cycle of the MSWM system. The results indicated that the consideration of environmental impacts will affect the costs, benefits, streams of MSW, and throughputs of incinerators and landfills. This work is relevant to public discussion and may establish useful guidelines for the MSWM policies.     

A teratological assessment of four trihalomethanes in the rat

Abstract

Four trihalomethanes were administered by gavage to Sprague‐Dawley rats from day 6 to day 15 of gestation. Chloroform (Ch) was administered at levels of 100, 200 and 400 mg/kg and bromoform (Br), bromodichloromethane (BDCM) and chlorodibromomethane (CDBM) were administered at levels of 50, 100 or 200 mg/kg/day. A separate control was used for each compound. Maternal weight gain was depressed in all groups receiving Ch and at the highest dose levels of BDCM and CDBM. Ch administration caused decreased maternal hemoglobin and hematocrit values at all dose levels and also produced increased serum inorganic phosphorus and cholesterol at the highest dose. Liver enlagement was observed at all dose levels of Ch but in no other treatment groups. Evidence of a fetotoxic response was observed with Ch, CDBM and Br but not BDCM. No dose‐related histopathological changes were observed in either mothers or fetuses as a result of treatment. None of the chemicals tested produced any teratogenic effects.     

复合光催化材料Ag-AgCl/石墨烯的制备及性能

以原位化学沉淀;光还原法制备了Ag-AgCl/石墨烯复合光催化材料。以罗丹明B为模型降解物,研究了其可见光催化性能。实验结果表明：石墨烯的引入使Ag-AgCl/石墨烯催化剂催化活性提高;当初始罗丹明B质量浓度为5 mg/L时,可见光照射60 min后罗丹明B的降解率可达99%;降解率随初始罗丹明B质量浓度的增加而减小。Ag-AgCl/石墨烯具有很高的可见光催化活性和稳定性。     

阳极氧化联合电-Fenton氧化深度处理垃圾渗滤液

采用多孔碳素阴极、Ti/SnO2-Sb2O5-IrO2阳极构建电化学氧化系统用于渗滤液的深度处理。研究结果表明,所构建的电化学氧化系统通过阳极氧化和电-Fenton氧化2种机制降解有机污染物;处理过程中阴极表面形成的沉淀物对TOC和COD的衰减也产生了影响。在阴极电位为-1.0 V、Fe2+初始浓度为0.5 mmol/L的条件下,电化学处理120 min获得了58%的TOC去除;处理480 min COD去除率为55%,NH3-N去除率为99%,TN去除率为60%,色度几乎被完全去除。GC-MS分析结果表明,渗滤液中以腐殖质类物质为主的有机化合物被降解为分子量相对较小的有机物,直至完全矿化。联合阳极氧化和电-Fenton氧化机制的电化学处理方法为垃圾渗滤液深度处理提供了新的选择。     

Fine particulate speciation profile and emission factor of municipal solid waste incinerator established by dilution sampling method

In this study, fine particulate matter (PM_2.5) emitted from a municipal solid waste incinerator (MSWI) was collected using dilution sampling method. Chemical compositions of the collected PM_2.5 samples, including carbon content, metal elements, and water-soluble ions, were analyzed. Traditional in-stack hot sampling was simultaneously conducted to compare the influences of dilution on PM_2.5 emissions and the characteristics of the bonded chemical species. The results, established by a dilution sampling method, show that PM_2.5 and total particulate matter (TPM) emission factors were 61.6 ± 4.52 and 66.1 ± 5.27 g ton-waste^?1, respectively. The average ratio of PM_2.5/TPM is 0.93, indicating that more than 90% of PM emission from the MSWI was fine particulate. The major chemical species in PM_2.5 included organic carbon (OC), Cl^?, NH₄⁺, elemental carbon (EC) and Si, which account for 69.7% of PM_2.5 mass. OC was from the unburned carbon in the exhaust, which adsorbed onto the particulate during the cooling process. High Cl^? emission is primarily attributable to wastes containing plastic bags made of polyvinyl chloride, salt in kitchen refuse and waste biomass, and so on. Minor species that account for 0.01–1% of PM_2.5 mass included SO₄^2-, K⁺, Na, K, NO₃^?, Al, Ca²⁺, Zn, Ca, Cu, Fe, Pb, and Mg. The mean ratio of dilution method/in-stack hot method was 0.454. The contents of water-soluble ions (Cl^?, SO₄^2-, NO₃^?) were significantly enriched in PM_2.5 via gas-to-particle conversion in the dilution process. Results indicate that in-stack hot sampling would underestimate levels of these species in PM_2.5.

Implications: PM_2.5 samples from a municipal solid waste incinerator (MSWI) were collected simultaneously by a dilution sampling technique and a traditional in-stack method. PM_2.5 emission factors and chemical speciation profiles were established. Dilution sampling provides more reliable data than in-stack hot sampling. The results can be applied to estimate the PM_2.5 emission inventories of MSWI, and the source profile can be used for contribution estimate of chemical mass balance modeling.     

硫酸法制二氧化钛生产中废酸浓缩技术的述评

介绍和评价了国内外硫酸法制二氧化钛生产中废酸的浓缩技术,从工艺、设备及材质3方面分析了国内在二氧化钛废酸处理中存在的问题,指出最有效的解决措施是：以防为主,改善工艺条件;使硫完全参与反应,减少硫的损失和对环境的破坏;完善配套设施,提高设备质量;综合考虑废酸、新酸和钛铁矿的物料配比;选择耐腐蚀性较好的复合材料作为设备材质;最终使废酸少产生或无产生。     

Decomposition of NO in automobile exhaust by plasma–photocatalysis synergy

The combination of plasma discharge and TiO₂ photocatalysis exhibits high performances in the removal of nitrogen monoxide (NO). This article is aimed at elucidating the relationships between NO decomposition efficiency and various experimental parameters, including voltages, humidity and temperature. The experimental results indicate that the efficiency of NO removal by synergic plasma-catalyst coupling is significantly higher than plasma only or photocatalyst only systems. Moreover, the NO removal efficiency improves with the increase of applied voltage. Meanwhile, a higher humidity results in a reduced number of electron–hole pairs at the surface of TiO₂ photocatalyst, leading to lower synergic purification efficiencies. Finally, the efficiency of NO removal is raised with the increase of temperature due to the fact that the adsorption of NO and water by nano-TiO₂ is affected by environmental temperature.     

椰纤维生物炭对Cd(Ⅱ)、As(Ⅲ)、Cr(Ⅲ)和Cr(Ⅵ)的吸附

为了研究不同裂解温度制备的椰衣生物炭对Cd(Ⅱ)、As(Ⅲ)、Cr(Ⅲ)和Cr(Ⅵ)的吸附性能差异及其机理,并为制备高效吸附生物炭提供依据,采用Langmuir和Freundlich模型拟合分析了300、500和700℃3个裂解温度下制备的椰衣生物炭对Cd(Ⅱ)、As(Ⅲ)、Cr(Ⅲ)和Cr(Ⅵ)的等温吸附曲线,使用元素分析仪、Boehm滴定法、扫描电子显微镜等研究了不同温度制备的生物炭的组成与理化性质。结果表明,Langmuir模型和Freundlich模型都能较好地拟合生物炭对这些重金属的吸附,提高生物炭的制备温度可增加其对Cd(Ⅱ)和Cr(Ⅲ)的最大吸附量,同时降低其对As(Ⅲ)和Cr(Ⅵ)的最大吸附量;制炭温度升高引起的生物炭C含量、灰分含量、p H、CEC的升高和生物炭表面积增大是导致其对Cd(Ⅱ)和Cr(Ⅲ)的最大吸附量增大的主要原因。而随着制炭温度的上升,O、H元素含量下降引起的碱性官能团的增加,和羟基和酚羟基官能团的减少是生物炭对As(Ⅲ)和Cr(Ⅵ)吸附量下降的主要因素。     

长江旅游带旅游资源空间格局研究

旅游资源的空间格局是旅游产业规划、布局的重要基础。本文选择长江旅游带9省2市世界遗产地、国家级自然保护区、5A旅游景区、全国重点文物保护单位等12类共计4 729处旅游资源单体的空间分布数据,借助Arc GIS软件,运用空间自相关分析和核密度估计法对旅游资源空间格局进行了分析。结果表明,长江旅游带总体旅游资源、自然旅游资源和人文旅游资源在空间上均具有明显的聚类特征。总体旅游资源沿北纬30°线、G318国道以及沪昆、沪汉蓉高铁等交通主干线分布趋势明显;高级别旅游资源主要集中在长江三角洲地区;自然旅游资源主要集中在沪汉蓉及沪昆高铁沿线及其中间地带;人文旅游资源主要集聚在长江以南的长江三角洲、古徽州地区、滇西北地区以及黔东南少数民族地区。依据得出的旅游资源空间格局特征和分布规律,建议依托长江水道、G318国道和沿线高铁,打造东西向快速旅游通道和精品旅游线路;依托政策优势,联合多方组织机构形成跨区域旅游合作共同体。