Degradation pathways of PCBs upon UV irradiation in hexane.

The photodegradations of eight individual PCB congeners (5, 31, 52, 77, 87, 126, 138, 169) in hexane have been investigated employing a mercury lamp. All degradation reactions of the above mentioned PCB congeners are of the pseudo first order. The principal products of PCB decomposition are the less chlorinated biphenyls, and no PCB-solvent adducts are found. Symmetrical and coplanar PCB congeners show lower photoreactivities. The reactivities of the chlorine atoms at various positions of PCB rings are generally in the order: ortho > meta > para. Photodechlorinations occur mainly on the more substituted rings, when the numbers of chlorine atoms on the two phenyl rings are unequal. During photodegradation, some coplanar PCB congeners are formed, which make the TEQ of solutions to decrease slowly or even to increase.     

Cu/Cr co-stabilization mechanisms in a simulated Al2O3-Fe2O3-Cr2O3-CuO waste system

• Cu and Cr can be mostly incorporated into CuFe_xAl_yCr_2−x−yO₄ with a spinel structure. • Spinel phase is the most crucial structure for Cu and Cr co-stabilization. • Compared to Al, Fe and Cr are easier to be incorporated into the spinel structure. • ‘Waste-to-resource’ by thermal process at attainable temperatures can be achieved. Chromium slag usually contains various heavy metals, making its safe treatment difficult. Glass-ceramic sintering has been applied to resolve this issue and emerged as an effective method for metal immobilization by incorporating heavy metals into stable crystal structures. Currently, there is limited knowledge about the reaction pathways adopted by multiple heavy metals and the co-stabilization functions of the crystal structure. To study the Cu/Cr co-stabilization mechanisms during thermal treatment, a simulated system was prepared using a mixture with a molar ratio of Al₂O₃:Fe₂O₃:Cr₂O₃:CuO= 1:1:1:3. The samples were sintered at temperatures 600–1300°C followed by intensive analysis of phase constitutions and microstructure development. A spinel phase (CuFe_xAl_yCr_2−x−yO₄) started to generate at 700°C and the incorporation of Cu/Cr into the spinel largely complete at 900°C, although the spinel peak intensity continued increasing slightly at temperatures above 900°C. Fe₂O₃/Cr₂O₃ was more easily incorporated into the spinel at lower temperatures, while more Al₂O₃ was gradually incorporated into the spinel at higher temperatures. Additionally, sintered sample microstructures became more condensed and smoother with increased sintering temperature. Cu / Cr leachability substantially decreased after Cu/Cr incorporation into the spinel phase at elevated temperatures. At 600°C, the leached ratios for Cu and Cr were 6.28% and 0.65%, respectively. When sintering temperature was increased to 1300°C, the leached ratios for all metal components in the system were below 0.2%. This study proposes a sustainable method for managing Cu/Cr co-exist slag at reasonable temperatures.     

A two-dimensional inviscid model of the gravity-current head by Lagrangian block simulation

A two-dimensional inviscid model of the gravity-current head produced by the release of a relatively small volume of dense fluid from behind a tall lock gate is constructed by Lagrangian block simulation. Three numerical experiments are conducted for the lock’s height-to-length aspect ratios H/L _o  = 8, 4 and 2. The front speeds obtained by the simulations agree with the laboratory observation for a similar range of aspect ratios. The floor velocity in the wake behind these heads is found to be greater than their front speed. The high floor velocity is caused by the impingement of the coherent wake vortex on the floor. It is a condition that permits these gravity-current heads to maintain their structural integrity so that the fine sediments can travel with the head over long distances on the ocean floor. The structural coherence of the current head depends on the lock aspect ratio. The gravity-current head produced by the release from the lock with the highest aspect ratio of H/L _o  = 8 is most coherent and relatively has the greatest floor velocity and the least trailing current behind the head.     

进口废塑料环境保护管理研究

随着塑料资源的大量消耗,废塑料的利用引起了社会的高度重视。工艺简单,投入成本少,入行门槛低导致部分废塑料加工利用企业技术水平低、管理模式差、环境污染重。为规范进口废塑料行业,通过调研统计、实验分析、咨询论证和研究了进口废塑料环境保护管理规定,对进口废塑料企业的规模、设备、人员和管理等方面提出了要求,为进一步规范提升进口废塑料行业提供技术支撑。     

UV光解技术在采油（气）田脱水废气处理中的应用

采用UV高效光解净化设备,对采油（气）田TEG脱水工艺产生的废气深度净化、脱臭,其净化效率达99%;同时克服了废气成分复杂、浓度高、含水率高、环境温差大、防爆要求高等废气净化方法的限制性难题,并能广泛适用于多种行业的废气净化。     

Assessment of some water quality parameters in the Red River downstream,Vietnam by combining field monitoring and remote sensing method

Environmental Science and Pollution Research - The Red River is the largest river in northern Vietnam, and it serves as the main water source for production and human activities in the Red River...     

Research on the evolution characteristics of future climate change in West Liao River Basin

Environmental Science and Pollution Research - In order to explore the characteristics of climate change in the future in the West Liao River Basin under the background of future climate change,...     

The modelling of trichloroethene photodegradation in Brij 35 surfactant by two-stage reaction.

Various clean-up technologies have been developed for the removal and/or destruction of trichloroethene (TCE) in the subsurface. Surfactant-aided soil washing followed by photodegradation could be a promising approach to such a task. The modelling of TCE photodegradation by UV in Brij 35 surfactant micelles is therefore investigated. Two stages of TCE degradation are observed in surfactant Brij 35 systems. A lag phase is observed at the commencement of the degradation, but the duration of the lag phase is significantly reduced as the initial pH increases. As the overall decay of TCE is also found to be faster at higher pH levels, it is suggested that the free radical reaction is dominant at high pH levels, and the formation of lag phases is mainly due to the deficiency of free radicals at lower pH levels. Since the period of the lag phase gradually decreases with the increase of initial pH level, and the two pseudo first-order reaction constants (one for the lag phase and one for the subsequent fast decay) for TCE decay in both stages are also pH dependent, a non-steady-state mathematical model is developed for the prediction of TCE photodegradation in Brij 35 solutions, in which the remaining fraction of TCE (C/C0) in the system can be determined at any instant by using a simple parameter of the initial system pH.     

我国粮食安全保障中改善农业环境的途径

本文分析了我国粮食安全及粮食持续生产所依托的农业环境状况。从我国粮食生产状况与经济发展水平看,全国粮食生产处于结构性过剩与低水平安全中,区域性粮食安全与不安全并存;耕地资源、水资源以及农民的经济收入状况等均不容乐观,加之自然灾害加重,粮食生产的环境成本将随之增加,这将影响我国未来粮食安全。为此,本文提出了走农业集约化道路是解决我国粮食安全与改善环境的基本途径。     

金属铁离子对农田土壤氮转化影响分析

以长春伊通河河谷阶地上部的农田土为研究对象,选用铁离子作为氮转化的一种影响因素,定性研究了不同浓度的铁离子对硝态氮、亚硝态氮、铵态氮三氮的变化影响。并且在建立方程组之后计算平衡常数,证明了铁的氧化作用,与实验所得相符合：铁促进铵态氮的吸附、促进硝化反应的进行。从实验和理论的角度说明了铁在三氮转化中起的作用,为进一步研究锰铁离子对氮转化的定量影响和氮素污染地下水的预测和定量评价提供科学依据。