Revised relative potency values for PCDDs, PCDFs, and non-ortho-substituted PCBs for the optimized H4IIE-luc in vitro bioassay

While the World Health Organization 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) equivalency factors are useful estimates of relative potencies of mixtures when conducting risk assessments, they are not useful when comparing the results of bioassays such as the H4IIE-luc to concentrations of TCDD equivalents calculated from instrumental analyses. Since there are thousands of dioxin-like compounds (DLCs), one use of screening assays is to determine if all of the aryl hydrocarbon receptor (AhR) active DLCs in a mixture have been accounted for in instrumental analyses. For this purpose, bioassay-specific relative potency (ReP) values are needed. RePs of 21 polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and dioxin-like polychlorinated biphenyls that exhibit effects mediated through the AhR were determined by use of the H4IIE-luc assay. Different values of RePs are derived, depending on the statistical, curve-fitting methods used to derive them from the dose–response relationships. Here, we discuss the various methods for deriving RePs from in vitro data and their assumptions and effects on values of RePs. Full dose–response curves of 2,3,7,8-TCDD and other representative DLCs were used to estimate effective concentrations at multiple points (e.g., EC20-50-80), which were then used to estimate ReP of each DLC to 2,3,7,8-TCDD.     

The use of failure mode and effects analysis to construct an effective disposal and prevention mechanism for infectious hospital waste

In recent times, the quality of medical care has been continuously improving in medical institutions wherein patient-centred care has been emphasized. Failure mode and effects analysis (FMEA) has also been promoted as a method of basic risk management and as part of total quality management (TQM) for improving the quality of medical care and preventing mistakes. Therefore, a study was conducted using FMEA to evaluate the potential risk causes in the process of infectious medical waste disposal, devise standard procedures concerning the waste, and propose feasible plans for facilitating the detection of exceptional cases of infectious waste. The analysis revealed the following results regarding medical institutions: (a) FMEA can be used to identify the risk factors of infectious waste disposal. (b) During the infectious waste disposal process, six items were scored over 100 in the assessment of uncontrolled risks: erroneous discarding of infectious waste by patients and their families, erroneous discarding by nursing staff, erroneous discarding by medical staff, cleaning drivers pierced by sharp articles, cleaning staff pierced by sharp articles, and unmarked output units. Therefore, the study concluded that it was necessary to (1) provide education and training about waste classification to the medical staff, patients and their families, nursing staff, and cleaning staff; (2) clarify the signs of caution; and (3) evaluate the failure mode and strengthen the effects.     

Changes in fungal population of fly ash and vinasse mixture during vermicomposting by Eudrilus eugeniae and Eisenia fetida: documentation of cellulase isozymes in vermicompost

Fly ash (FA) and vinasse (VN), two industrial wastes, are generated in huge amounts and cause serious hazards to the environment. In this experiment, different proportions of these two wastes were used as food for two epigeic earthworms (Eisenia fetida and Eudrilus eugeniae) to standardize the recycling technique of these two wastes and to study their effect on fungal especially cellulolytic fungal population, cellulase activity and their isozyme pattern, chitin content and microbial biomass of waste mixture during vermicomposting. Increasing VN proportion from 25% to 50% or even higher, counts of both fungi and cellulolytic fungi in waste mixtures were significantly (P ? 0.05) increased during vermicomposting. Higher cellulase activity in treatments having 50% or more vinasse might be attributed to the significantly (P ? 0.05) higher concentration of group I isozyme while concentrations of other isozymes (group II and III) of cellulase were statistically at par. Higher chitin content in vinasse-enriched treatments suggested that fungal biomass and fungi-to-microbial biomass ratio in these treatments were also increased due to vermicomposting. Results revealed that Eudrilus eugeniae and Eisenia fetida had comparable effect on FA and VN mixture during vermicomposting. Periodical analysis of above-mentioned biochemical and microbial properties and nutrient content of final vermicompost samples indicated that equal proportion (1:1, w/w) of FA and VN is probably the optimum composition to obtain best quality vermicompost.     

Dietary exposure to DDT of secondary school students in Hong Kong

The aim of this study was to determine the dietary exposure of DDT in foodstuffs consumed in Hong Kong by secondary school students in Hong Kong in 2005. Food samples of domestic or imported food were collected randomly from local markets for the determination of DDT. The analytical method for this survey was based on isotope dilution technique. DDT isomers were determined at parts per billion (mugkg(-1)) levels in foods by pressured fluid extraction followed by gel permeation column cleanup and gas chromatography with mass spectrometry detection. Among the 98 composite samples, 25 were found positive with DDT levels greater than the limit of quantitation (LOQ) (1mugkg(-1) for each isomer of DDT). Only two of the meat products were found to contain low levels of the metabolites of DDT. A number of fish and shellfish were found to contain not just the metabolites of DDT, but also parent DDT. The main contribution to DDT was from seafood. The dietary intake of DDT for an average and high secondary school student consumers were estimated to be 0.145 and 0.291mugkg(-1)bwd(-1), respectively. Both levels fell well below the Provisional Tolerable Daily Intake (PTDI) of 10mugkg(-1)bwd(-1) established by the Joint Food Agriculture Organization/World Health Organization Meeting on Pesticide Residues (JMPR). It was concluded that both the average and high secondary school student consumers were unlikely to experience major toxicological effects of DDT.     

Destruction of EDTA using Ce(IV) mediated electrochemical oxidation: a simple modeling study and experimental verification

Mediated electrochemical oxidation (MEO) is a recent development in the environmental research field for the complete destruction of organic pollutants. This study presents the destruction of EDTA by cerium(IV) MEO process in nitric acid medium. The destruction reaction was carried out in a continuous stirred tank reactor under various conditions. A simple kinetic model was developed to analyze and simulate the organic destruction in the MEO process. The model was based on the calculation of the total mass balance, the component mass balance, and the energy balance in the reactor and also in the heating jacket. The sensitivity to key operating conditions such as the initial EDTA concentration (50-200 mM), EDTA feeding time (30-180 min), reaction temperature (323-363 K), and the rate laws corresponding to zero-, first-, second-, and third-order reaction were analyzed. It was found that the model simulated agreed well with the experimental data for EDTA oxidation. The results obtained showed the suitability of the MEO process for the effective mineralization of high concentrations of EDTA.     

Potential source of asbestos in non-asbestos textile manufacturing company

Recently, a worker with lung carcinoma and a metastatic brain tumor was diagnosed as having a work-related disease. He had been employed in a non-asbestos textile company for 25 years. Consequently, to identify and explore possible causative agents for lung cancer in a non-asbestos textile manufacturing company and establish a causal relationship between exposure and lung cancer, an epidemiological investigative study was conducted and the work processes the worker was engaged in were examined. Air samples were taken from the workplace and during the drilling processes, and a suspected causative material was analyzed. The study revealed that the subject had been employed in the non-asbestos textile manufacturing company for 25 years from 1973 and his responsibilities included repairing spinning machines. In particular, the subject was involved in drilling B-bushings that were used to protect against gear abrasion in the spinning machines. An analysis of the B-bushings using a transmission electron microscope equipped with an energy dispersive X-ray analyzer indicated that they contained crocidolite asbestos fibers. Air samples obtained when drilling the B-bushings clearly indicated that the subject had most likely been exposed to crocidolite fibers when installing the B-bushings in the spinning machines. The frequency and duration of the work suggested that there would be a sufficient degree of exposure to crocidolite fibers to cause lung cancer. Except for smoking and asbestos exposure, no other chemical exposure was suspected for developing lung cancer in the workplace. Smoking appeared to be more of a potentiating risk factor in conjunction with the asbestos exposure. Accordingly, this case may provide significant evidence in identifying the cause of the mesothelioma or lung carcinoma found among workers in non-asbestos textile manufacturing companies elsewhere.     

Application of an aerosol electrical mobility spectrum analyzer: Charged-particle polarity ratio measurement in the Antarctic and Arctic regions

An aerosol electrical mobility spectrum analyzer (AEMSA), developed at Hanyang University, was employed to investigate the particle charge characteristics in the Antarctic and Arctic regions. The particle charge characteristics in these areas were compared with the charging state in Ansan, South Korea, located in the midlatitude, where artificial factors, such as human activity, urbanization, and traffic, might result in a higher total concentration. Furthermore, in Ansan, South Korea, the charged-particle polarity ratio was very stable and was close to 1. However, notably different particle charge characteristics were obtained in the Antarctic and Arctic regions. The imbalance between the numbers of positively and negatively charged particles was evident, resulting in more positive charges on the atmospheric particles. On average, the positively charged particle concentrations in the Antarctic and Arctic areas were 1.4 and 2.8 times higher, respectively, compared with the negatively charged particles. The developed AEMSA system and the findings of this study provide useful information on the characteristics of atmospheric aerosols in the Antarctic and Arctic regions and can be further utilized to study particle formation mechanisms.     

EVALUATION OF THE SUSTAINABILITY OF WATER WITHDRAWALS IN THE UNITED STATES, 1995 TO 20251

To evaluate the long term sustainability of water withdrawals in the United States, a county level analysis of the availability of renewable water resources was conducted, and the magnitudes of human withdrawals from surface water and ground water sources and the stored water requirements during the warmest months of the year were evaluated. Estimates of growth in population and electricity generation were then used to estimate the change in withdrawals assuming that the rates of water use either remain at their current levels (the business as usual scenario) or that they exhibit improvements in efficiency at the same rate as observed over 1975 to 1995 (the improved efficiency scenario). The estimates show several areas, notably the Southwest and major metropolitan areas throughout the United States, as being likely to have significant new storage requirements with the business‐as‐usual scenario, under the condition of average water availability. These new requirements could be substantially eliminated under the improved efficiency scenario, thus indicating the importance of water use efficiency in meeting future requirements. The national assessment identified regions of potential water sustainability concern; these regions can be the subject of more targeted data collection and analyses in the future.     

Characterization of dissolved organic carbon and Humic substances in the well water of the Blackfoot disease area in Taiwan

Since the early 1960s, many investigators have reported that blackfoot disease, a peripheral vascular disease, observed in southwestern Taiwan is due to drinking the higher arsenic concentration in well water. However, recent studies indicated that the relationship with blackfoot disease is not only with arsenic but also humic substances. This paper presents some results concerning the characterization (such as fluorescence, elemental composition, molecular weight and carbon distribution) of humic substances isolated from the Fuhsing well water of the blackfoot disease area. For comparison, the dissolved organic carbon (DOC) and humic substances in the normal well water from Chiuying and the Nanwan coastal water were also analyzed. In general, in the well water of the blackfoot disease area, extremely high concentrations of DOC (18.5mg/L) and fulvic acid (7.54mg/L) with high fluorescence intensity (59.1, equivalent to 0.0282uM quinine sulfate solution) and high percentages (over 50%) of low molecular weights of less than 1,000 were obtained compared with those of normal waters. C‐13 Nuclear magnetic resonance spectroscopy showed a high content (37.2%) of aromatic carbon. These higher concentrations of DOC and fulvic acid with the higher content of aromatic carbon in well water might be one of the key factors causing the blackfoot disease in Taiwan.     

Relationship between road traffic noisescape and urban form in Hong Kong

This paper reports on a study which explored the possible relationship between road traffic noisescape and urban form in Hong Kong. A total of 212 residential complexes from 11 contrasting urban forms were sampled, and their noise levels assessed both at dwelling and neighbourhood scales by noise mapping. Its findings indicate that residential complexes with different urban forms have significantly different noisescape attributes. There is a strong correlation between the noise characteristics and morphological indicators at the dwelling scale. A less obstreperous noisescape is associated with urban forms with lower road and building densities, and with building arrangements which provide self-noise screening. These findings suggest that urban form is an influential determinant of the noisescape in the urban environment, and they point to the need to rethink the conventional approach to managing the urban acoustic environment.