Analysis of heavy metal distribution in superficial estuarine sediments (estuary of Bilbao, Basque Country) by open-focused microwave-assisted extraction and ICP-OES

Open-focused microwave-assisted extraction and ICP-OES determination of As, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn from surface sediments of the estuary of Bilbao (Basque Country, North of Spain) was carried out. All the samples were collected at three different tributaries of the estuary (Asua, Galindo and Nerbioi-Ibaizabal) every two months during 1999. The digestion procedure was proposed from the conclusions of a fractionated factorial design, and the precision and accuracy of the method was verified using a certified reference sediment (RTC008-050). The results of the analysis were statistically treated by means of principal component analysis and correlation analysis. The principal component analysis of sediment data (32 samples × 9 metals) indicated different patterns of contamination regarding the tributary and sampling station. The two main patterns observed were a steady increment of the metal concentration along all the campaigns in the samples collected in the Galindo River and a seasonal variation in the Nerbioi-Ibaizabal River, with higher metallic content during summertime and lower content during wintertime.     

Enhancing bioremediation of diesel oil and gasoline in soil amended with an agroindustry sludge

This paper presents a study of the bioremediation of diesel oil and gasoline by a series of controlled laboratory tests. Sludge from an agroindustry was used to enhance bioremediation of both gasoline and diesel oil mixed with a soil mass to compare its efficiency with that of a mineral fertilizer. Effects of soil microbiology and soil mixtures were investigated by means of evolution of CO2, microorganism populations at 90 days, pH at 65 and 95 days, mineral nitrogen, and gas chromatographic analysis of the benzene, toluene, methyl tertiary butyl ether, C8, and C9+total aromatics at the end of the experiments. Treatments containing sludge showed better soil conditions after 170 days of treatment (inorganic nitrogen and microbiota activity) compared with gasoline and diesel oil without amendments. Samples had no detectable traces of the measured hydrocarbons at 170 days of treatment.     

Influence of air pollution on the incidence of respiratory tract neoplasm

To evaluate the possible influence of air pollutants on the incidence of respiratory tract neoplasm we studied 12 S?o Paulo City districts where air pollution is observed. We collected data on pollutants from 1981-1990 and correlated it with the incidence of larynx and lung neoplasms in 1997. Ozone was the pollutant that best correlated with the incidence of neoplasm. The correlation coefficients were 0.7234 (p=0.277) and 0.9929 (p=0.007) for lung and larynx cancer, respectively. There may be a relationship between air pollution and the incidence of respiratory tract neoplasm. This study, however, does not allow us to conclude that there is a causal relationship.     

Development of processes for environmental protection based on self-propagating reactions

The possibility of exploiting self-propagating reactions for environmental protection is discussed in this paper. In particular, results obtained at the laboratory scale and related to the fixation and consolidation of high level radioactive wastes, the recycling of silicon sludge and aluminum dross produced by semiconductor industries and aluminum foundries, the treating and recycling of a highly toxic solid waste from electrolytic zinc plants, and the degradation of chlorinated aromatics, are examined with particular emphasis on the latter case. Specifically, the self-propagating destruction of hexachlorobenzene and 2-(2-4-dichlorophenoxy)-propanoic acid with calcium hydride as reductive substrate is demonstrated. In fact, the heat liberated by the reactions involved is large enough to guarantee the self-sustaining character of the process within a wide range of reactants compositions. Moreover, no residual chlorinated organic compounds were found in the final solid product. Some reactor engineering aspects, as well as other significant future scientific and technological issues, are also addressed in view of large-scale applicability of processes based on self-propagating reactions. To date, the batch reactor technology seems to be more easily applicable, although the use of continuous reactors is not excluded in the next future.     

Disclosure of climate risk information by the world’s largest companies

The risks related to global climate change are seen as threats to companies, taking into consideration their impact on the return on investment. In order to mitigate climate risk and introduce new opportunities to financiers, companies need to identify, manage, and report climate risks. The purpose of this paper is to investigate the climate risks disclosed by the 100 largest companies in the world, according to the Bloomberg and Price Waterhouse Coopers (PwC 2015) classification, and identify some characteristics of these companies that explain the disclosure level of such information. Preliminary results revealed that of the companies investigated, 14% did not disclose any climate risk information in the Carbon Disclosure Program (CDP) report. Also, from the companies that disclosed information according to the Global Reporting Initiative (GRI), 9.9% did not provide information regarding policies, actions, and strategies for mitigating the risks related to climate change. The results shown by the content analysis suggested that, in general, there is still a low level of disclosure about climate risks by these companies. The final results through econometric instruments and statistical tests indicate that the size of the company or the fact that corporations are from developed countries do not necessarily explain the level of information disclosed. However, the activity sector, the continent, and the efficiency of the Board of Directors are factors that strongly explain the level of climate risk disclosure. We conclude that more effort is needed to encourage an engaging attitude from corporations to develop actions, policies, and strategies to mitigate climate change risks and threats. In addition, the world’s largest companies should make a greater investment in climate risk disclosure.     

The toxicological paradigms of aluminum and the etiology of Alzheimer's disease in the nematode Caenorhabditis elegans

This study examined behavioral and enzymatic changes of C. elegans from its exposure to aluminum, and the resulting relationship with Alzheimer's disease. After chronic and acute exposure to aluminum, the results indicated that it alters the cholinergic status and behavior parameters of the nematode, suggesting a relationship between exposure to aluminum and the etiology of AD.     

Soil moisture determines the effectiveness of two urease inhibitors to decrease N<Subscript>2</Subscript>O emission

Among the mitigation strategies to prevent nitrogen (N) losses from ureic fertilizers, urease inhibitors (UIs) have been demonstrated to promote high N use efficiency by reducing ammonia (NH₃) volatilization. In the last few years, some field experiments have also shown its effectiveness in reducing nitrous oxide (N₂O) losses from fertilized soils under conditions of low soil moisture. An incubation experiment was carried out with the aim of assessing the main biotic mechanisms behind N₂O emissions once that the UIs N-(n-butyl) thiophosphoric triamid (NBPT) and phenil phosphorodiamidate (PPDA) were applied with Urea (U) under different soil moisture conditions (40, 60 and 80 % water-filled pore space, WFPS). In the same study we tried to analyze to what extent soil WFPS regulates the effect of these inhibitors on N₂O emissions. The use of PPDA in our study allowed us to compare the effect of NBPT with that of another commercially available urease inhibitor, aiming to see if the results were inhibitor-specific or not. Based on the results from this experiment, a WFPS (i.e. 60 %) was chosen for a second study (i.e. mesocosm experiment) aiming to assess the efficiency of the UIs to indirectly affect N₂O emissions through influencing the pool of soil mineral N. The N₂O emissions at 40 % WFPS were almost negligible, being significantly lower from all fertilized treatments than that produced at 60 and 80 % WFPS. When compared to U alone, NBPT+U reduced the N₂O emissions at 60 % WFPS but had no effect at 80 % WFPS. The application of PPDA significantly increased the emissions with respect to U at 80 % WFPS whereas no significant effect was found at 60 %. At 80 % WFPS, denitrification was the main source of N₂O emissions for all treatments. In the mesocosm study, the application of NBPT+U was an effective strategy to reduce N₂O emissions (75 % reduction compared to U alone), due to a lower soil ammonium (NH₄ ⁺) content induced by the inhibitor. These results suggest that adequate management of the UI NBPT could provide, under certain soil conditions, an opportunity for mitigation of N₂O emissions from fertilized soils.     

Mechanism of complexation of toxic arsenate,selenate, and molybdate with hydrotalcites

Environmental Chemistry Letters - Wastewater from the uranium mining industry contains toxic arsenate (AsO43–), selenate (SeO42–), and molybdate (MoO42–) that can be removed by...     

Estimation of chemical concentration due to fugitive emissions during chemical process design

Fugitive emissions are not an environmental concern alone, but are also a health concern. From occupational health standpoint, fugitive emissions are the main sources of origin of the continuous exposure to workers. Operating plants regularly measure release and concentration levels through a plant-monitoring program. However, for processes which are still ‘on paper’, predictive estimation methods are required. Therefore, three methods for estimating concentration of the fugitive emissions are presented for the process development and design phases of petrochemical processes. The methods estimate the fugitive emission rates and plant plot dimensions resulting to fugitive emission concentrations. The methods were developed for the type and amount of information available in three process design stages; conceptual design, preliminary process design, and detailed process design. The methods are applied on a real benzene plant; the estimated benzene concentrations are compared to the actual concentration measured at the plant. The results show that as the information mounts up during design, the concentration estimate becomes more accurate. The results indicate that the methods presented provide simple estimates of fugitive emission-based concentrations during the design stages.