PRODUCTION PROCESSES UNDER THE ICE IN LAKE ST. CLAIR: 1. IRRADIATION AND TEMPERATURE1

ABSTRACT: Data from three ice-covered stations in Lake St. Clair were collected to evaluate the effect of ice and related variables on phytoplankton production. Primary production, phytoplankton standing crop, irradiation and temperature were measured from January to April, 1973. Mean production values ranged from 0.74 mgC/m³/h at station 1 near Mitchell Bay to 3.4 mgC/m³/h in waters at stations 2 and 3 below the Thames River mouth. A similar pattern was observed in chlorophyll a concentration, the mean values ranged from 0.63 μg/1 at station 1 to 2.1 and 1.3 μg/1 at stations 2 and 3. Temperature stratification occurred at the three stations. However, the temperatures at station 1 were consistently more than a degree warmer than at the other two stations. Irradiation was low, having a mean value at the sampling depth of .075 ly/min. The data is interpreted to indicate that the ice-bound phytoplankton were adapted to the low irradiation. It is suggested that the variation observed between stations is related to the formation of a plume by the Thames River and differences in nutrient loads carried by the St. Clair and Thames Rivers.     

CONTROL OF LAKE PHOSPHORUS WITH ALUMINUM SULFATE: DOSE DETERMINATION AND APPLICATION TECHNIQUES1

ABSTRACT: Nutrient diversion does not always bring about prompt and sufficient reduction in lake phosphorus concentration due to recycling from nutrient rich sediments. Certain lakes and reservoirs may continue to experience nuisance algal blooms and require additional restorative steps. The phosphorus precipitation/inactivation technique is a procedure to remove phosphorus from the water column and to control its release from sediments in order to achieve P-limiting conditions to algal growth. Aluminum salts have been used in advanced waste water treatment to remove phosphorus and this technology was extended to lake rehabilitation. Guidelines for dose calculation and application are generally lacking, and are provided in this report. The dose determination suggested here allows maximum application of aluminum to bottom sediments and thus emphasizes long term control of phosphorus recycling. Dose can be calculated directly from the alkalinity of the water to be treated. Titration of lake water samples of Varying alkalinity allows the establishment of the relationship between residual dissolved aluminum, alkalinity, and dose which can then be employed for lake scale applications of alum to lakes and reservoirs. Application equipment and procedures are described. These depend on site characteristics and treatment objectives and include lakeside stores, a distribution pipe, and an application barge and manifold. Alum may also be used to meet other restoration objectives including the treatment of problem flows and the reduction of particulate concentrations.     

PHYSICAL PROCESSES AND EUTROPHICATION1

ABSTRACT: Biological responses to physical-chemical processes were examined in Toronto and Hamilton Harbours of Lake Ontario. Nutrient loadings to the harbors are large and are of similar magnitude, yet the trophic conditions of the harbors were considerably different. Lake oscillations were found to determine the flushing rates and environmental stability of the harbors. LOW residence times (<10 days) resulted in homogenous chemical conditions in Toronto Harbour, and prevented the establishment of large phytoplankton crops. The longer retention time of Hamilton Harbour permitted the establishment of huger phytoplankton crops. There probably exists a critical retention time where nutrient input events persist for a sufficient period of time for the algal community to adapt to and exploit the environmental conditions of nearshore areas.     

REGIONAL DETECTION OF CHANGE IN WATER QUALITY VARIABLES1

ABSTRACT: The detection of change in a hydrologic varaible, particularly water quality, is a current problem. A method is presented for testing whether there has been a shift in the mean of a hydrologic variable based on the well established bivariate normal distribution theory. In this technique, the dependent, or target, and the independent, or control, variables are formed as weighted linear combinations of the mean values at a number of locations in a selected target and control area. The weighting factors are determined based on a mathematical programming technique which minimizes the conditional coefficient of variation thereby minimizing the number of observations required to detect a change of a preselected magnitude in the mean of the target area. The result is a situation where a savings in the number of observations required to detect a change is a consequence of adding more stations: the space-time tradeoff. Two applications of the technique are presented, the first using electrical conductivity (EC) data from two sets of river basins and the second using EC data from a set of basins as the target variable and annual discharge as the control. The results indicate that a significant savings in time can be achieved by using this method.     

Work stress and the stress-buffering roles of work and family resources

This paper describes the development of the Work Environment Scale, which includes measures of perceived stressful and supportive aspects of the job milieu. This scale is used to examine stressful effects of the work environment on personal functioning and the stress-buffering value of work and family social resources among a representative community group of men and women. Work stressors had a greater impact on men, but supportive social resources provided more attenuation of such effects among men than among women. Although work stressors generally had less effect on men whose wives were employed, high stress in the women's work settings had some indirect negative consequences for their husbands. Reprint requests should be directed to the authors, Social Ecology Laboratory, Department of Psychiatry and Behavioral Sciences, Stanford University Medical School, Stanford, California 94305, U.S.A.     

SEASONAL DEMARCATION IN PENNSYLVANIA FOR HYDROLOGICAL USE1

ABSTRACT: A study of the length of the growing and dormant season in Pennsylvania by isoline interpolation from climatological data. Maps of the beginning and ending of the growing and dormant seasons, length of growing season and ratio of growing to dormant season are included.     

Review of ozone and temperature lidar validations performed within the framework of the Network for the Detection of Stratospheric Change

The use of assimilation tools for satellite validation requires true estimates of the accuracy of the reference data. Since its inception, the Network for Detection of Stratospheric Change (NDSC) has provided systematic lidar measurements of ozone and temperature at several places around the world that are well adapted for satellite validations. Regular exercises have been organised to ensure the data quality at each individual site. These exercises can be separated into three categories: large scale intercomparisons using multiple instruments, including a mobile lidar; using satellite observations as a geographic transfer standards to compare measurements at different sites; and comparative investigations of the analysis software. NDSC is a research network, so each system has its own history, design, and analysis, and has participated differently in validation campaigns. There are still some technological differences that may explain different accuracies. However, the comparison campaigns performed over the last decade have always proved to be very helpful in improving the measurements. To date, more efforts have been devoted to characterising ozone measurements than to temperature observations. The synthesis of the published works shows that the network can potentially be considered as homogeneous within +/-2% between 20-35 km for ozone and +/-1 K between 35-60 km for temperature. Outside this altitude range, larger biases are reported and more efforts are required. In the lower stratosphere, Raman channels seem to improve comparisons but such capabilities were not systematically compared. At the top of the profiles, more investigations on analysis methodologies are still probably needed. SAGE II and GOMOS appear to be excellent tools for future ozone lidar validations but need to be better coordinated and take more advantage of assimilation tools. Also, temperature validations face major difficulties caused by atmospheric tides and therefore require intercomparisons with the mobile systems, at all sites.     

Case study of landfill reclamation at a Florida landfill site

A landfill reclamation project was considered to recover landfill airspace and soil, reduce future groundwater impacts by removing the waste buried in the unlined area, and optimize airspace use at the site. A phased approach was utilized to evaluate the technical and economic feasibility of the reclamation project; based on the results of these evaluations, approximately 6.8 ha of the unlined cells were reclaimed. Approximately 371,000 in-place cubic meters of waste was mined from 6.8 ha in this project. Approximately 230,600 cubic meters of net airspace was recovered due to beneficial use of the recovered final cover soil and reclaimed soil as intermediate and daily cover soil, respectively, for the current landfill operations. This paper presents the researchers’ landfill reclamation project experience, including a summary of activities pertaining to reclamation operations, an estimation of reclamation rates achieved during the project, project costs and benefits, and estimated composition of the reclaimed materials.