Application of Fenton's reagent to regenerate activated carbon saturated with organochloro compounds

In this work Fenton's reagent was used to treat activated carbon saturated with organochloro compounds for the oxidation of the adsorbed contaminants and the regeneration of the carbon adsorbent. Activated carbon containing adsorbed chlorinated model substrates such as chlorobenzene, tetrachloroethylene, chloroform or 1,2-dichloropropane was treated with Fenton's reagent at room temperature resulting in a rapid consumption of the organochloro compounds. Thermogravimetric, infrared, BET surface area and MIMS adsorption studies showed that Fenton's treatment has no significant effect on the physico-chemical properties of the activated carbon. The used carbon adsorbents can be efficiently regenerated and recycled with no loss of its adsorption capacity even after five consecutive treatments with Fenton's reagent.     

PCDD/F-contamination in a hexachlorocyclohexane waste site in Rio de Janeiro,Brazil

In the 1950s, a production plant of hexachlorocyclohexane (HCH) was established in Brazil with the main purpose of producing chemicals for vectors control. This factory was closed down in 1955 and around 300 tons of production residues were left behind in the open air. In 1995, the area was treated with lime to eliminate the HCH contamination. Soil sample gave a PCDD/F concentration of 13 900 ng I-TEQ/kg whereas samples from the neighborhood ranged from 0.19 to 2.08 ng I-TEQ/kg. PCDD/F levels in cow's milk samples varied from 4.1 to 6.5 pg I-TEQ/g of milk fat. High concentration in soil collected from the site suggests that treatment and recovery shall be made. Further dioxin monitoring is needed to better estimate the risk posed to local population through food consumption and soil usage.     

New potential mammalian lignan metabolites of environmental phytoestrogens

Seven new dibenzylbutyrolactone and six new dibenzylbutanediol lignans were prepared to assist in the identification of a number of potential mammalian metabolites of the endocrine disrupting plant lignans syringaresinol and medioresinol, present in food.     

15N-Nitrate signature in low-order streams: effects of land cover and agricultural practices.

Many studies have shown that intensive agricultural practices significantly increase the nitrogen concentration of stream surface waters, but it remains difficult to identify, quantify, and differentiate between terrestrial and in-stream sources or sinks of nitrogen, and rates of transformation. In this study we used the delta15N-NO3 signature in a watershed dominated by agriculture as an integrating marker to trace (1) the effects of the land cover and agricultural practices on stream-water N concentration in the upstream area of the hydrographic network, (2) influence of the in-stream processes on the NO3-N loads at the reach scale (100 m and 1000 m long), and (3) changes in delta15N-NO3 signature with increasing stream order (from first to third order). This study suggests that land cover and fertilization practices were the major determinants of delta15N-NO3 signature in first-order streams. NO3-N loads and delta15N-NO3 signature increased with fertilization intensity. Small changes in delta15N-NO3 signature and minor inputs of groundwater were observed along both types of reaches, suggesting the NO3-N load was slightly influenced by in-stream processes. The variability of NO3-N concentrations and delta15N signature decreased with increasing stream order, and the delta15N signature was positively correlated with watershed areas devoted to crops, supporting a dominant effect of agriculture compared to the effect of in-stream N processing. Consequently, land cover and fertilization practices are integrated in the natural isotopic signal at the third-order stream scale. The GIS analysis of the land cover coupled with natural-abundance isotope signature (delta15N) represents a potential tool to evaluate the effects of agricultural practices in rural catchments and the consequences of future changes in management policies at the regional scale.     

A new protocol to measure the effects of toxicants on daphnid-algae interactions

Inhibition of zooplankton grazing by toxicants present at sublethal concentrations in freshwater ecosystems can lead to uncontrolled algal growth and consequently exacerbate eutrophication problems. Short-term measurements of cladoceran grazing inhibition have been reported for some toxicants, but these studies do not mimic the actual interactions between microalgae, daphnids and toxicants, since algal growth is not allowed. On the opposite, algal blooms in complex microcosm or mesocosm assays have been interpreted as consequences on zooplankton, but effects on grazing, survival, growth or reproduction could not be easily discriminated. In this study, a simple assay with daphnids and microalgae is proposed to measure effects on grazing in dynamic conditions (algal growth over 6 days), and applied to copper and lindane. In the same time, direct effects on algal growth can be shown and taken into account. Results are compared with daphnid response measured with different endpoints (immobilization test and static grazing assay). For both toxicants, effects at sublethal concentrations were demonstrated. Copper impaired daphnid grazing at 10 microg/l (60% inhibition) in the 48 h-static test and 15 microg/l (40% inhibition) in the 6 day-dynamic test, whereas 48 h-EC50 for daphnid mobility was 47 microg/l. The EC50s for lindane were 50 microg/l for daphnid grazing (48 h-static and 6 day-dynamic tests) and 383 microg/l for the immobilization test (48 h).     

Mechanical Recycling of PLA Filled with a High Level of Cellulose Fibres

Composites consisting of 30 vol% PLA and 70 vol% cellulose fibres were prepared with compression moulding. In the first part of the study, the recyclability of this composite material was investigated by grinding the material and using the recyclate obtained as a filler for PLA. Thus, the recyclate was compounded with PLA in loadings ranging from 20 to 50 wt%. The composites obtained were characterised by tensile tests, Charpy impact tests, DMTA, and SEM. Tests showed that the recyclate had a relatively good reinforcing effect. Stress at break increased from about 50 to 77 MPa and the modulus increased from 3.6 to 8.5 GPa. In the second part of the study, the ability to mechanically recycle the composites obtained was evaluated by repeated processing. Composite with two loadings of the recyclate (20 wt% and 50 %) was injection moulded repeatedly, six times. Tests showed that the composite material with 20 wt% recyclate could withstand six cycles relatively well, while the composite with the higher load degraded much more quickly. For the composites with 50 wt% recyclate, signs of polymer degradation could be seen already after reprocessing the composite once.     

Heterogeneous electro-Fenton process for degradation of bisphenol A using a new graphene/cobalt ferrite hybrid catalyst

Environmental Science and Pollution Research - A simple, efficient, environmentally friendly, and inexpensive synthesis route was developed to obtain a magnetic nano-hybrid (GH) based on graphene...     

Environmental performance evaluation of agro-industrial innovations – part 1: Ambitec-Life Cycle,a methodological approach for considering life cycle thinking

As sustainability considerations increasingly dominate the technology development debate worldwide, practical approaches to assess environmental performance of innovations have been warranted. The present study (Part 1) introduces Ambitec-Life Cycle, a method derived from Ambitec-Agro for considering life cycle thinking in the environmental performance evaluation (EPE) of agro-industrial innovations. An agro-industrial innovation case study related to residue recycling is presented, revealing steps in the product life cycle where opportunities are best for technological improvements. In Part 2 (this issue) of this study, a methodological approach for considering the environmental vulnerability of watersheds and to integrate this analysis in EPE methods is presented. This approach is applied to Ambitec-Life Cycle and to the same residue case study, allowing the identification of performance indicators with greater potential to cause impacts at the studied watersheds.     

Informal knowledge processes: the underpinning for sustainability outcomes in EIA?

Environmental Impact Assessment (EIA) was originally tailored for restructuring rules and values regarding environmental protection, through interdisciplinary work. EIA has developed as a tool for decision-making for the implementation of projects which potentially pose significant environmental impacts. This paper reviews the sustainability and interdisciplinarity assumptions inherent in EIA. It illustrates through a case study of a proposed landfill extension in Rio Grande do Sul, Brazil, that these principles can arise more from informal knowledge processes than from legal ones. It can be shown that interdisciplinarity is often misunderstood as multidisciplinarity or simple knowledge clustering, and sustainability has no common definition amongst EIA practitioners, but that there predominates an understanding which delivers weak sustainability, driven primarily by social and economic goals. The conclusion is that EIA cannot achieve the original vision set out in the world's first legislation adopted in 1970 unless a learning-organization approach is taken whereby: the critical role of informal knowledge is recognized; informal knowledge is properly managed by EIA teams to engender a common understanding of sustainable development goals; interdisciplinary and transdisciplinary working practices are adopted.