MEAD (part I)--a mathematical model of the long-term dispersion of radioactivity in shelf sea environments

A mathematical model (MEAD) that simulates the transport of radioactivity in shelf-sea environments is presented. In the model it is assumed that the radioactivity can be present in three phases and transport both within and between the phases is captured. The set-up of the model for the Irish Sea is described and results from a simple discharge scenario are presented for (137)Cs and (239)Pu. From these results it appears that MEAD provides a good representation of the transport of radionuclides in the Irish Sea.     

Comparison study of five analytical methods for the fractionation and subsequent determination of aluminium in natural water samples

Five methods for aluminium fractionation used in different laboratories in Norway and Finland were compared using six control, 75 soil water and 10 lake water samples. Different fractionation principles [cation exchange, formation of the Pyrocatechol Violet (PCV) or quinolin-8-ol (oxine) complex], types of cation exchanger [Amberlite (Na/H) or Bond Elut (H)], reaction time (from 2.3 s), flow systems (flow injection analysis or segmented flow) and determination principles (molecular absorption spectrometry or ICP-AES) were tested. Determination of the 'labile' fraction was strongly dependent on the method used and the largest differences were observed between the ICP-AES method with cation exchange (Bond Elut H form) and the 'quickly reacting' method (oxine, 2.3 s). Different flow systems, both using cation exchange and determination of the PCV complex but with different reaction times and an extra acidification step, resulted in large differences in the 'reactive' and 'non-labile' fractions determined. However, the determination of the labile fraction gave similar results with both these methods. The two different types of cation exchanger used (with and without pH buffering and with different counter ions) in the ICP-AES methods resulted in differences, mainly because of a smaller 'non-labile' fraction in the non-buffered system. The two flow injection systems (oxine and PCV complexation) showed common trends, which may be connected with the short reaction times used. Comparison with theoretical equilibrium calculations using the model ALCHEMI suggested that the best correlation for the determination of the 'labile' fraction were obtained with the ICP-AES method with an Amberlite column.     

Fluctuating asymmetry of invertebrate populations as a biological indicator of environmental quality

Fluctuating asymmetry (FA) of populations of the shrimp, Palaemon elegans, and the blood worm, Chironomus salinarius, was used to assess the environmental impact of a fertilizer manufacturing facility on the surrounding marine and freshwater ecosystems, respectively. Populations of both species were found to have elevated levels of asymmetry compared with control populations, indicating that the facility was having a significant impact on organism development. The use of FA of invertebrate populations as a simple, sensitive and cost-effective biomonitoring system for the detection of environmental stress is discussed.     

Simulating the Impact of Cover Degradation on RCRA Landfill Performance

The ability of near‐surface disposal facility cover designs to meet percolation performance criteria is influenced by degradation occurring over long periods of time. This study was conducted to determine the effect of degradation on percolation based on probabilistic distributions derived from historical climate data. Water‐balance predictions were evaluated using the HELP model, employing several variations of degradation in a traditional Resource Conservation and Recovery Act disposal facility cover design over a 100‐year simulation period. Analysis results were evaluated relative to two different selected thresholds for annual percolation (1 mm and 3 mm). Approximately 20 percent of the results did not exceed both the 1‐mm and 3‐mm thresholds, while 10 percent of the realizations exceeded the 1‐mm threshold but not the 3‐mm threshold, with remaining cases exceeding the 3‐mm threshold. These results demonstrate the importance of considering degradation in designing near‐surface disposal facilities, especially given the very long performance periods desired by different regulators. © 2013 Wiley Periodicals, Inc.     

Improved VOC bioremediation using a fluidized bed peat bioreactor

A gas–solid fluidized bed bioreactor was successfully used to treat air contaminated with a volatile organic compound (VOC). A bioreactor containing both a fluidized and packed bed of moist peat granules removed ethanol, a representative VOC, from an air stream. The fluidized bed operation mode of the bioreactor outperformed the packed bed mode. The maximum elimination capacity (EC) of ethanol in the fluidized mode was 1520 g m⁻³ h⁻¹, with removal efficiencies ranging between 45 and 100%, at loadings up to 3400 g m⁻³ h⁻¹. Maximum EC was 530 g m⁻³ h⁻¹ in the packed bed mode. Removal efficiency in the fluidized bioreactor was best at the lowest velocity, where the bubbling bed fluidization regime predominated. As gas velocity increased, the size and amount of large bubbles (slugs) increased and removal efficiency decreased while elimination capacity increased.     

Modeling Streams and Hydrogeomorphic Attributes in Oregon From Digital and Field Data1

Abstract: Managers, regulators, and researchers of aquatic ecosystems are increasingly pressed to consider large areas. However, accurate stream maps with geo‐referenced attributes are uncommon over relevant spatial extents. Field inventories provide high‐quality data, particularly for habitat characteristics at fine spatial resolutions (e.g., large wood), but are costly and so cover relatively small areas. Recent availability of regional digital data and Geographic Information Systems software has advanced capabilities to delineate stream networks and estimate coarse‐resolution hydrogeomorphic attributes (e.g., gradient). A spatially comprehensive coverage results, but types of modeled outputs may be limited and their accuracy is typically unknown. Capitalizing on strengths in both field and regional digital data, we modeled a synthetic stream network and a variety of hydrogeomorphic attributes for the Oregon Coastal Province. The synthetic network, encompassing 96,000 km of stream, was derived from digital elevation data. We used high‐resolution but spatially restricted data from field inventories and streamflow gauges to evaluate, calibrate, and interpret hydrogeomorphic attributes modeled from digital elevation and precipitation data. The attributes we chose to model (drainage area, mean annual precipitation, mean annual flow, probability of perennial flow, channel gradient, active‐channel width and depth, valley‐floor width, valley‐width index, and valley constraint) have demonstrated value for stream research and management. For most of these attributes, field‐measured, and modeled values were highly correlated, yielding confidence in the modeled outputs. The modeled stream network and attributes have been used for a variety of purposes, including mapping riparian areas, identifying headwater streams likely to transport debris flows, and characterizing the potential of streams to provide high‐quality habitat for salmonids. Our framework and models can be adapted and applied to areas where the necessary field and digital data exist or can be obtained.     

Dioxin-like compounds in Australian sewage sludge--review and national survey

An Australian survey of dioxin-like compounds in sewage sludge was conducted in two parts (a) a national survey, and (b) a time-study. All sewage sludge samples analysed as part of these studies had low overall concentrations of dioxin-like compounds. Out of 37 samples, all except one, were within the reported concentration range of soil within the Australian environment. The mean concentration of dioxin-like compounds in the Australian sewage sludge survey of 2006 was found to be 5.6 (s.d. 4.5) ng WHO(05) TEQkg(-1) (n=14) and were within the range of 1.2-15.3 ng WHO(05) TEQ kg(-1). All the Australian sewage sludge samples cited in these studies were below the Victorian EPA "investigation limit" of 50 ng WHO(98) TEQ kg(-1), and well below the European proposed guidelines of 100 ng I-TEQ kg(-1). The burden of dioxin-like compounds in Australian sewage sludge is low and its land application as biosolids is not likely to pose a problem. A general positive relationship was found between population of the town producing the waste and both dioxin-like PCDD/Fs and dioxin-like PCBs. The one exception to this trend was sludge from a town that had a history of smelting and had a relatively high burden of dioxin-like compounds. Sludge from one rural WWTP also had a higher burden of dioxin-like compounds. The treatment plant services a geographically isolated town with a low population and no known emitters of dioxin-like compounds. However, this sample also had a relatively high burden of dioxin-like PCBs, which could be the source of the dioxin-like PCDD/Fs found in this sludge. The time study analyzing sludges from three WWTP from the same city between the years 2002 and 2006 found no apparent difference between WWTPs, but a statistically significant decline of 1.49 ng WHO(05) TEQ kg(-1) per year. Also, a comprehensive review of the scientific literature, presents typical levels and sources of dioxin-like compounds in international sewage sludges.