Microbiological characterization and specific methanogenic activity of anaerobe sludges used in urban solid waste treatment

This study presents the microbiological characterization of the anaerobic sludge used in a two-stage anaerobic reactor for the treatment of organic fraction of urban solid waste (OFUSW). This treatment is one alternative for reducing solid waste in landfills at the same time producing a biogas (CH(4) and CO(2)) and an effluent that can be used as biofertilizer. The system was inoculated with sludge from a wastewater treatment plant (WWTP) (Río Frío Plant in Bucaramanga-Colombia) and a methanogenic anaerobic digester for the treatment of pig manure (Mesa de los Santos in Santander). Bacterial populations were evaluated by counting groups related to oxygen sensitivity, while metabolic groups were determined by most probable number (MPN) technique. Specific methanogenic activity (SMA) for acetate, formate, methanol and ethanol substrates was also determined. In the acidogenic reactor (R1), volatile fatty acids (VFA) reached values of 25,000 mg L(-1) and a concentration of CO(2) of 90%. In this reactor, the fermentative population was predominant (10(5)-10(6)MPN mL(-1)). The acetogenic population was (10(5)MPN mL(-1)) and the sulphate-reducing population was (10(4)-10(5)MPN mL(-1)). In the methanogenic reactor (R2), levels of CH(4) (70%) were higher than CO(2) (25%), whereas the VFA values were lower than 4000 mg L(-1). Substrate competition between sulphate-reducing (10(4)-10(5)MPN mL(-1)) and methanogenic bacteria (10(5)MPN mL(-1)) was not detected. From the SMA results obtained, acetoclastic (2.39 g COD-CH(4)g(-1)VSS(-1)day(-1)) and hydrogenophilic (0.94 g COD-CH(4)g(-1)VSS(-1)day(-1)) transformations as possible metabolic pathways used by methanogenic bacteria is suggested from the SMA results obtained. Methanotrix sp., Methanosarcina sp., Methanoccocus sp. and Methanobacterium sp. were identified.     

Preparation and Properties of Chitosan–PVA Fibers Produced by Wet Spinning

Chitosan fibers were prepared by wet spinning in three stages. Initially, a polymer solution of chitosan and polyvinyl alcohol (PVA) was solidified in a mixture of potassium hydroxide and ethanol. The polymers were then crosslinked with sodium tripolyphosphate (TPP) or glutaraldehyde, and finally dried in methanol or acetone. The effect of these conditions was evaluated based on scanning electron microscopy images, water-holding capacity, and swelling and mechanical properties. The miscibility of the mixture was evaluated using Fourier Transform Infrared spectroscopy and differential scanning calorimetry. The results obtained showed that chitosan fibers containing 45% (v/v) PVA and crosslinked using TPP have properties similar to those of commercial sutures prepared using other biomaterials.     

Passive air sampling for persistent organic pollutants: introductory remarks to the special issue

There have been a number of developments in the need, design and use of passive air samplers (PAS) for persistent organic pollutants (POPs). This article is the first in a Special Issue of the journal to review these developments and some of the data arising from them. We explain the need and benefit of developing PAS for POPs, the different approaches that can be used, and highlight future developments and needs.     

Environmental risks of farmed and barren alkaline coal ash landfills in Tuzla, Bosnia and Herzegovina

The disposal of coal combustion residues (CCR) has led to a significant consumption of land in the West Balkan region. In Tuzla (Bosnia and Herzegovina) we studied previously soil-covered (farmed) and barren CCR landfills including management practises, field ageing of CCR and the transfer of trace elements into crops, wild plants and wastewaters. Soil tillage resulted in mixing of cover soil with CCR. Medicago sativa showed very low Cu:Mo ratios (1.25) which may cause hypocuprosis in ruminants. Total loads of inorganic pollutants in the CCR transport water, but not pH ( approximately 12), were below regulatory limits of most EU countries. Arsenic concentrations in CCR transport water were <2microgl(-1) whereas reductive conditions in an abandoned landfill significantly enhanced concentrations in leachates (44microgl(-1)). The opposite pattern was found for Cr likely due to large initial leaching of CrVI. Public use of landfills, including farming, should be based on a prior risk assessment due to the heterogeneity of CCR.     

Emission factors of atmospheric and climatic pollutants from crop residues burning

Biomass burning is a common agricultural practice, because it allows elimination of postharvesting residues; nevertheless, it involves an inefficient combustion process that generates atmospheric pollutants emission, which has implications on health and climate change. This work focuses on the estimation of emission factors (EFs) of PM_2.5, PM₁₀, organic carbon (OC), elemental carbon (EC), carbon monoxide (CO), carbon dioxide (CO₂), and methane (CH₄) of residues from burning alfalfa, barley, beans, cotton, maize, rice, sorghum, and wheat in Mexico. Chemical characteristics of the residues were determined to establish their relationship with EFs, as well as with the modified combustion efficiency (MCE). Essays were carried out in an open combustion chamber with isokinetic sampling, following modified EPA 201-A method. EFs did not present statistical differences among different varieties of the same crop, but were statistically different among different crops, showing that generic values of EFs for all the agricultural residues can introduce significant uncertainties when used for climatic and atmospheric pollutant inventories. EFs of PM_2.5 ranged from 1.19 to 11.30 g kg^?1, and of PM₁₀ from 1.77 to 21.56 g kg^?1. EFs of EC correlated with lignin content, whereas EFs of OC correlated inversely with carbon content. EFs of EC and OC in PM_2.5 ranged from 0.15 to 0.41 g kg^?1 and from 0.33 to 5.29 g kg^?1, respectively, and in PM₁₀, from 0.17 to 0.43 g kg^?1 and from 0.54 to 11.06 g kg^?1. CO₂ represented the largest gaseous emissions volume with 1053.35–1850.82 g kg^?1, whereas the lowest was CH₄ with 1.61–5.59 g kg^?1. CO ranged from 28.85 to 155.71 g kg^?1, correlating inversely with carbon content and MCE. EFs were used to calculate emissions from eight agricultural residues burning in the country during 2016, to know the potential mitigation of climatic and atmospheric pollutants, provided this practice was banned.

Implications: The emission factors of particles, short-lived climatic pollutants, and atmospheric pollutants from the crop residues burning of eight agricultural wastes crops, determined in this study using a standardized method, provides better knowledge of the emissions of those species in Latin America and other developing countries, and can be used as inputs in air quality models and climatic studies. The EFs will allow the development of more accurate inventories of aerosols and gaseous pollutants, which will lead to the design of effective mitigation strategies and planning processes for sustainable agriculture.     

Genotype-specific responses of fluctuating asymmetry and of preadult survival to the effects of lead and temperature stress in Drosophila melanogaster

Although fluctuating asymmetry (FA) increases with exposure to certain types of environmental stressors such as temperature extremes, relatively little is known about the effects of interaction (e.g., synergism) between known sources of environmental stress on FA. Knowledge of such interaction effects, and of the magnitude of genotype-by-environment interaction, are of fundamental importance toward predicting the usefulness of FA as a bioindicator of environmental pollution. We tested for synergistic effects on FA between elevated temperature and exposure to lead, and examined FA responses simultaneously in four genetic strains of Drosophila melanogaster known to differ in their degree of developmental instability, and presumably in their buffering capacity. In the absence of heavy metal, bristle FA increased with temperature, but in the presence of lead, FA at high temperature (30 (degrees)C) was reduced to levels similar, or below, that at lower temperature (25 (degrees)C). This temperature by lead interaction was statistically significant, but paradoxical in that the disruptive effects of temperature appeared to be attenuated in the presence of the heavy metal. In no case was there a significant effect of lead on bristle FAs, despite documented assimilation of heavy metal by flies, and in no case was the genotype by environment interaction significant. Whereas lead treatment did not influence survival, survival was reduced at the high temperature, but significantly so only in one genetic strain (Oregon-R). There was no relationship between survival and FA across stress treatments within lines. Thus, any disproportionate stress-induced mortality in developmentally unstable classes (developmental selection) was unlikely to bias the FA results. Our results underscore the need for independent replication of significant findings before FA-based biomonitoring can be responsibly and effectively implemented. The results call for caution in using FA as a biomarker of stress, because stress factors may interact in complex and unpredictable ways, which could result in erroneous conclusions about real levels of stress present in field populations, under the unduly simplistic assumption that stress factors will act additively to increase FA.     

Biotic and abiotic transformations of methyl tertiary butyl ether (MTBE)

Background Methyl tertiary butyl ether (MTBE) is a fuel additive which is used all over the world. In recent years it has often been found in groundwater, mainly in the USA, but also in Europe. Although MTBE seems to be a minor toxic, it affects the taste and odour of water at concentrations of < 30 μg/L. Although MTBE is often a recalcitrant compound, it is known that many ethers can be degraded by abiotic means. The aim of this study was to examine biotic and abiotic transformations of MTBE with respect to the particular conditions of a contaminated site (former refinery) in Leuna, Germany. Methods Groundwater samples from wells of a contaminated site were used for aerobic and anaerobic degradation experiments. The abiotic degradation experiment (hydrolysis) was conducted employing an ion-exchange resin and MTBE solutions in distilled water. MTBE, tertiary butyl formate (TBF) and tertiary butyl alcohol (TBA) were measured by a gas chromatograph with flame ionisation detector (FID). Aldehydes and organic acids were respectively analysed by a gas chromatograph with electron capture detector (ECD) and high-performance ion chromatography (HPIC). Results and Discussion Under aerobic conditions, MTBE was degraded in laboratory experiments. Only 4 of a total of 30 anaerobic experiments exhibited degradation, and the process was very slow. In no cases were metabolites detected, but a few degradation products (TBF, TBA and formic acid) were found on the site, possibly due to the lower temperatures in groundwater. The abiotic degradation of MTBE with an ion-exchange resin as a catalyst at pH 3.5 was much faster than hydrolysis in diluted hydrochloric acid (pH 1.0). Conclusion Although the aerobic degradation of MTBE in the environment seems to be possible, the specific conditions responsible are widely unknown. Successful aerobic degradation only seems to take place if there is a lack of other utilisable compounds. However, MTBE is often accompanied by other fuel compounds on contaminated sites and anaerobic conditions prevail. MTBE is often recalcitrant under anaerobic conditions, at least in the presence of other carbon sources. The abiotic hydrolysis of MTBE seems to be of secondary importance (on site), but it might be possible to enhance it with catalysts. Recommendation and Outlook MTBE only seems to be recalcitrant under particular conditions. In some cases, the degradation of MTBE on contaminated sites could be supported by oxygen. Enhanced hydrolysis could also be an alternative. - * The basis of this peer-reviewed paper is a presentation at the 9th FECS Conference on 'Chemistry and Environment', 29 August to 1 September 2004, Bordeaux, France.